84330CVLNT

84330CVLNT Datasheet

ICS84330C

Part	Datasheet
84330CVLNT	84330CVLNT (pdf)

Related Parts	Information
84330CYLN	84330CYLN
84330CYLNT	84330CYLNT
84330CY	84330CY
84330CYT	84330CYT
84330CVT	84330CVT
84330CV	84330CV
84330CVLN	84330CVLN

PDF Datasheet Preview
700MHz, Low Jitter, Crystal-to-3.3V Differential LVPECL Frequency Synthesizer ICS84330C DATA SHEET The ICS84330C is a general purpose, single output high frequency synthesizer and a member of the HiPerClockS family of High Performance Clock Solutions from IDT. The VCO operates at a frequency range of 250MHz to 700MHz. The VCO and output frequency can be programmed using the serial or parallel interfaces to the configuration logic. The output can be configured to divide the VCO frequency by 1, 2, 4, and Output frequency steps as small as 250kHz to 2MHz can be achieved using a 16MHz crystal depending on the output divider settings. Pin Assignment VCC FOUT nFOUT VEE VCC TEST VEE 32 31 30 29 28 27 26 25 S_CLOCK 1 24 nc S_DATA 2 S_LOAD 3 ICS84330C 32 Lead VFQFN 23 N1 22 N0 VCCA 4 K Package 21 M8 VCCA 5 5mm x 5mm x 0.925mm 20 M7 FREF_EXT 6 XTAL_SEL 7 package body Top View 19 M6 18 M5 XTAL1 8 17 M4 9 10 11 12 13 14 15 16 XTAL2 OE nP_LOAD M0 M1 M2 M3 nc Block Diagram Pullup • Fully integrated PLL, no external loop filter requirements • One differential 3.3V LVPECL output • Crystal oscillator interface 10MHz to 25MHz • Output frequency range 31.25MHz to 700MHz • VCO range 250MHz to 700MHz • Parallel or serial interface for programming M and N dividers during power-up • RMS period jitter 5ps maximum • Cycle-to-cycle jitter 40ps maximum • 3.3V supply voltage • 0°C to 70°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages Pin Assignments VEE TEST Ordering Information Table Ordering Information Part/Order Number 84330CV 84330CVT 84330CVLN 84330CVLNT 84330CY 84330CYT 84330CYLN 84330CYLNT 84330CKLF 84330CKLFT Marking ICS84330CV ICS84330CVLN ICS84330CY ICS84330CYLN ICS84330CKL Package 28 Lead PLCC 28 Lead PLCC “Lead-Free” 28 Lead PLCC “Lead-Free” 28 Lead PLCC 32 Lead LQFP 32 Lead LQFP “Lead-Free/Annealed” 32 Lead LQFP “Lead-Free/Annealed” 32 Lead LQFP “Lead-Free” 32 Lead VFQFN “Lead-Free” 32 Lead VFQFN Shipping Packaging Tube 500 Tape & Reel Tube 500 Tape & Reel Tube 1000 Tape & Reel Tube 1000 Tape & Reel Tray 2500 Tape & Reel Temperature 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C NOTE Parts that are ordered with an "LN" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. 2009 Integrated Device Technology, Inc. ICS84330C Data Sheet 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER T10A D T10C T11 Page 2 3 6 8 5 18 1 18 1 4 13 - 14 8 17 1 5 18 19 Description of Change Updated Parallel & Serial Load Operations Diagram. Pin Description Table - description to TEST output should read Single-ended LVPECL interface levels instead of LVCMOS/LVTTL interface levels. LVCMOS Table - VOH/VOL levels added TEST pin and changed VOH min. from 2.6V to VCC - 1.4V changed VOL max. from 0.5V to VCC - 1.7V. Crystal Characteristics Table - changed ESR from max. to max. Updated LVPECL Output Termination diagrams. Deleted VOH & VOL row entries from LVCMOS Table. Added Lead-Free/Annealed to the Part Ordering Information Table. Features Section added Lead-Free bullet. Ordering Information Table - added PLCC Lead-Free part number. Features Section - corrected Output Frequency Range from 25MHz to 31.25MHz Parallel & Serial Mode Function Table - corrected 3rd line in S_LOAD column from “X” to “L”. LVPECL DC Characteristics Table - corrected VOH max. from VCC -1.0V to VCC -0.9V. Power Considerations - corrected power dissipation to reflect VOH max. in Table 4C. Added Recommendations for Unused Input and Output Pins. Package Dimension Table - D2/E2 changed the min. from to and the max. from to Added 32 VFQFN Pin Assignment. Absolute Maximum Ratings - add 32 VFQFN Package Thermal Impedance. Added 32 VFQFN Package Dimensions and Diagram. Ordering Information Table - added 32 VFQFN ordering information. 8/28/03 9/10/03 6/1/04 10/5/04 12/7/04 4/10/07 1/28/09 7/17/09 2009 Integrated Device Technology, Inc. ICS84330C Data Sheet 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER 6024 Silver Creek Valley Road San Jose, California 95138 Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright All rights reserved.

