ICS8432BK-51LFT

ICS8432BK-51LFT Datasheet

ICS8432-51

Part	Datasheet
ICS8432BK-51LFT	ICS8432BK-51LFT (pdf)

Related Parts	Information
ICS8432BY-51LF	ICS8432BY-51LF
ICS8432BK-51LF	ICS8432BK-51LF
ICS8432BY-51	ICS8432BY-51
ICS8432BY-51LFT	ICS8432BY-51LFT

PDF Datasheet Preview
700MHZ, CYRSTAL-TO-3.3V DIFFERENTIAL LVPECL FREQUENCY SYNTHESIZER ICS8432-51 The ICS8432-51 is a general purpose, dual output Crystal-to-3.3V Differential LVPECL High Fre- HiPerClockS q u e n c y S y n t h e s i ze r a n d a m e m b e r o f t h e HiPerClockS family of High Performance Clock Solutions from IDT. The ICS8432-51 has a select- able REF_CLK or crystal input. The VCO operates at a fre- quency range of 250MHz to 700MHz. The VCO frequency is programmed in steps equal to the value of the input reference or crystal frequency. The VCO and output frequency can be programmed using the serial or parallel interface to the con- figuration logic. The low phase noise characteristics of the ICS8432-51 make it an ideal clock source for Gigabit Ethernet, Fibre Channel 1 and 2, and Infiniband applications. • Dual differential 3.3V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS/LVTTL REF_CLK • Output frequency range 31.25MHz to 700MHz • Crystal input frequency range 12MHz to 25MHz • VCO range 250MHz to 700MHz • Parallel or serial interface for programming counter and output dividers • RMS period jitter 3.5ps maximum • Cycle-to-cycle jitter 25ps maximum • 3.3V supply voltage • 0°C to 70°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages • Replaces the ICS8432-01 BLOCK DIAGRAM PIN ASSIGNMENT XTAL_IN nP_LOAD VCO_SEL M0 M1 M2 M3 M4 VCO_SEL XTAL_SEL REF_CLK XTAL1 XTAL2 S_LOAD S_DATA S_CLOCK nP_LOAD M0:M8 N0:N1 PLL PHASE DETECTOR CONFIGURATION INTERFACE LOGIC IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER FOUT0 nFOUT0 FOUT1 nFOUT1 TEST 32 31 30 29 28 27 26 25 M5 1 M6 2 M7 3 M8 4 N0 5 N1 6 nc 7 VEE 8 ICS8432-51 24 XTAL_OUT 23 REF_CLK 22 XTAL_SEL 21 VCCA 20 S_LOAD 19 S_DATA 18 S_CLOCK 17 MR TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS8432BY-51 ICS8432BY-51 32 Lead LQFP tray 0°C to 70°C ICS8432BY-51T ICS8432BY-51 32 Lead LQFP 1000 tape & reel 0°C to 70°C ICS8432BY-51LF ICS8432BY51L 32 Lead "Lead-Free" LQFP tray 0°C to 70°C ICS8432BY-51LFT ICS8432BY51L 32 Lead "Lead-Free" LQFP 1000 tape & reel 0°C to 70°C ICS8432BK-51 ICS8432BK51 32 Lead VFQFN tray 0°C to 70°C ICS8432BK-51T ICS8432BK51 32 Lead VFQFN 2500 tape & reel 0°C to 70°C ICS8432BK-51LF ICS8432B51L 32 Lead VFQFN tray 0°C to 70°C ICS8432BK-51LFT ICS8432B51L 11 Crystal section, corrected pin 24 to read XTAL2 and pin 25 to read XTAL1. 1 Features Section - added Lead-Free bullet. 16 Ordering Information - added Lead-Free part number. 1 Added 32 Lead VFQFN Package for Pin Assignment. Power Supply DC Characteristics Table - changed VCCA min. from 3.135V to VCC - 0.15V. 6 Crystal Characteristics Table - added Drive Level. 9 Added LVCMOS to XTAL Interface. 10 Added Recommendations for Unused Input and Output Pins. Added VFQFN package throughout the datasheet. 1 Changed naming convention of TEST_CLK to REF_CLK, pin 24 XTAL2 to XTAL_OUT, and pin 25 XTAL1 to XTAL_IN. Changed throughout the datasheet. T4C E LVPECL DC Characteristics Table - corrected VOH max. from VCCO - 1.0V to VCCO - 0.9V. 13 - 14 Power Considerations - corrected power dissipation to reflect VOH max in Table 4C. 18 Ordering Information Table - corrected ICS8432BK-51 marking to ICS8432BK51. Added VFQFN marking. 1 Pin Assignment - corrected typo on pin 25 from XTAL_OUT to XTAL_IN. F 11 Added VFQFN EPAD Thermal Release Path section. Date 12/18/02 2/13/03 3/12/03 5/9/03 5/28/03 4/8/05 4/13/06 4/10/07 5/13/08 IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER ICS8432-51 700MHZ, CRYSTAL-TO-3.3V DIFFERENTIAL LVPECL FREQUENCY SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 For Tech Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

