FLIR ONE - IOS

FLIR ONE - IOS Datasheet

FLIR ONE QUICK START

Part	Datasheet
FLIR ONE - IOS	FLIR ONE - IOS (pdf)

PDF Datasheet Preview
USER GUIDE Second Generation For Apple iOS FLIR ONE QUICK START STEP 1 Charge the FLIR ONETM with the included USB power cable connected to a 1A power source. The Charge Indicator LED next to the USB connection blinks on and off while the FLIR ONE is charging and stays on continuously when it is fully charged. Once the FLIR ONE is charged, attached it to the phone. Note iOS model The power cable for the iPhone with a Lightning connector will not work with the FLIR Ensure the FLIR ONE is fully charged before using it the first time. A charging cycle takes approximately one hour. STEP 2 Download and install the FLIR app, which is available on the Apple App Store℠. When you start the FLIR ONE app, a short tutorial will be displayed to help you get started with the FLIR ONE. STEP 3 Press the power button on the side of the FLIR ONE to turn it on. Initially, the indicator light will turn orange, and then it will flash green when the device is ready. USER GUIDE 2 STEP 4 Once an image is displayed, tap the color palette icon in the lower right to change how the image is displayed. Select one of the displayed color or grayscale palettes. APP OVERVIEW The camera is in photo mode as indicated just below the image. Tap the round blue icon at the bottom of the screen to save a photo image. On the display, swipe left or right to select a different mode Video, Pano, or Time-Lapse . These modes are described in a later section of the manual. The image that displays in the app is a combination of a thermal image and a daylight image through a unique process called MSX. The FLIR ONE thermal camera can produce an image even in total darkness. When visible light is available, the FLIR ONE daylight camera is used to enhance the detail of the FLIR ONE thermal camera. For close up scenes, it is possible to optimize the way the daylight and thermal images are blended. Tap and hold the image to bring up a slider control at the bottom of the image. Moving the slider left or right changes the way the visible and thermal images are aligned. Optimizing the image is described in more detail on page PALETTE SCREEN Refer to the following sections in this guide for additional information on using the FLIR ONE. More detailed information is also available in the Help & Support feature within the FLIR app. The FLIR ONE Reference Manual is available from the FLIR web site: WARNING The FLIR ONE is not waterproof. Use caution if the FLIR ONE is used to observe very hot objects like fire or molten metal. USER GUIDE 3 FLIR ONE USER GUIDE The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Settings Menu. Charge Indicator LED Lightning USB Power Thermal Camera Visible Camera Phone Connect or Lightning or Micro USB Off/On Switch and Power Indicator CHARGING THE FLIR ONE Plug the Lightning USB end of the power cable into the FLIR ONE and plug the other end into a 1A power source. The Charge Indicator LED will blink while the device is charging. The FLIR ONE requires less than one hour for a full charge with a 1A source . When the device is fully charged, the Charge Indicator LED will be on continuously. USER GUIDE 4 FLIR ONE APP The latest version of the FLIR ONE app is available on the Apple App Store. Download and install the app, then start it. If the FLIR ONE is turned off, the app will prompt you to attach your FLR ONE camera and turn it on. The iPhone iOS version must be or higher. APP OVERVIEW At the top of the screen there is a black bar with icons for the Control Panel, Spot Meter, and Calibration. Below that is the live image, and at the bottom of the screen is another black bar with icons for the FLIR Library, Camera, and Color Palette. At the top of the bar is an indication of the Mode Video, Photo, Pano, or Time Lapse . APP OVERVIEW TAKING VIDEO At the top of the bottom bar, swipe right or left to select Video mode. Then tap on the red button to begin video capture. Tap on the red button again to stop the video capture and save the video in the FLIR Library. To view the captured video, tap the thumbnail image in the lower left of the screen to access the FLIR Library. PANORAMA MODE At the top of the bottom bar, swipe right or left to select Panorama mode. Then tap on the blue button to begin the panorama capture. Move the camera horizontally to the right as indicated by the arrow on the screen. Tap on the blue button again to stop the panorama capture. PANORAMA MODE USER GUIDE 5 TIME-LAPSE VIDEO At the top of the bottom bar, swipe right or left to select Time-Lapse mode. Then tap on the red button to display the Time-Lapse options. Adjust the options as needed, and then tap the red button to begin video capture. Tap on the red button again to stop the video capture. FLIR LIBRARY SCREEN Edit Image CHANGING COLOR PALETTES On the display the live image , tap the color palette icon in the lower right to change how the image is displayed. Select one of the displayed color palettes. The color palettes are described in more detail in the Help and Support feature of the app see Settings Menu . The app allows a choice from nine different palettes. Some include color, grayscale, or a combination of both. Share Image Info

PDF Datasheet Preview

USER GUIDE

Second Generation

For Apple iOS

FLIR ONE QUICK START

STEP 1 Charge the FLIR ONETM with the included USB power cable connected to a 1A power source. The Charge Indicator LED next to the USB connection blinks on and off while the FLIR ONE is charging and stays on continuously when it is fully charged. Once the FLIR ONE is charged, attached it to the phone.

