ICS2304NZGI-1

ICS2304NZGI-1 Datasheet

ICS2304NZ-1

Part	Datasheet
ICS2304NZGI-1	ICS2304NZGI-1 (pdf)

Related Parts	Information
ICS2304NZGI-1T	ICS2304NZGI-1T
ICS2304NZG-1T	ICS2304NZG-1T
ICS2304NZG-1	ICS2304NZG-1

PDF Datasheet Preview
LOW SKEW PCI/PCI-X BUFFER DATASHEET ICS2304NZ-1 The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating at speeds from 0 to 140 MHz. The ICS2304NZ-1 is characterized for operation from -40°C to +85°C for automotive and industrial applications. • Packaged in 8-pin TSSOP mm body • Available in Pb lead free package • Frequency range of 0 to 140 MHz • Less than 100 ps skew between outputs • Distribute one clock input to one bank of four outputs • Operating voltage of V ±10% • Available in commercial and industrial temperature ranges NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram CLK_IN Logic Control CLK0 CLK1 CLK2 CLK3 IDT / ICS LOW SKEW PCI/PCI-X BUFFER ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Pin Assignment Functionality Table CLK_IN 1 OE 2 CLK0 3 GND 4 8 CLK3 7 CLK2 6 VDD 5 CLK1 Inputs CLK_IN Outputs CLK 3:0 Tristate 0 Tristate 1 Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 Pin Name CLK_IN OE CLK0 GND CLK1 VDD CLK2 CLK3 Pin Type Pin Description Input reference frequency. Input Output Enable. When OE is low, it tri-states clock outputs. Output Buffered clock output. Power Connect to ground. Output Buffered clock output. Power supply for V. Output Buffered clock output. Output Buffered clock output. Ordering Information Part / Order Number 2304NZG-1* 2304NZG-1T* 2304NZG-1LF 2304NZG-1LFT 2304NZGI-1* 2304NZGI-1T* 2304NZGI-1LF 2304NZGI-1LFT Marking see page 8 Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01. Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LOW SKEW PCI/PCI-X BUFFER ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW PCI/PCI-X BUFFER

DATASHEET

ICS2304NZ-1

The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating at speeds from 0 to 140 MHz.

The ICS2304NZ-1 is characterized for operation from -40°C to +85°C for automotive and industrial applications.
• Packaged in 8-pin TSSOP mm body
• Available in Pb lead free package
• Frequency range of 0 to 140 MHz
• Less than 100 ps skew between outputs
• Distribute one clock input to one bank of four outputs
• Operating voltage of V ±10%
• Available in commercial and industrial temperature
ranges

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

CLK_IN

Logic Control

CLK0 CLK1 CLK2 CLK3

IDT / ICS LOW SKEW PCI/PCI-X BUFFER

ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER

FAN OUT BUFFER

Pin Assignment

Functionality Table

CLK_IN 1 OE 2

CLK0 3 GND 4
8 CLK3 7 CLK2 6 VDD 5 CLK1

Inputs

CLK_IN

Outputs CLK 3:0

Tristate 0

Tristate 1

Pin Descriptions

Pin Number
1 2 3 4 5 6 7 8

Pin Name

CLK_IN OE

CLK0 GND CLK1 VDD CLK2 CLK3

Pin Type

Pin Description

Input reference frequency.

Input Output Enable. When OE is low, it tri-states clock outputs.

Output Buffered clock output.

Power Connect to ground.

Output Buffered clock output.

Power supply for V.

Output Buffered clock output.

Output Buffered clock output.
Ordering Information

Part / Order Number
2304NZG-1* 2304NZG-1T* 2304NZG-1LF 2304NZG-1LFT 2304NZGI-1* 2304NZGI-1T* 2304NZGI-1LF 2304NZGI-1LFT

Marking
see page 8

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01.

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LOW SKEW PCI/PCI-X BUFFER

ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER

FAN OUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS2304NZGI-1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS2304NZGI-1 636963