843101AGI-100LFT

843101AGI-100LFT Datasheet

ICS843101I-100

Part	Datasheet
843101AGI-100LFT	843101AGI-100LFT (pdf)

Related Parts	Information
843101AGI-100LF	843101AGI-100LF

PDF Datasheet Preview
FEMTOCLOCKS CRYSTAL-TO-LVPECL 100MHZ FREQUENCY MARGINING SYNTHESIZER ICS843101I-100 The ICS843101I-100 is a low phase-noise frequency margining synthesizer and is a member HiPerClockS of the HiPerClockS family of high performance clock solutions from IDT. In the default mode, the device nominally generates a 100MHz LVPECL output clock signal from a 24MHz crystal input. There is also a frequency margining mode available where the device can be programmed, using the serial interface, to vary the output frequency up or down from nominal in 2% steps. The ICS843101I-100 is provided in a 16-pin TSSOP. • 100MHz nominal LVPECL output • Selectable crystal oscillator interface designed for 24MHz, 18pF parallel resonant crystal or LVCMOS/LVTTL single-ended input • Output frequency can be varied ±10% from nominal in 2% steps • VCO range 540MHz - 680MHz • RMS phase jitter 100MHz, using a 24MHz crystal 1.875MHz - 20MHz 0.55ps typical • Output supply modes Core/Output 3.3V/3.3V 3.3V/2.5V 2.5V/2.5V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS-6 packages BLOCK DIAGRAM OE Pullup CLK Pulldown 24MHz XTAL_IN XTAL_OUT SEL Pulldown Phase Detector 540 - 680MHz S_CLOCK S_DATA S_LOAD MODE Pulldown Serial Control PIN ASSIGNMENT VEE 1 16 MODE S_LOAD 2 15 VCCO S_DATA 3 14 Q S_CLOCK 4 13 nQ TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS843101AGI-100 101AI100 16 Lead TSSOP tube -40°C to 85°C ICS843101AGI100T 101AI100 16 Lead TSSOP 2500 tape & reel -40°C to 85°C ICS843101AGI-100LF 01AI100L 16 Lead "Lead-Free" TSSOP tube -40°C to 85°C ICS843101AGI-100LFT 01AI100L 16 Lead "Lead-Free" TSSOP 2500 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS complaint. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LVPECL FREQUENCY MARGINING SYNTHESIZER ICS843101I-100 FEMTOCLOCKS CRYSTAL-TO-LVPECL 100MHZ FREQUENCY MARGINING SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

FEMTOCLOCKS CRYSTAL-TO-LVPECL 100MHZ FREQUENCY MARGINING SYNTHESIZER

ICS843101I-100

The ICS843101I-100 is a low phase-noise
frequency margining synthesizer and is a member

HiPerClockS
of the HiPerClockS family of high performance clock
solutions from IDT. In the default mode, the device
nominally generates a 100MHz LVPECL output clock
signal from a 24MHz crystal input. There is also a frequency
margining mode available where the device can be programmed,
using the serial interface, to vary the output frequency up or down
from nominal in 2% steps. The ICS843101I-100 is provided in a
16-pin TSSOP.
• 100MHz nominal LVPECL output
• Selectable crystal oscillator interface designed for 24MHz, 18pF parallel resonant crystal or LVCMOS/LVTTL single-ended input
• Output frequency can be varied ±10% from nominal in 2% steps
• VCO range 540MHz - 680MHz
• RMS phase jitter 100MHz, using a 24MHz crystal 1.875MHz - 20MHz 0.55ps typical
• Output supply modes Core/Output 3.3V/3.3V 3.3V/2.5V 2.5V/2.5V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS-6 packages

BLOCK DIAGRAM

OE Pullup

CLK Pulldown
24MHz

XTAL_IN

XTAL_OUT

SEL Pulldown

Phase

Detector
540 - 680MHz

S_CLOCK S_DATA S_LOAD MODE

Pulldown

Serial Control

PIN ASSIGNMENT

VEE 1
16 MODE

S_LOAD 2
15 VCCO

S_DATA 3 14 Q

S_CLOCK 4 13 nQ
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS843101AGI-100
101AI100
16 Lead TSSOP
tube
-40°C to 85°C

ICS843101AGI100T
101AI100
16 Lead TSSOP
2500 tape & reel -40°C to 85°C

ICS843101AGI-100LF
01AI100L
16 Lead "Lead-Free" TSSOP
tube
-40°C to 85°C

ICS843101AGI-100LFT
01AI100L
16 Lead "Lead-Free" TSSOP 2500 tape & reel -40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS complaint.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LVPECL FREQUENCY MARGINING SYNTHESIZER

ICS843101I-100 FEMTOCLOCKS CRYSTAL-TO-LVPECL 100MHZ FREQUENCY MARGINING SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 843101AGI-100LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: 843101AGI-100LFT 637107