PDF Datasheet Preview

700MHz, Low Jitter, Crystal-to-3.3V Differential LVPECL Frequency Synthesizer

ICS84330C

DATA SHEET

The ICS84330C is a general purpose, single output
high frequency synthesizer and a member of the

HiPerClockS family of High Performance Clock

Solutions from IDT. The VCO operates at a frequency
range of 250MHz to 700MHz. The VCO and output
frequency can be programmed using the serial or parallel interfaces
to the configuration logic. The output can be configured to divide the

VCO frequency by 1, 2, 4, and Output frequency steps as small as
250kHz to 2MHz can be achieved using a 16MHz crystal depending
on the output divider settings.

Pin Assignment

VCC FOUT nFOUT VEE VCC TEST VEE
32 31 30 29 28 27 26 25

S_CLOCK 1
24 nc

S_DATA 2 S_LOAD 3

ICS84330C 32 Lead VFQFN
23 N1 22 N0

VCCA 4

K Package
21 M8

VCCA 5 5mm x 5mm x 0.925mm 20 M7

FREF_EXT 6 XTAL_SEL 7
package body Top View
19 M6 18 M5

XTAL1 8
17 M4
9 10 11 12 13 14 15 16

XTAL2 OE
nP_LOAD M0 M1 M2 M3 nc

Block Diagram

Pullup
• Fully integrated PLL, no external loop filter requirements
• One differential 3.3V LVPECL output
• Crystal oscillator interface 10MHz to 25MHz
• Output frequency range 31.25MHz to 700MHz
• VCO range 250MHz to 700MHz
• Parallel or serial interface for programming M and N dividers during
power-up
• RMS period jitter 5ps maximum
• Cycle-to-cycle jitter 40ps maximum
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6
packages

Pin Assignments

VEE TEST
Ordering Information
Table Ordering Information

Part/Order Number 84330CV 84330CVT 84330CVLN 84330CVLNT 84330CY 84330CYT 84330CYLN 84330CYLNT 84330CKLF 84330CKLFT

Marking ICS84330CV ICS84330CVLN ICS84330CY ICS84330CYLN ICS84330CKL

Package 28 Lead PLCC 28 Lead PLCC “Lead-Free” 28 Lead PLCC “Lead-Free” 28 Lead PLCC 32 Lead LQFP 32 Lead LQFP “Lead-Free/Annealed” 32 Lead LQFP “Lead-Free/Annealed” 32 Lead LQFP “Lead-Free” 32 Lead VFQFN “Lead-Free” 32 Lead VFQFN

Shipping Packaging Tube
500 Tape & Reel Tube
500 Tape & Reel Tube
1000 Tape & Reel Tube
1000 Tape & Reel Tray
2500 Tape & Reel

Temperature 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C

NOTE Parts that are ordered with an "LN" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
2009 Integrated Device Technology, Inc.

ICS84330C Data Sheet
700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER

T10A

D T10C T11

Page 2 3
6 8 5 18 1 18 1 4
13 - 14 8 17
1 5 18 19

Description of Change

Updated Parallel & Serial Load Operations Diagram. Pin Description Table - description to TEST output should read Single-ended LVPECL interface levels instead of LVCMOS/LVTTL interface levels. LVCMOS Table - VOH/VOL levels added TEST pin and changed VOH min. from 2.6V to VCC - 1.4V changed VOL max. from 0.5V to VCC - 1.7V. Crystal Characteristics Table - changed ESR from max. to max. Updated LVPECL Output Termination diagrams.

Deleted VOH & VOL row entries from LVCMOS Table.
Added Lead-Free/Annealed to the Part Ordering Information Table.
Features Section added Lead-Free bullet. Ordering Information Table - added PLCC Lead-Free part number.

Features Section - corrected Output Frequency Range from 25MHz to 31.25MHz

Parallel & Serial Mode Function Table - corrected 3rd line in S_LOAD column from “X” to “L”. LVPECL DC Characteristics Table - corrected VOH max. from VCC -1.0V to VCC -0.9V. Power Considerations - corrected power dissipation to reflect VOH max. in Table 4C.

Added Recommendations for Unused Input and Output Pins. Package Dimension Table - D2/E2 changed the min. from to and the max. from to
Added 32 VFQFN Pin Assignment. Absolute Maximum Ratings - add 32 VFQFN Package Thermal Impedance. Added 32 VFQFN Package Dimensions and Diagram. Ordering Information Table - added 32 VFQFN ordering information.
8/28/03
9/10/03 6/1/04 10/5/04 12/7/04 4/10/07
1/28/09
7/17/09
2009 Integrated Device Technology, Inc.

ICS84330C Data Sheet
700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER
6024 Silver Creek Valley Road San Jose, California 95138

Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

Technical Support
+480-763-2056

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84330CVLNT Datasheet file may be downloaded here without warranties.

Datasheet ID: 84330CVLNT 637119