TLE4269GNTMA1

TLE4269GNTMA1 Datasheet

TLE 4269

Part	Datasheet
TLE4269GNTMA1	TLE4269GNTMA1 (pdf)

Related Parts	Information
TLE4269GLNTMA1	TLE4269GLNTMA1
TLE4269GMNTMA1	TLE4269GMNTMA1

PDF Datasheet Preview
5-V Low Drop Fixed Voltage Regulator TLE 4269 • Output voltage tolerance ±2% • 150 mA current capability • Very low current consumption • Early warning • Reset output low down to VQ = 1 V P-DSO-8-3, -6, -7, -8, -9 Functional Description P-DSO-14-3, -8, -9, -11, 14 This device an automotive suited voltage regulator with a fixed 5-V output. The maximum operating voltage is 45 V. The output is able to drive 150 mA load. It is short circuit protected and the thermal shutdown switches the output off if the junction temperature is in excess of 150 °C. A reset signal is generated for an output voltage of VQ < V. The reset threshold voltage can be decreased by external connection of a voltage divider. P/PG-DSO-20-1,-6,-7,-9,-14,- The reset delay time can be set by an external capacitor. Reset and sense output have integrated pull-up resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also possible to supervise the input voltage by using an integrated comparator to give a low voltage warning. Type TLE 4269 G TLE 4269 GM TLE 4269 GL Package PG-DSO-8-16 PG-DSO-14-30 PG-DSO-20-35 Data Sheet TLE 4269 PG-DSO-8-16 Ι1 SΙ 2 RADJ 3 D4 8Q 7 SO 6 RO 5 GND AEP01668 Figure 1 Pin Configuration top view Table 1 Pin No. 1 2 3 4 5 6 Pin Definitions and Functions TLE 4269 G Symbol Function Input block to GND directly at the IC with a ceramic capacitor. Sense Input if not needed connect to Q. RADJ Reset Threshold Adjust if not needed connect to GND. Reset Delay to select delay time, connect to GND via capacitor. Ground Reset Output the open-collector output is internally linked to Q via a 20 pull-up resistor. Keep open, if not needed. Sense Output the open-collector output is internally linked to

PDF Datasheet Preview

5-V Low Drop Fixed Voltage Regulator

TLE 4269
• Output voltage tolerance ±2%
• 150 mA current capability
• Very low current consumption
• Early warning
• Reset output low down to VQ = 1 V

P-DSO-8-3, -6, -7, -8, -9

Functional Description

P-DSO-14-3, -8, -9, -11, 14

This device an automotive suited voltage regulator with a
fixed 5-V output. The maximum operating voltage is
45 V. The output is able to drive 150 mA load. It is short
circuit protected and the thermal shutdown switches the
output off if the junction temperature is in excess of
150 °C. A reset signal is generated for an output voltage
of VQ < V. The reset threshold voltage can be
decreased by external connection of a voltage divider.

P/PG-DSO-20-1,-6,-7,-9,-14,-

The reset delay time can be set by an external capacitor.

Reset and sense output have integrated pull-up
resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also
possible to supervise the input voltage by using an integrated comparator to give a low
voltage warning.

Type TLE 4269 G TLE 4269 GM TLE 4269 GL

Package PG-DSO-8-16 PG-DSO-14-30 PG-DSO-20-35

Data Sheet

TLE 4269

PG-DSO-8-16
Ι1 SΙ 2 RADJ 3 D4
8Q 7 SO 6 RO 5 GND

AEP01668

Figure 1 Pin Configuration top view

Table 1 Pin No. 1 2 3 4 5 6

Pin Definitions and Functions TLE 4269 G

Symbol Function

Input block to GND directly at the IC with a ceramic capacitor.

Sense Input if not needed connect to Q.

RADJ Reset Threshold Adjust if not needed connect to GND.

Reset Delay to select delay time, connect to GND via capacitor.

Ground

Reset Output the open-collector output is internally linked to Q
via a 20 pull-up resistor. Keep open, if not needed.

Sense Output the open-collector output is internally linked to

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TLE4269GNTMA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: TLE4269GNTMA1 638740