Note iOS model The power cable for the iPhone with a Lightning connector will not work with the FLIR Ensure the FLIR ONE is fully charged before using it the first time. A charging cycle takes approximately one hour.

STEP 2 Download and install the FLIR app, which is available on the Apple App Store℠. When you start the FLIR ONE app, a short tutorial will be displayed to help you get started with the FLIR ONE.

STEP 3 Press the power button on the side of the FLIR ONE to turn it on. Initially, the indicator light will turn orange, and then it will flash green when the device is ready.

USER GUIDE 2

STEP 4 Once an image is displayed, tap the color palette icon in the lower right to change how the image is displayed. Select one of the displayed color or grayscale palettes.

APP OVERVIEW

The camera is in photo mode as indicated just below the image. Tap the round blue icon at the bottom of the screen to save a photo image. On the display, swipe left or right to select a different mode Video, Pano, or Time-Lapse . These modes are described in a later section of the manual.

The image that displays in the app is a combination of a thermal image and a daylight image through a unique process called MSX. The FLIR ONE thermal camera can produce an image even in total darkness. When visible light is available, the FLIR ONE daylight camera is used to enhance the detail of the FLIR ONE thermal camera.

For close up scenes, it is possible to optimize the way the daylight and thermal images are blended. Tap and hold the image to bring up a slider control at the bottom of the image. Moving the slider left or right changes the way the visible and thermal images are aligned. Optimizing the image is described in more detail on page

PALETTE SCREEN

Refer to the following sections in this guide for additional information on using the FLIR ONE.

More detailed information is also available in the Help & Support feature within the FLIR app. The FLIR ONE Reference Manual is available from the FLIR web site:

WARNING

The FLIR ONE is not waterproof.

Use caution if the FLIR ONE is
used to observe very hot objects
like fire or molten metal.

USER GUIDE 3

FLIR ONE USER GUIDE

The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Settings Menu.

Charge Indicator LED Lightning USB Power Thermal Camera Visible Camera Phone Connect or Lightning or Micro USB

Off/On Switch and Power Indicator

CHARGING THE FLIR ONE Plug the Lightning USB end of the power cable into the FLIR ONE and plug the other end into a 1A power source. The Charge Indicator LED will blink while the device is charging. The FLIR ONE requires less than one hour for a full charge with a 1A source . When the device is fully charged, the Charge Indicator LED will be on continuously.

USER GUIDE 4

FLIR ONE APP The latest version of the FLIR ONE app is available on the Apple App Store. Download and install the app, then start it. If the FLIR ONE is turned off, the app will prompt you to attach your FLR ONE camera and turn it on. The iPhone iOS version must be or higher.

APP OVERVIEW At the top of the screen there is a black bar with icons for the Control Panel, Spot Meter, and Calibration. Below that is the live image, and at the bottom of the screen is another black bar with icons for the FLIR Library, Camera, and Color Palette. At the top of the bar is an indication of the Mode Video, Photo, Pano, or Time Lapse .

APP OVERVIEW

TAKING VIDEO At the top of the bottom bar, swipe right or left to select Video mode. Then tap on the red button to begin video capture. Tap on the red button again to stop the video capture and save the video in the FLIR Library. To view the captured video, tap the thumbnail image in the lower left of the screen to access the FLIR Library.

PANORAMA MODE At the top of the bottom bar, swipe right or left to select Panorama mode. Then tap on the blue button to begin the panorama capture. Move the camera horizontally to the right as indicated by the arrow on the screen. Tap on the blue button again to stop the panorama capture.

PANORAMA MODE

USER GUIDE 5

TIME-LAPSE VIDEO At the top of the bottom bar, swipe right or left to select Time-Lapse mode. Then tap on the red button to display the Time-Lapse options. Adjust the options as needed, and then tap the red button to begin video capture. Tap on the red button again to stop the video capture.

FLIR LIBRARY SCREEN

Edit Image

CHANGING COLOR PALETTES On the display the live image , tap the color palette icon in the lower right to change how the image is displayed. Select one of the displayed color palettes. The color palettes are described in more detail in the Help and Support feature of the app see Settings Menu . The app allows a choice from nine different palettes. Some include color, grayscale, or a combination of both.

Share Image Info

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLIRONE-IOS Datasheet file may be downloaded here without warranties.

Datasheet ID: FLIRONE-IOS 635324