IPS031STRR

IPS031STRR Datasheet

IPS031 S

Part	Datasheet
IPS031STRR	IPS031STRR (pdf)

Related Parts	Information
IPS031	IPS031
IPS031S	IPS031S

PDF Datasheet Preview
Data Sheet No.PD 60150-J IPS031 S FULLY PROTECTED POWER MOSFET SWITCH • Over temperature shutdown • Over current shutdown • Active clamp • Low current & logic level input • E.S.D protection The IPS031/IPS031S are fully protected three terminal SMART POWER MOSFETs that feature over-current, over-temperature, ESD protection and drain to source active clamp.These devices combine a POWER MOSFET and a gate driver. They offer full protection and high reliability required in harsh environments. The driver allows short switching times and provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165oC or when the drain current reaches 12A. The device restarts once the input is cycled. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations. Product Summary Rds on V clamp Ishutdown Ton/Toff max 50V 12A 1.5µs Packages 3-Lead D2Pak IPS031S Typical Connection 3-Lead TO-220 IPS031 Load R in series if needed control S Logic signal Refer to lead assignment for correct pin configuration IPS031 S Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to SOURCE lead. TAmbient = 25oC unless otherwise specified . PCB mounting uses the standard footprint with 70 µm copper thickness. Symbol Vds Vin Iin, max Isd cont. Parameter Maximum drain to source voltage Maximum input voltage Maximum IN current Diode max. continuous current 1 rth=62oC/W IPS031 Min. -10 Max. 47 7 +10 Units V mA Test Conditions TO220 free air rth=5oC/W IPS031 rth=80oC/W IPS031S Isd pulsed Diode max. pulsed current 1 Maximum power dissipation 1 rth=62oC/W IPS031 rth=80oC/W IPS031S ESD1 Electrostatic discharge voltage Human Body ESD2 Electrostatic discharge voltage Machine Model T stor. Max. storage temperature Tj max. Max. junction temperature Tlead Lead temperature soldering, 10 seconds

PDF Datasheet Preview

Data Sheet No.PD 60150-J

IPS031 S

FULLY PROTECTED POWER MOSFET SWITCH
• Over temperature shutdown
• Over current shutdown
• Active clamp
• Low current & logic level input
• E.S.D protection

The IPS031/IPS031S are fully protected three terminal SMART POWER MOSFETs that feature over-current, over-temperature, ESD protection and drain to source active clamp.These devices combine a POWER MOSFET and a gate driver. They offer full protection and high reliability required in harsh environments. The driver allows short switching times and provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165oC or when the drain current reaches 12A. The device restarts once the input is cycled. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.

Product Summary

Rds on V clamp Ishutdown Ton/Toff
max 50V 12A 1.5µs

Packages
3-Lead D2Pak IPS031S

Typical Connection
3-Lead TO-220 IPS031

Load

R in series
if needed
control S

Logic signal

Refer to lead assignment for correct pin configuration

IPS031 S

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to SOURCE lead. TAmbient = 25oC unless otherwise specified . PCB mounting uses the standard footprint with 70 µm copper thickness.

Symbol Vds Vin Iin, max Isd cont.

Parameter Maximum drain to source voltage Maximum input voltage Maximum IN current Diode max. continuous current 1
rth=62oC/W IPS031

Min. -10

Max. 47 7 +10

Units V mA

Test Conditions

TO220 free air
rth=5oC/W IPS031
rth=80oC/W IPS031S

Isd pulsed Diode max. pulsed current 1

Maximum power dissipation 1
rth=62oC/W IPS031
rth=80oC/W IPS031S

ESD1 Electrostatic discharge voltage Human Body

ESD2 Electrostatic discharge voltage Machine Model

T stor. Max. storage temperature

Tj max. Max. junction temperature

Tlead

Lead temperature soldering, 10 seconds

More datasheets: 0215001.MXE | 021502.5MXE | 0215002.MXE | 0215004.MXE | 0215.315MXE | TX13/7.1/4.8-3C90 | 151-14601 | 151-14400 | DAMAM15PF225F0 | 10410000007

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IPS031STRR Datasheet file may be downloaded here without warranties.

Datasheet ID: IPS031STRR 638248