BMI-S-230-C

BMI-S-230-C Datasheet

BMI-S-230-C

Part	Datasheet
BMI-S-230-C	BMI-S-230-C (pdf)

PDF Datasheet Preview
8 D C B DATE APPROVED A INITAL RELEASE 4/28/2011 MF SECTION E-E SCALE 15 1 X TYP R0.406 TYP TYP X TOLERANCE/APPEARANCE: A. NO CHANGE IN PRODUCTION MATERIAL SHALL BE ALLOWED WITHOUT EXPLICIT PRIOR WRITTEN APPROVAL FROM LAIRD TECHNOLOGIES ENGINEERING DEPARTMENT. B. PARTS SHALL BE FREE OF SHARP EDGES. BURRS SHALL NOT EXCEED 10% OF MATERIAL THICKNESS OR 0.15mm WHICHEVER IS LESS. C. REFERENCE DIMENSIONS, SHOWN IN PARENTHESES DIM , ARE WITHOUT TOLERANCE AND ARE FOR INFORMATION PURPOSES ONLY. D. CRITICAL DIMENSIONS ARE DESIGNATED BY X E. ALL RADII ARE TO BE R0.25 UNLESS OTHERWISE SPECIFIED. F. PART SHALL BE FREE OF OIL OR GREASE G. BULK LAYER By Brian Donahue at 10:14 am, Oct 18, 2011 A Block tolerances apply to This 2d drawing is generated metric units only. Dual from a 3d solid model. Refer dimensions shown are for to 3d model for any dimensions reference only and are not shown on this drawing. 3d displayed in 3 places for model dimensions will always conversion purposes only. take precedent over drawing dimensions. CAD MAINTAINED DRAWING. MANUAL CHANGES UNAUTHORIZED STD PART REFERENCE: 0077-00xx UNITS MM INCH TOLERANCES: .X = .XX = .XXX = ANGULAR X.X = X.XX =

PDF Datasheet Preview

8 D C B

DATE APPROVED

A INITAL RELEASE
4/28/2011 MF

SECTION E-E

SCALE 15 1

X TYP

R0.406 TYP

TYP X

TOLERANCE/APPEARANCE:

A. NO CHANGE IN PRODUCTION MATERIAL

SHALL BE ALLOWED WITHOUT EXPLICIT

PRIOR WRITTEN APPROVAL FROM LAIRD

TECHNOLOGIES ENGINEERING DEPARTMENT.

B. PARTS SHALL BE FREE OF SHARP EDGES. BURRS SHALL NOT EXCEED 10% OF MATERIAL

THICKNESS OR 0.15mm WHICHEVER IS LESS.

C. REFERENCE DIMENSIONS, SHOWN IN PARENTHESES DIM , ARE WITHOUT

TOLERANCE AND ARE FOR INFORMATION

PURPOSES ONLY.

D. CRITICAL DIMENSIONS ARE DESIGNATED BY X

E. ALL RADII ARE TO BE R0.25 UNLESS OTHERWISE SPECIFIED.

F. PART SHALL BE FREE OF OIL OR GREASE

G. BULK LAYER

By Brian Donahue at 10:14 am, Oct 18, 2011 A

Block tolerances apply to

This 2d drawing is generated
metric units only. Dual
from a 3d solid model. Refer
dimensions shown are for
to 3d model for any dimensions reference only and are
not shown on this drawing. 3d displayed in 3 places for
model dimensions will always
conversion purposes only.
take precedent over drawing dimensions.

CAD MAINTAINED DRAWING. MANUAL CHANGES UNAUTHORIZED

STD PART REFERENCE:
0077-00xx

UNITS MM INCH

TOLERANCES:
.X = .XX = .XXX =

ANGULAR X.X = X.XX =

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BMI-S-230-C Datasheet file may be downloaded here without warranties.

Datasheet ID: BMI-S-230-C 644913