8413S06BKILFT

8413S06BKILFT Datasheet


8413S06

Part Datasheet
8413S06BKILFT 8413S06BKILFT 8413S06BKILFT (pdf)
Related Parts Information
8413S06BKILF 8413S06BKILF 8413S06BKILF
PDF Datasheet Preview
Clock Generator for Cavium Processors
8413S06

DATA SHEET

The 8413S06 is a PLL-based clock generator specifically designed for Cavium Networks Octeon II processors. This high performance device is optimized to generate the processor core reference clock,
• Six selectable 100MHz, 125MHz, 156.25MHz and 312.5MHz
clocks for sRIO, XAUI, SGMII and HCSL interface levels
• One 125MHz RGMII clock QG , LVCMOS/LVTTL interface levels
sRIO, XAUI, SGMII SerDes reference clocks and the clocks for both the Gigabit Ethernet MAC and PHY. The clock generator offers ultra low-jitter, low-skew clock outputs, and edge rates that easily meet the input requirements for the CN63XX and CN68XX series of processors. The output frequencies are generated from a 25MHz external input source or an external 25MHz parallel resonant crystal. The industrial temperature range of the 8413S06 supports telecommunication, networking, and storage requirements.
• One 50MHz processor core clock QF , LVCMOS/LVTTL
interface levels
• Two 25MHz QREF clocks, LVCMOS/LVTTL interface levels,
output impedance
• Selectable external crystal or differential single-ended input
source
• Crystal oscillator interface designed for 25MHz, parallel
resonant crystal
• Differential CLK, nCLK input pair that can accept LVPECL, LVDS,

LVHSTL, HCSL input levels
• Systems using Cavium Processors
• CPE Gateway Design
• Home Media Servers
• 802.11n AP or Gateway
• Internal resistor bias on nCLK pin allows the user to drive CLK
input with external single-ended LVCMOS/ LVTTL input levels
• Full 3.3V or mixed 3.3V core/2.5V output supply modes, RGMII
output and QREF outputs
• Full 3.3V output supply mode, HCSL and core clock outputs
• -40°C to 85°C ambient operating temperature
• Lead-free RoHS 6 packaging
• Soho Secure Gateway
• Soho SME Gateway

Pin Assignment

VDDO_QREF QREF1 QREF0 OE_REF OE_G QG VDDO_G QF VDDO_F nMR VDD IREF
• Wireless Soho and SME VPN Solutions
• Wired and Wireless Network Security
• Web Servers and Exchange Servers

GND FSEL_A0 FSEL_A1 FSEL_B0 FSEL_B1 FSEL_C0 FSEL_C1

VDDA XTAL_IN XTAL_OUT REF_SEL
48 47 46 45 44 43 42 41 40 39 38 37
8413S06
13 14 15 16 17 18 19 20 21 22 23 24

OE_C nQC1 QC1 nQC0 QC0 VDDO_C VDDO_B nQB1 QB1 nQB0 QB0 OE_B

VDD PLL_SEL

CLK nCLK OE_A VDDO_A

QA0 nQA0
Ordering Information
Table Ordering Information

Part/Order Number

Marking

Package

Shipping Packaging

Temperature
8413S06BKILF

ICS8413S06BIL
48 Lead VFQFN, Lead-Free

Tray
-40C to 85C
8413S06BKILFT

ICS8413S06BIL
48 Lead VFQFN, Lead-Free

Tape & Reel
-40C to 85C

NOTE Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

CLOCK GENERATOR FOR CAVIUM PROCESSORS
8413S06 DATA SHEET

Page 1 2 3

Description of Change

New pin assignment format - no changes to pins. Corrected block diagram. Pin Description Table - corrected pin 39 nMR description. Updated header/footer throughout the datasheet.

Corrected QG output in block diagram from differential output to single-ended output.

Date 2/03/15 3/06/15

CLOCK GENERATOR FOR CAVIUM PROCESSORS

Corporate Headquarters 6024 Silver Creek Valley Road San Jose, CA 95138 USA

Sales 1-800-345-7015 or 408-284-8200 Fax 408-284-2775

Tech Support email:

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright 2015 Integrated Device Technology, Inc.. All rights reserved.
More datasheets: DF62-7EP-2.2C | DF62-5S-2.2C | DF62-3EP-2.2C | DF62-6S-2.2C | DF62-4EP-2.2C | LAW005F | LAW005CL | LAW005B | LAW005A | 8413S06BKILF


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8413S06BKILFT Datasheet file may be downloaded here without warranties.

Datasheet ID: 8413S06BKILFT 636705