ICS275PGT

ICS275PGT Datasheet

ICS275

Part	Datasheet
ICS275PGT	ICS275PGT (pdf)

Related Parts	Information
ICS275PGI	ICS275PGI
ICS275PG	ICS275PG
ICS275PGIT	ICS275PGIT
275G-22LF	275G-22LF
275G-22LFT	275G-22LFT

PDF Datasheet Preview
DATASHEET TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER ICS275 The ICS275 field programmable VCXO clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals and crystal oscillators in most electronic systems. Using IDT’s VersaClockTM software to configure PLLs and outputs, the ICS275 contains a One-Time Programmable OTP ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of two low-skew outputs. Using Phase-Locked Loop PLL techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost. The ICS275 is also available in factory programmed custom versions for high-volume applications. • Packaged as 16-pin TSSOP • Eight addressable registers • Replaces multiple crystals and oscillators • Output frequencies up to 200 MHz at V • Input crystal frequency of 5 to 27 MHz • Up to four reference outputs • Up to two sets of two low-skew outputs • Operating voltages of V • Controllable output drive levels • Advanced, low-power CMOS process • Available in RoHS compliant packaging NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram S2:S0 3 OTP ROM with PLL Values X1 Crystal Voltage Controlled Crystal Oscillator External capacitors are required. VDD 3 PLL1 PLL2 PLL3 Divide Logic and Output Enable Control GND 2 PDTS CLK1 CLK2 CLK3 CLK4 IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER 1 ICS275 ICS275 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER Pin Assignment VIN 1 S0 2 S1 3 VDD 4 CLK1 5 CLK2 6 GND 7 X1 8 16 S2 15 VDD 14 PDTS 13 GND 12 CLK4 11 CLK3 10 VDD 9 X2 16 pin 173 mil TSSOP EPROM VCXO AND SYNTHESIZER Pin Descriptions Pin Number 2 3 4 5 6 7 8 9 10 11 12 13 15 16 Pin Name S0 S1 VDD CLK1 CLK2 GND X1 X2 VDD CLK3 CLK4 GND PDTS VDD S2 Pin Type Input Input Power Output Power XI XO Power Output Power Ordering Information Part / Order Number 275PG* 275PGI* 275PGLF 275PGILF 275G-XX* 275GI* 275GLF 275GILF 275GT* 275GIT* 275GLFT 275GILFT Marking See page 7 above 275G-XX 275GIXX 275GXXL 275GIXXL 275G-XX 275GIXX 275GXXL 275GIXXL Shipping Packaging Tubes Tape and Reel Tape and Reel Tape and Reel Tape and Reel Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP Temperature 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. The 275G-XX, 275G-XXLF, 275GI-XX, and 275GI-XXLF are factory programmed versions of the 275PG, 275PGLF, 275PGI, and 275PGLF. A unique “-XX” suffix is assigned by the factory for each custom configuration, and a separate data sheet is kept on file. For more information on custom part numbers programmed at the factory, please contact your local IDT sales and marketing representative. While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. VersaClockTM is a trademark of IDT, Inc. All rights reserved. IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER 9 ICS275 ICS275 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER EPROM VCXO AND SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

DATASHEET

TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER

ICS275

The ICS275 field programmable VCXO clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals and crystal oscillators in most electronic systems. Using IDT’s VersaClockTM software to configure PLLs and outputs, the ICS275 contains a One-Time Programmable OTP ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of two low-skew outputs.

Using Phase-Locked Loop PLL techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost.

The ICS275 is also available in factory programmed custom versions for high-volume applications.
• Packaged as 16-pin TSSOP
• Eight addressable registers
• Replaces multiple crystals and oscillators
• Output frequencies up to 200 MHz at V
• Input crystal frequency of 5 to 27 MHz
• Up to four reference outputs
• Up to two sets of two low-skew outputs
• Operating voltages of V
• Controllable output drive levels
• Advanced, low-power CMOS process
• Available in RoHS compliant packaging

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

S2:S0 3

OTP ROM with PLL Values

X1 Crystal

Voltage Controlled

Crystal Oscillator

External capacitors are required.

VDD 3

PLL1 PLL2 PLL3

Divide Logic and Output Enable Control

GND 2

PDTS

CLK1 CLK2 CLK3 CLK4

IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER 1

ICS275

ICS275 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER

Pin Assignment

VIN 1 S0 2 S1 3 VDD 4 CLK1 5 CLK2 6 GND 7 X1 8
16 S2 15 VDD 14 PDTS 13 GND 12 CLK4 11 CLK3 10 VDD 9 X2
16 pin 173 mil TSSOP

EPROM VCXO AND SYNTHESIZER

Pin Descriptions

Pin Number
2 3 4 5 6 7 8 9 10 11 12 13
15 16

Pin Name

S0 S1 VDD CLK1 CLK2 GND X1 X2 VDD CLK3 CLK4 GND

PDTS

VDD S2

Pin Type

Input

Input Power Output Power

XI XO Power Output Power
Ordering Information

Part / Order Number
275PG* 275PGI* 275PGLF 275PGILF 275G-XX* 275GI* 275GLF 275GILF 275GT* 275GIT* 275GLFT 275GILFT

Marking

See page 7 above
275G-XX 275GIXX 275GXXL 275GIXXL 275G-XX 275GIXX 275GXXL 275GIXXL

Shipping Packaging

Tubes Tape and Reel Tape and Reel Tape and Reel Tape and Reel

Package
16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP

Temperature
0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

The 275G-XX, 275G-XXLF, 275GI-XX, and 275GI-XXLF are factory programmed versions of the 275PG, 275PGLF, 275PGI, and 275PGLF. A unique “-XX” suffix is assigned by the factory for each custom configuration, and a separate data sheet is kept on file. For more information on custom part numbers programmed at the factory, please contact your local IDT sales and marketing representative.

While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. VersaClockTM is a trademark of IDT, Inc. All rights reserved.

IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER 9

ICS275

ICS275 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER

EPROM VCXO AND SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS275PGT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS275PGT 636969