PMB2335R-V11TR

PMB2335R-V11TR Datasheet

Mixer PMB 2335 Version

Part	Datasheet
PMB2335R-V11TR	PMB2335R-V11TR (pdf)

PDF Datasheet Preview
Wireless Components Mixer PMB 2335 Version Specification March 2000 Previous Version:Data Sheet Page in previous Version Page in current Version TE, TE, are registered trademarks of Infineon Technologies AG. ACE , ASM , ASP , POTSWIRE , QuadFALC , SCOUT are trademarks of Infineon Technologies AG. Edition Published by Infineon Technologies AG i. Gr., SC, Balanstraße 73, 81541 München Infineon Technologies AG i. Gr. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the Infineon Technologies AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life- support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended a to be implanted in the human body, or b to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. PMB 2335 Productinfo Productinfo General Description Features The mixer used in this design is a gen- Package eral purpose up-/downconversion gil- bert cell mixer. An amplified and filtered RF signal enters the IC via the pins MI/ MIX. Using an externally supplied local oscillator at LO/LOX a converted out- put signal is created at the open collec- tor output pins MO/MOX, which have to be connected to an external voltage supply. B6HF bipolar technology, 25GHz fT P-TSSOP-10-1 Gilbert cell mixer Reduced external components Mixer current adjustable with external resistors Low spurious signal content mA current consumption typical Power on pin no external resistors used Frequency range up to GHz Excellent port isolation Supply voltage - 4.5V Low noise -40°C to +85°C operational Ordering Information Type PMB 2335 Ordering Code Package P-TSSOP-10-1 Wireless Components Product Info Specification, March 2000 1 Table of Contents 2 Product Description 2-1 Overview. 2-2 Features 2-2 Application 2-2 Package Outlines 2-3 3 Functional Description. 3-1 Pin Configuration 3-2 Pin Definition and Function. 3-2 Circuit Description. 3-3 Functional Block Diagram. 3-3 4 Applications 4-1 Test Circuit 4-2 Test Circuit 4-3 Test Circuit 2a. 4-4 Test Circuit 2b. 4-4 Test Circuit 2c. 4-5 5 Reference 5-1 Absolute Maximum Ratings 5-2 Operating Range 5-3 AC/DC Characteristics 5-4 Input Impedance 5-6 2 Product Description Contents of this Chapter Overview. 2-2 Features 2-2 Application 2-2 Package Outlines 2-3 PMB 2335 Product Description Overview The mixer used in this design is a general purpose up-/downconversion gilbert cell mixer. An amplified and filtered RF signal enters the IC via the pins MI/MIX. Using an externally supplied local oscillator at LO/LOX a converted output signal is created at the open collector output pins MO/MOX, which have to be connected to an external voltage supply. B6HF bipolar technology, 25GHz fT Gilbert cell mixer Reduced external components Mixer current adjustable with external resistors mA current consumption typical no external resistors used Excellent port isolation Low noise Low spurious signal content Power on pin Frequency range up to GHz Supply voltage - 4.5V -40°C to +85°C operational temperature range Application Cellular radio mixer Cordless telephone mixer UHF Transceiver RF data links RF/VHF/UHF frequency conversion Wireless Components Specification, March 2000 PMB 2335 Product Description Package Outlines P- TSSOP-10-1 max. max. M A B C 6 max. M A B C Index Marking Wireless Components Specification, March 2000 3 Functional Description Contents of this Chapter Pin Configuration 3-2 Pin Definition and Function. 3-2 Circuit Description. 3-3 Functional Block Diagram. 3-3 Pin Configuration PMB 2335 Functional Description MO 1 MOX 2 GND 3 VCC 4 LOX 5 PMB 2335 10 STB 9 M IX 8 MI 7 GND 6 LO Figure 3-1 Pin Configuration

PDF Datasheet Preview

Wireless Components

Mixer PMB 2335 Version

Specification March 2000

Previous Version:Data Sheet

Page in previous Version

Page in current Version

TE, TE, are registered trademarks of Infineon Technologies AG.

