84330CVIT

84330CVIT Datasheet

ICS84330CI

Part	Datasheet
84330CVIT	84330CVIT (pdf)

Related Parts	Information
84330CVI	84330CVI

PDF Datasheet Preview
720MHz, Low Jitter, Crystal-to-LVPECL Frequency Synthesizer ICS84330CI DATA SHEET The ICS84330CI is a general purpose, single output high frequency synthesizer. The VCO operates at a frequency range of 250MHz to 720MHz. The VCO and output frequency can be programmed using the serial or parallel interfaces to the configuration logic. The output can be configured to divide the VCO frequency by 1, 2, 4, and Output frequency steps as small as 250kHz to 2MHz can be achieved using a 16MHz crystal depending on the output divider settings. • Fully integrated PLL, no external loop filter requirements • One differential 3.3V LVPECL output • Crystal oscillator interface 10MHz to 25MHz • Output frequency range 31.25MHz to 720MHz • VCO range 250MHz to 720MHz • Parallel or serial interface for programming M and N dividers during power-up • RMS period jitter 6ps maximum • Cycle-to-cycle jitter 40ps maximum • 3.3V supply voltage • -40°C to 85°C ambient operating temperature • Available in both standard RoHS5 and lead-free RoHS 6 packages Pin Assignments VEE TEST VCC VEE nFOUT FOUT VCC Block Diagram XTAL1 XTAL2 FREF_EXT Pullup OSC Pulldown XTAL_SEL Pullup ÷ 16 PLL PHASE DETECTOR ÷4 ÷8 S_LOAD S_DATA S_CLOCK nP_LOAD Pulldown Pullup M0:M8 N0:N1 Pullup CONFIGURATION INTERFACE LOGIC FOUT nFOUT TEST 25 24 23 22 21 20 19 S_CLOCK 26 18 N1 S_DATA 27 ICS84330CI 17 N0 S_LOAD 28 28 Lead PLCC 16 M8 VCCA 1 V Package 15 M7 11.6mm x 11.4mm x 4.1mm Ordering Information Table Ordering Information Part/Order Number 84330CVI 84330CVIT 84330CVILF 84330CVILFT 84330CYI 84330CYIT 84330CYILF 84330CYILFT Marking ICS84330CVI ICS84330CVILF ICS84330CYI ICS84330CYIL Package 28 Lead PLCC 28 Lead PLCC Lead-Free, 28 Lead PLCC Lead-Free, 28 Lead PLCC 32 Lead LQFP 32 Lead LQFP Lead-Free, 32 Lead LQFP Lead-Free, 32 Lead LQFP Shipping Packaging Tube 500 Tape & Reel Tube 500 Tape & Reel Tube 1000 Tape & Reel Tube 1000 Tape & Reel Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. 2011 Integrated Device Technology, Inc. ICS84330CI Data Sheet 720MHZ, CRYSTAL-TO-LVPECL FREQUENCY SYNTHESIZER T10A Page 1 8 17 18 6 9 Description of Change Features Section - corrected Output Frequency Range from 25MHz to 31.25MHz. Added Recommendations for Unused Input and Output Pins. Package Dimension Table - D2/E2 changed the min. from to and the max. from to Converted datasheet format. Ordering Information - Added “Lead-Free” marking for the PLCC and LQFP packages. AC Characteristics Table - due to datasheet format conversion, corrected cycle-to-cycle test conditions back to original conditions. Updated Overdriving the XTAL Interface. Updated new Header/Footer format. Date 12/7/04 2/2/09 2/19/09 1/7/11 2011 Integrated Device Technology, Inc. ICS84330CI Data Sheet 720MHZ, CRYSTAL-TO-LVPECL FREQUENCY SYNTHESIZER We’ve Got Your Timing Solution 6024 Silver Creek Valley Road San Jose, California 95138 Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright All rights reserved.

PDF Datasheet Preview

720MHz, Low Jitter, Crystal-to-LVPECL Frequency Synthesizer

ICS84330CI

DATA SHEET

The ICS84330CI is a general purpose, single output high frequency synthesizer. The VCO operates at a frequency range of 250MHz to 720MHz. The VCO and output frequency can be programmed using the serial or parallel interfaces to the configuration logic. The output can be configured to divide the VCO frequency by 1, 2, 4, and Output frequency steps as small as 250kHz to 2MHz can be achieved using a 16MHz crystal depending on the output divider settings.
• Fully integrated PLL, no external loop filter requirements
• One differential 3.3V LVPECL output
• Crystal oscillator interface 10MHz to 25MHz
• Output frequency range 31.25MHz to 720MHz
• VCO range 250MHz to 720MHz
• Parallel or serial interface for programming M and N dividers
during power-up
• RMS period jitter 6ps maximum
• Cycle-to-cycle jitter 40ps maximum
• 3.3V supply voltage
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS5 and lead-free RoHS 6
packages

Pin Assignments

VEE TEST

VCC VEE nFOUT FOUT VCC

Block Diagram

XTAL1

XTAL2 FREF_EXT

Pullup

OSC Pulldown

XTAL_SEL

Pullup
÷ 16

PLL PHASE DETECTOR
÷4 ÷8

S_LOAD S_DATA S_CLOCK nP_LOAD

Pulldown Pullup

M0:M8 N0:N1

Pullup

CONFIGURATION INTERFACE LOGIC

FOUT nFOUT

TEST
25 24 23 22 21 20 19

S_CLOCK 26
18 N1

S_DATA 27

ICS84330CI
17 N0

S_LOAD 28
28 Lead PLCC
16 M8

VCCA 1

V Package
15 M7
11.6mm x 11.4mm x 4.1mm
Ordering Information
Table Ordering Information

Part/Order Number 84330CVI 84330CVIT 84330CVILF 84330CVILFT 84330CYI 84330CYIT 84330CYILF 84330CYILFT

Marking ICS84330CVI ICS84330CVILF ICS84330CYI ICS84330CYIL

Package 28 Lead PLCC 28 Lead PLCC Lead-Free, 28 Lead PLCC Lead-Free, 28 Lead PLCC 32 Lead LQFP 32 Lead LQFP Lead-Free, 32 Lead LQFP Lead-Free, 32 Lead LQFP

Shipping Packaging Tube
500 Tape & Reel Tube
500 Tape & Reel Tube
1000 Tape & Reel Tube
1000 Tape & Reel

Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
2011 Integrated Device Technology, Inc.

ICS84330CI Data Sheet
720MHZ, CRYSTAL-TO-LVPECL FREQUENCY SYNTHESIZER

T10A

Page 1 8 17
18 6 9

Description of Change

Features Section - corrected Output Frequency Range from 25MHz to 31.25MHz.

Added Recommendations for Unused Input and Output Pins. Package Dimension Table - D2/E2 changed the min. from to and the max. from to Converted datasheet format.
Ordering Information - Added “Lead-Free” marking for the PLCC and LQFP packages.

AC Characteristics Table - due to datasheet format conversion, corrected cycle-to-cycle test conditions back to original conditions. Updated Overdriving the XTAL Interface. Updated new Header/Footer format.

Date 12/7/04 2/2/09 2/19/09 1/7/11
2011 Integrated Device Technology, Inc.

ICS84330CI Data Sheet
720MHZ, CRYSTAL-TO-LVPECL FREQUENCY SYNTHESIZER

We’ve Got Your Timing Solution
6024 Silver Creek Valley Road San Jose, California 95138

Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

Technical Support
+480-763-2056

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84330CVIT Datasheet file may be downloaded here without warranties.

Datasheet ID: 84330CVIT 637120