700MHZ, CYRSTAL-TO-3.3V DIFFERENTIAL LVPECL FREQUENCY SYNTHESIZER

ICS8432-51

The ICS8432-51 is a general purpose, dual output

Crystal-to-3.3V Differential LVPECL High Fre-

HiPerClockS q u e n c y S y n t h e s i ze r a n d a m e m b e r o f t h e

HiPerClockS family of High Performance Clock

Solutions from IDT. The ICS8432-51 has a select-
able REF_CLK or crystal input. The VCO operates at a fre-
quency range of 250MHz to 700MHz. The VCO frequency is
programmed in steps equal to the value of the input reference
or crystal frequency. The VCO and output frequency can be
programmed using the serial or parallel interface to the con-
figuration logic. The low phase noise characteristics of the

ICS8432-51 make it an ideal clock source for Gigabit Ethernet,

Fibre Channel 1 and 2, and Infiniband applications.
• Dual differential 3.3V LVPECL outputs
• Selectable crystal oscillator interface or

LVCMOS/LVTTL REF_CLK
• Output frequency range 31.25MHz to 700MHz
• Crystal input frequency range 12MHz to 25MHz
• VCO range 250MHz to 700MHz
• Parallel or serial interface for programming counter and
output dividers
• RMS period jitter 3.5ps maximum
• Cycle-to-cycle jitter 25ps maximum
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages
• Replaces the ICS8432-01

BLOCK DIAGRAM

PIN ASSIGNMENT

XTAL_IN nP_LOAD VCO_SEL

M0 M1 M2 M3 M4

VCO_SEL XTAL_SEL REF_CLK

XTAL1

XTAL2

S_LOAD S_DATA S_CLOCK nP_LOAD

M0:M8 N0:N1

PLL PHASE DETECTOR

CONFIGURATION INTERFACE LOGIC

IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER

FOUT0 nFOUT0 FOUT1 nFOUT1 TEST
32 31 30 29 28 27 26 25

M5 1 M6 2 M7 3 M8 4 N0 5 N1 6 nc 7 VEE 8

ICS8432-51
24 XTAL_OUT 23 REF_CLK 22 XTAL_SEL 21 VCCA 20 S_LOAD 19 S_DATA 18 S_CLOCK 17 MR
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS8432BY-51

ICS8432BY-51
32 Lead LQFP
tray
0°C to 70°C

ICS8432BY-51T

ICS8432BY-51
32 Lead LQFP
1000 tape & reel
0°C to 70°C

ICS8432BY-51LF

ICS8432BY51L
32 Lead "Lead-Free" LQFP
tray
0°C to 70°C

ICS8432BY-51LFT

ICS8432BY51L
32 Lead "Lead-Free" LQFP 1000 tape & reel
0°C to 70°C

ICS8432BK-51

ICS8432BK51
32 Lead VFQFN
tray
0°C to 70°C

ICS8432BK-51T

ICS8432BK51
32 Lead VFQFN
2500 tape & reel
0°C to 70°C

ICS8432BK-51LF

ICS8432B51L
32 Lead VFQFN
tray
0°C to 70°C

ICS8432BK-51LFT

ICS8432B51L
11 Crystal section, corrected pin 24 to read XTAL2 and pin 25 to read XTAL1. 1 Features Section - added Lead-Free bullet. 16 Ordering Information - added Lead-Free part number.
1 Added 32 Lead VFQFN Package for Pin Assignment.

Power Supply DC Characteristics Table - changed VCCA min. from 3.135V to VCC - 0.15V.
6 Crystal Characteristics Table - added Drive Level.
9 Added LVCMOS to XTAL Interface.
10 Added Recommendations for Unused Input and Output Pins.

Added VFQFN package throughout the datasheet.
1 Changed naming convention of TEST_CLK to REF_CLK, pin 24 XTAL2 to XTAL_OUT,
and pin 25 XTAL1 to XTAL_IN. Changed throughout the datasheet.

T4C E

LVPECL DC Characteristics Table - corrected VOH max. from VCCO - 1.0V to VCCO - 0.9V.
13 - 14 Power Considerations - corrected power dissipation to reflect VOH max in Table 4C.
18 Ordering Information Table - corrected ICS8432BK-51 marking to ICS8432BK51. Added

VFQFN marking.
1 Pin Assignment - corrected typo on pin 25 from XTAL_OUT to XTAL_IN. F
11 Added VFQFN EPAD Thermal Release Path section.

Date 12/18/02 2/13/03 3/12/03
5/9/03
5/28/03 4/8/05 4/13/06
4/10/07 5/13/08

IDT / ICS 3.3V LVPECL FREQUENCY SYNTHESIZER

ICS8432-51 700MHZ, CRYSTAL-TO-3.3V DIFFERENTIAL LVPECL FREQUENCY SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

For Tech Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS8432BK-51LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS8432BK-51LFT 637112