TLE4990HAXA1

TLE4990HAXA1 Datasheet

TLE4990-E6782

Part	Datasheet
TLE4990HAXA1	TLE4990HAXA1 (pdf)

Related Parts	Information
TLE4990E6782HAXA1	TLE4990E6782HAXA1

PDF Datasheet Preview
Data Sheet, V November 2005 TLE4990-E6782 Programmable Linear Output Hall Sensor Sensors Edition 2005-11 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany Infineon Technologies AG All Rights Reserved. Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of noninfringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. TLE4990 2004-11 Previous Version: 2004-05 Correction of typing error Horizontal position of Hall cell 2.67mm Correction of typing errors Width of package 5.34mm and width of tape 0.39mm Version wrong tolerance of tape width TLE4990 2005-01 Previous Version: 2004-11 Table 2 Correction of typing error VOUTov min = -0.3V instead of 0.3V TLE4990 2005-11 Previous Version: Removal of Version TLE4990-E6785 We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to: TLE4990 Programmable Linear Hall Sensor Table of Contents Overview 5 Features 5 Target Applications 5 Functional Description 6 Pin Configuration 6 General 7

PDF Datasheet Preview

Data Sheet, V November 2005

TLE4990-E6782

Programmable Linear Output Hall Sensor

Sensors

Edition 2005-11

Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of noninfringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

TLE4990
2004-11

Previous Version:
2004-05

Correction of typing error Horizontal position of Hall cell 2.67mm

Correction of typing errors Width of package 5.34mm
and width of tape 0.39mm

Version wrong tolerance of tape width

TLE4990
2005-01

Previous Version:
2004-11

Table 2 Correction of typing error VOUTov min = -0.3V instead of 0.3V

TLE4990
2005-11

Previous Version:

Removal of Version TLE4990-E6785

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to:

TLE4990 Programmable Linear Hall Sensor

Table of Contents

Overview 5

Features 5

Target Applications 5

Functional Description 6

Pin Configuration 6

General 7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TLE4990HAXA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: TLE4990HAXA1 638769