ACE , ASM , ASP , POTSWIRE , QuadFALC , SCOUT are trademarks of Infineon Technologies AG.

Edition Published by Infineon Technologies AG i. Gr., SC, Balanstraße 73, 81541 München

Infineon Technologies AG i. Gr.

All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the Infineon Technologies AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-
support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended a to be implanted in the human body, or b to support and/or maintain and sustain human life. If they
fail, it is reasonable to assume that the health of the user may be endangered.

PMB 2335

Productinfo

Productinfo

General Description Features

The mixer used in this design is a gen- Package
eral purpose up-/downconversion gil-
bert cell mixer. An amplified and filtered

RF signal enters the IC via the pins MI/

MIX. Using an externally supplied local
oscillator at LO/LOX a converted out-
put signal is created at the open collec-
tor output pins MO/MOX, which have to
be connected to an external voltage
supply.

B6HF bipolar technology, 25GHz fT

P-TSSOP-10-1

Gilbert cell mixer

Reduced external components

Mixer current adjustable with
external resistors

Low spurious signal content
mA current consumption typical Power on pin
no external resistors used

Frequency range up to GHz

Excellent port isolation

Supply voltage - 4.5V

Low noise
-40°C to +85°C operational
Ordering Information

Type PMB 2335
Ordering Code

Package P-TSSOP-10-1

Wireless Components

Product Info

Specification, March 2000
1 Table of Contents
2 Product Description 2-1 Overview. 2-2 Features 2-2 Application 2-2 Package Outlines 2-3
3 Functional Description. 3-1 Pin Configuration 3-2 Pin Definition and Function. 3-2 Circuit Description. 3-3 Functional Block Diagram. 3-3
4 Applications 4-1 Test Circuit 4-2 Test Circuit 4-3 Test Circuit 2a. 4-4 Test Circuit 2b. 4-4 Test Circuit 2c. 4-5
5 Reference 5-1 Absolute Maximum Ratings 5-2 Operating Range 5-3 AC/DC Characteristics 5-4 Input Impedance 5-6
2 Product Description

Contents of this Chapter Overview. 2-2 Features 2-2 Application 2-2 Package Outlines 2-3

PMB 2335

Product Description

Overview

The mixer used in this design is a general purpose up-/downconversion gilbert cell mixer. An amplified and filtered RF signal enters the IC via the pins MI/MIX. Using an externally supplied local oscillator at LO/LOX a converted output signal is created at the open collector output pins MO/MOX, which have to be connected to an external voltage supply.

B6HF bipolar technology, 25GHz fT Gilbert cell mixer Reduced external components Mixer current adjustable with external resistors mA current consumption typical no external resistors used Excellent port isolation Low noise Low spurious signal content Power on pin Frequency range up to GHz Supply voltage - 4.5V -40°C to +85°C operational temperature range

Application

Cellular radio mixer Cordless telephone mixer UHF Transceiver RF data links RF/VHF/UHF frequency conversion

Wireless Components

Specification, March 2000

PMB 2335

Product Description

Package Outlines

P- TSSOP-10-1
max. max.

M A B C
6 max.

M A B C

Index Marking

Wireless Components

Specification, March 2000
3 Functional Description

Contents of this Chapter Pin Configuration 3-2 Pin Definition and Function. 3-2 Circuit Description. 3-3 Functional Block Diagram. 3-3

Pin Configuration

PMB 2335

Functional Description

MO 1 MOX 2 GND 3 VCC 4 LOX 5

PMB 2335
10 STB 9 M IX 8 MI 7 GND 6 LO

Figure 3-1 Pin Configuration

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PMB2335R-V11TR Datasheet file may be downloaded here without warranties.

Datasheet ID: PMB2335R-V11TR 638471