ICS542MIT

ICS542MIT Datasheet

ICS542

Part	Datasheet
ICS542MIT	ICS542MIT (pdf)

Related Parts	Information
ICS542MT	ICS542MT
ICS542MI	ICS542MI
ICS542M	ICS542M

PDF Datasheet Preview
CLOCK DIVIDER DATASHEET ICS542 The ICS542 is cost effective way to produce a high-quality clock output divided from a clock input. The chip accepts a clock input up to 156 MHz at V and produces a divide by 2, 4, 6, 8, 12, or 16 of the input clock. There are two outputs on the chip, one being a low-skew divide by two of the other. For instance, if an 100 MHz input clock is used, the ICS542 can produce low-skew 50 MHz and 25 MHz clocks, or low skew 25 MHz and MHz clocks. The chip has an all-chip power-down mode that stops the outputs low, and an OE pin that tri-states the outputs. See the ICS541 and ICS543 for other clock dividers, and the ICS501, 502, 511, 512, and 525 for clock multipliers. • 8-pin SOIC package • Available in RoHS compliant package • IDT’s lowest cost clock divider • Low skew 500 ps outputs. One is /2 of the other • Easy to use with other generators and buffers • Input clock frequency up to 156 MHz • Output clock duty cycle of 45/55 • Power-down turns off chip • Output Enable • Advanced, low-power CMOS process • Operating voltage of V or 5 V • Does not degrade phase noise - no PLL • Available in industrial and commercial temperature ranges NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram S1, S0 Input Clock Divider Selection Circuitry CLK1 CLK2 OE both outputs IDT / ICS CLOCK DIVIDER ICS542 ICS542 CLOCK DIVIDER Pin Assignment ICLK 1 VDD 2 GND 3 8 CLK 7 CLK/2 6 OE 5 S1 8-pin 150 mil SOIC CLOCK DIVIDER Clock Decoding Table S1 S0 CLK/2 Power Down All Input/6 Input/12 Input/8 Input/16 Input/2 Input/4 0 = connect directly to ground 1 = connect directly to VDD Pin Descriptions Pin Number 1 2 3 4 Pin Name ICLK VDD GND OE CLK/2 CLK Ordering Information A1 -C- SEATING PLANE Part / Order Number 542M* 542MT* 542MLF 542MLFT 542MI* 542MIT* 542MILF 542MILFT Marking ICS542M 542MLF ICS542MI 542MILF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS CLOCK DIVIDER ICS542 ICS542 CLOCK DIVIDER CLOCK DIVIDER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

CLOCK DIVIDER

DATASHEET

ICS542

The ICS542 is cost effective way to produce a high-quality clock output divided from a clock input. The chip accepts a clock input up to 156 MHz at V and produces a divide by 2, 4, 6, 8, 12, or 16 of the input clock. There are two outputs on the chip, one being a low-skew divide by two of the other.

For instance, if an 100 MHz input clock is used, the ICS542 can produce low-skew 50 MHz and 25 MHz clocks, or low skew 25 MHz and MHz clocks. The chip has an all-chip power-down mode that stops the outputs low, and an OE pin that tri-states the outputs.

See the ICS541 and ICS543 for other clock dividers, and the ICS501, 502, 511, 512, and 525 for clock multipliers.
• 8-pin SOIC package
• Available in RoHS compliant package
• IDT’s lowest cost clock divider
• Low skew 500 ps outputs. One is /2 of the other
• Easy to use with other generators and buffers
• Input clock frequency up to 156 MHz
• Output clock duty cycle of 45/55
• Power-down turns off chip
• Output Enable
• Advanced, low-power CMOS process
• Operating voltage of V or 5 V
• Does not degrade phase noise - no PLL
• Available in industrial and commercial temperature
ranges

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

S1, S0 Input Clock

Divider

Selection

Circuitry

CLK1 CLK2

OE both outputs

IDT / ICS CLOCK DIVIDER

ICS542

ICS542 CLOCK DIVIDER

Pin Assignment

ICLK 1 VDD 2 GND 3
8 CLK 7 CLK/2 6 OE 5 S1
8-pin 150 mil SOIC

CLOCK DIVIDER

Clock Decoding Table

S1 S0

CLK/2

Power Down All

Input/6

Input/12

Input/8

Input/16

Input/2

Input/4
0 = connect directly to ground
1 = connect directly to VDD

Pin Descriptions

Pin Number
1 2 3 4

Pin Name ICLK VDD GND

OE CLK/2 CLK
Ordering Information

A1 -C-

SEATING PLANE

Part / Order Number
542M* 542MT* 542MLF 542MLFT 542MI* 542MIT* 542MILF 542MILFT

Marking

ICS542M 542MLF ICS542MI 542MILF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS CLOCK DIVIDER

ICS542

ICS542 CLOCK DIVIDER

CLOCK DIVIDER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS542MIT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS542MIT 637003