843206AGILF

843206AGILF Datasheet

ICS843206I

Part	Datasheet
843206AGILF	843206AGILF (pdf)

Related Parts	Information
843206AGILFT	843206AGILFT

PDF Datasheet Preview
FEMTOCLOCKS CRYSTAL-TO3.3V LVPECL FREQUENCY SYNTHESIZER ICS843206I The ICS843206I is a 6 output LVPECL Synthesizer optimized to generate Gigabit Ethernet and SONET HiPerClockS reference clock frequencies and is a member of the HiPerClocksTM family of high performance clock solutions from IDT. Using a 19.44MHz and 25MHz, 18pF parallel resonant crystal, 155.52MHz and 156.25MHz frequencies can be generated. The ICS843206I uses IDT’s FemtoClockTM low phase noise VCO technology and can achieve 1ps or lower typical RMS phase jitter. The ICS843206I is pack- aged in a 48-pin TSSOP package. • Six 3.3V differential LVPECL output pairs • Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input • Supports the following output frequencies 155.52MHz and 156.25MHz • VCO range 560MHz - 680MHz • RMS phase jitter 155.52MHz, using a 19.44MHz crystal 12kHz 1.3MHz 1.08ps typical • RMS phase jitter 156.25MHz, using a 25MHz crystal 1.875MHz 20MHz 0.5ps typical • Full 3.3V supply mode • -40°C to 85°C ambient operating temperature BLOCK DIAGRAM • Available in both standard RoHS 5 and lead-free RoHS 6 packages OEA Pullup QA0 nQA0 PIN ASSIGNMENT nPLL_BYPASS_AB Pullup REF_CLKAB Pulldown 25MHz XTAL_IN0 625MHz 156.25MHz XTAL_OUT0 REF_SELAB Pullup REF_CLKC Pulldown 19.44MHz XTAL_IN1 XTAL_OUT1 REF_SELC Pullup nPLL_BYPASS_C Pullup 622.08MHz 155.52MHz nQA1 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 843206AGI 48 Lead TSSOP tube -40°C to 85°C 843206AGIT 48 Lead TSSOP 1000 tape & reel -40°C to 85°C 843206AGILF ICS843206AGILF 48 Lead "Lead-Free" TSSOP tube -40°C to 85°C 843206AGILFT ICS843206AGILF 48 Lead "Lead-Free" TSSOP 1000 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER ICS843206I FEMTOCLOCKS CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 For Tech Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

FEMTOCLOCKS CRYSTAL-TO3.3V LVPECL FREQUENCY SYNTHESIZER

ICS843206I

The ICS843206I is a 6 output LVPECL Synthesizer
optimized to generate Gigabit Ethernet and SONET

HiPerClockS reference clock frequencies and is a member of the

HiPerClocksTM family of high performance clock
solutions from IDT. Using a 19.44MHz and 25MHz,
18pF parallel resonant crystal, 155.52MHz and 156.25MHz
frequencies can be generated. The ICS843206I uses IDT’s

FemtoClockTM low phase noise VCO technology and can achieve
1ps or lower typical RMS phase jitter. The ICS843206I is pack-
aged in a 48-pin TSSOP package.
• Six 3.3V differential LVPECL output pairs
• Selectable crystal oscillator interface or LVCMOS/LVTTL single-ended input
• Supports the following output frequencies 155.52MHz and 156.25MHz
• VCO range 560MHz - 680MHz
• RMS phase jitter 155.52MHz, using a 19.44MHz crystal 12kHz 1.3MHz 1.08ps typical
• RMS phase jitter 156.25MHz, using a 25MHz crystal 1.875MHz 20MHz 0.5ps typical
• Full 3.3V supply mode
• -40°C to 85°C ambient operating temperature

BLOCK DIAGRAM
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

OEA Pullup QA0
nQA0

PIN ASSIGNMENT
nPLL_BYPASS_AB Pullup

REF_CLKAB Pulldown
25MHz

XTAL_IN0
625MHz
156.25MHz

XTAL_OUT0

REF_SELAB Pullup

REF_CLKC Pulldown
19.44MHz

XTAL_IN1

XTAL_OUT1

REF_SELC Pullup nPLL_BYPASS_C Pullup
622.08MHz
155.52MHz
nQA1
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature
843206AGI
48 Lead TSSOP
tube
-40°C to 85°C
843206AGIT
48 Lead TSSOP
1000 tape & reel
-40°C to 85°C
843206AGILF

ICS843206AGILF
48 Lead "Lead-Free" TSSOP
tube
-40°C to 85°C
843206AGILFT

ICS843206AGILF
48 Lead "Lead-Free" TSSOP
1000 tape & reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER

ICS843206I FEMTOCLOCKS CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

For Tech Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 843206AGILF Datasheet file may be downloaded here without warranties.

Datasheet ID: 843206AGILF 637113