83904AGI-02LFT

83904AGI-02LFT Datasheet

The ICS83904I-02 is a low skew, high perfor-

Part	Datasheet
83904AGI-02LFT	83904AGI-02LFT (pdf)

Related Parts	Information
83904AGI-02LF	83904AGI-02LF

PDF Datasheet Preview
LOW SKEW, 1-TO-4, CRYSTAL-TOLVCMOS/LVTTL FANOUT BUFFER The ICS83904I-02 is a low skew, high perfor- mance 1-to-4 Crystal Oscillator/Crystal-to-LVCMOS HiPerClockS Fanout Buffer and a member of the HiPerClockS family of High Performance Clock Solutions from IDT. The ICS83904I-02 has selectable single-ended clock or two crystal-oscillator inputs. There is an output enable to disable the outputs by placing them into a high-impedance state. Guaranteed output and part-to-part skew characteristics make the ICS83904I-02 ideal for those applications demanding well defined performance and repeatability. BLOCK DIAGRAM OE Pullup CLK_SEL0 Pulldown CLK_SEL1 Pulldown ICS83904I-02 • Four LVCMOS/LVTTL outputs, 19Ω typical output impedance VDD = VDDO = 3.3V • Two Crystal oscillator input pairs One LVCMOS/LVTTL clock input • Crystal input frequencry range 12MHz 38.88MHz • Output frequency 200MHz maximum • Output Skew 40ps maximum VDD = VDDO = 3.3V • RMS phase jitter 25MHz output, using a 25MHz crystal 100Hz 1MHz 0.16ps typical V = V = 3.3V • RMS phase noise at 25MHz: Offset Noise Power 100Hz dBc/Hz 1kHz dBc/Hz 10kHz dBc/Hz 100kHz dBc/Hz • Supply Voltage Modes Core/Output 3.3V/3.3V 3.3V/2.5V 3.3V/1.8V 2.5V/2.5V 2.5V/1.8V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages XTAL_IN0 XTAL_OUT0 XTAL_IN1 XTAL_OUT1 CLK Pulldown 10 11 PIN ASSIGNMENT CLK_SEL0 1 16 VDDO XTAL_OUT0 2 15 Q0 XTAL_IN0 3 14 Q1 VDD 4 13 GND XTAL_IN1 5 12 Q2 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS83904AGI-02 3904AI02 16 Lead TSSOP tube -40°C to 85°C ICS83904AGI-02T 3904AI02 16 Lead TSSOP 2500 tape & reel -40°C to 85°C ICS83904AGI-02LF 904AI02L 16 Lead "Lead-Free" TSSOP tube -40°C to 85°C ICS83904AGI-02LFT 904AI02L 16 Lead "Lead-Free" TSSOP 2500 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LVCMOS/LVTTL FANOUT BUFFER ICS83904I-02 LOW SKEW, 1-TO-4, CRYSTAL-TO-LVCMOS/LVTTL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851 2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, 1-TO-4, CRYSTAL-TOLVCMOS/LVTTL FANOUT BUFFER

The ICS83904I-02 is a low skew, high perfor-
mance 1-to-4 Crystal Oscillator/Crystal-to-LVCMOS

HiPerClockS Fanout Buffer and a member of the HiPerClockS
family of High Performance Clock Solutions from IDT.

The ICS83904I-02 has selectable single-ended clock
or two crystal-oscillator inputs. There is an output enable to
disable the outputs by placing them into a high-impedance state.

Guaranteed output and part-to-part skew characteristics make the ICS83904I-02 ideal for those applications demanding well defined performance and repeatability.

BLOCK DIAGRAM

OE Pullup CLK_SEL0 Pulldown CLK_SEL1 Pulldown

ICS83904I-02
• Four LVCMOS/LVTTL outputs, 19Ω typical output impedance VDD = VDDO = 3.3V
• Two Crystal oscillator input pairs One LVCMOS/LVTTL clock input
• Crystal input frequencry range 12MHz 38.88MHz
• Output frequency 200MHz maximum
• Output Skew 40ps maximum VDD = VDDO = 3.3V
• RMS phase jitter 25MHz output, using a 25MHz crystal
100Hz 1MHz 0.16ps typical V = V = 3.3V
• RMS phase noise at 25MHz:

Offset

Noise Power
100Hz dBc/Hz
1kHz dBc/Hz
10kHz dBc/Hz
100kHz dBc/Hz
• Supply Voltage Modes Core/Output 3.3V/3.3V 3.3V/2.5V 3.3V/1.8V 2.5V/2.5V 2.5V/1.8V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

XTAL_IN0 XTAL_OUT0

XTAL_IN1 XTAL_OUT1

CLK Pulldown
10 11

PIN ASSIGNMENT

CLK_SEL0 1
16 VDDO

XTAL_OUT0 2 15 Q0

XTAL_IN0 3 14 Q1

VDD 4
13 GND

XTAL_IN1 5 12 Q2
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS83904AGI-02
3904AI02
16 Lead TSSOP
tube
-40°C to 85°C

ICS83904AGI-02T
3904AI02
16 Lead TSSOP
2500 tape & reel
-40°C to 85°C

ICS83904AGI-02LF
904AI02L
16 Lead "Lead-Free" TSSOP
tube
-40°C to 85°C

ICS83904AGI-02LFT
904AI02L
16 Lead "Lead-Free" TSSOP 2500 tape & reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LVCMOS/LVTTL FANOUT BUFFER

ICS83904I-02 LOW SKEW, 1-TO-4, CRYSTAL-TO-LVCMOS/LVTTL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851
2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 83904AGI-02LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: 83904AGI-02LFT 637077