ICS601M-02I

ICS601M-02I Datasheet

ICS601-02

Part	Datasheet
ICS601M-02I	ICS601M-02I (pdf)

Related Parts	Information
ICS601M-02IT	ICS601M-02IT

PDF Datasheet Preview
LOW PHASE NOISE CLOCK MULTIPLIER DATASHEET ICS601-02 The ICS601-02 is a low cost, low phase noise, high performance clock synthesizer for any application that requires low phase noise and low jitter. The ICS601 is IDT’s lowest phase noise multiplier. Using IDT’s patented analog and digital Phase Locked Loop PLL techniques, the chip accepts a MHz crystal or clock input, and produces output clocks up to 170 MHz at V. A separate supply pin is provided so that the output can be V. This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output timing, use the ICS670-01. • Packaged in 16-pin SOIC Pb free • Uses fundamental 10 - 27 MHz crystal or clock • Patented PLL with the lowest phase noise • Output clocks up to 170 MHz at V • Output Enable function tri-states outptus • Low phase noise -132 dBc/Hz at 10 kHz • Low jitter - 18 ps one sigma • Full swing CMOS outputs with 25 mA drive capability at TTL levels • Advanced, low power, sub-micron CMOS process • Industrial temperature range -40 to +85°C • V or 5 V core VDD. Output clock can operate down to Block Diagram VDDP Reference Divider Phase Comparator Charge Pump Loop Filter X1/ICLK Crystal or clock input Optional crystal capacitors needed for accurate tuning not shown Crystal Oscillator ROM Based Multipliers VCO Divide S3:0 IDT LOW PHASE NOISE CLOCK MULTIPLIER ICS601-02 ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER SYNTHESIZERS Pin Assignment Multiplier Select Table CLK VDDP X2 S1 X1/ICLK 16-pin SOIC GND OE S0 S3 S2 Pin Descriptions S3 S2 S1 S0 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 Input x4/3 Input x4 Input x25/4 Input x3 Input x7.5 Input x5 Input x6 Input x8 Input x8/3 Input x8 Input x12.5 Input x6 Input x15 Input x10 Input x12 Input x16 0 = connect directly to ground 1 = connect directly to VDD Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Name CLK VDDP VDD X2 S1 X1/ICLK S2 S3 S0 OE GND Ordering Information Part / Order Number ICS601M-02I ICS601M-02IT ICS601M-02ILF ICS601M-02ILFT Marking ICS601M-02I ICS601M-02I 601M-02ILF 601M-02ILF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC Temperature -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT LOW PHASE NOISE CLOCK MULTIPLIER ICS601-02 ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER 02/10/09 Converted to IDT document template. SYNTHESIZERS IDT LOW PHASE NOISE CLOCK MULTIPLIER ICS601-02 ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER SYNTHESIZERS Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW PHASE NOISE CLOCK MULTIPLIER

DATASHEET

ICS601-02

The ICS601-02 is a low cost, low phase noise, high performance clock synthesizer for any application that requires low phase noise and low jitter. The ICS601 is IDT’s lowest phase noise multiplier. Using IDT’s patented analog and digital Phase Locked Loop PLL techniques, the chip accepts a MHz crystal or clock input, and produces output clocks up to 170 MHz at V. A separate supply pin is provided so that the output can be V.

This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output timing, use the ICS670-01.
• Packaged in 16-pin SOIC Pb free
• Uses fundamental 10 - 27 MHz crystal or clock
• Patented PLL with the lowest phase noise
• Output clocks up to 170 MHz at V
• Output Enable function tri-states outptus
• Low phase noise -132 dBc/Hz at 10 kHz
• Low jitter - 18 ps one sigma
• Full swing CMOS outputs with 25 mA drive capability at

TTL levels
• Advanced, low power, sub-micron CMOS process
• Industrial temperature range -40 to +85°C
• V or 5 V core VDD. Output clock can operate down to

Block Diagram

VDDP

Reference Divider

Phase Comparator

Charge Pump

Loop Filter

X1/ICLK

Crystal or clock input

Optional crystal capacitors needed for accurate tuning
not shown

Crystal Oscillator

ROM Based Multipliers

VCO Divide

S3:0

IDT LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-02

ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER

SYNTHESIZERS

Pin Assignment

Multiplier Select Table

CLK VDDP

X2 S1 X1/ICLK
16-pin SOIC

GND OE S0 S3 S2

Pin Descriptions

S3 S2 S1 S0
0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111

Input x4/3 Input x4 Input x25/4 Input x3 Input x7.5 Input x5 Input x6 Input x8 Input x8/3 Input x8 Input x12.5 Input x6 Input x15 Input x10 Input x12 Input x16
0 = connect directly to ground 1 = connect directly to VDD

Pin Number
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pin Name CLK VDDP VDD

X2 S1 X1/ICLK S2 S3 S0 OE GND
Ordering Information

Part / Order Number

ICS601M-02I ICS601M-02IT ICS601M-02ILF ICS601M-02ILFT

Marking

ICS601M-02I ICS601M-02I 601M-02ILF 601M-02ILF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC

Temperature
-40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-02

ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER
02/10/09 Converted to IDT document template.

SYNTHESIZERS

IDT LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-02

ICS601-02 LOW PHASE NOISE CLOCK MULTIPLIER

SYNTHESIZERS

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS601M-02I Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS601M-02I 637026