Article No. Part No. 151-06500 151-06500
Part | Datasheet |
---|---|
![]() |
151-14400 (pdf) |
Related Parts | Information |
---|---|
![]() |
151-14601 |
PDF Datasheet Preview |
---|
Engineered Fastening Solutions Bundle Separation Products Dual Swivel Saddle Spacer DSWS4 These saddle spacers are installed between two bundles such as wires, cables, hoses, tubing, conduit, etc. to separate them and prevent chafing and wear. The mounts can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle. Cable ties, which secure the bundles, are used with the mounts. The dual swivel saddle spacers accommodate cable ties up to 1/2” wide. The “H” profile of the saddles allows for broad surface contact with the bundle, minimizing pinching and crushing of the bundle, and it accepts a wide range of bundle diameters from inches to 3 inches. The DSWS4 Dual Swivel Saddle Spacer provides a inch millimeter separation between bundles. Friction tabs in the tie slots help hold the cable ties in place during assembly. The DSWS4 is two-shot molded with polyacetal and polyamide heat stabilized materials. Material Data Material Operating Temperature Flammability Polyacetal POM -40 °F to +185 °F -40 °C to +85 °C continuous UL94 HB swivels Patents Pending Material Data Material Operating Temperature Flammability Polyamide heat stabilized PA66HS -40 °F to +221 °F -40 °C to +105 °C continuous UL94 V2 Product Selection Bundle Ø Minimum Extraction Strength Length L Width W Height H Article No. Part No. 151-06500 151-06500 Type DSWS4 Cable Tie Series in. mm T50 - T250 - 3” - lb. N 100 lb. 445 in. mm in. mm in. mm 18 Color Black Pkg. Qty. 2200 151-00644 151-00644 DSWS4 T50 - T250 - 3” - 100 lb. 445 18 Black Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Dual Swivel Saddle Spacer DSWS5 These saddle spacers are installed between two bundles such as wires, cables, hoses, tubing, conduit, etc. to separate them and prevent chafing and wear. The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle. Cable ties, which secure the bundles, are used with the spacers. The DSWS5 accepts bundle diameters ranging from inches to 6 inches. The DSWS5 provides a inch millimeter separation between bundles. The dual swivel saddle spacers accommodate cable ties up to 1/2” wide. Engineered Fastening Solutions Bundle Separation Products Material Data Material Operating Temperature Flammability Polyamide heat stabilized PA66HS -40 °F to +221 °F -40 °C to +105 °C continuous UL94 V2 swivels H Product Selection Article No. Part No. 151-06502 DSWS50HSK2 Type DSWS5 Bundle Ø Length L Width W Height H Cable Tie Series in. mm in. mm in. mm in. mm T50 - T250 - 6” - Color Black Pkg. Qty. 151-06501 DSWS50HSH1 DSWS5 - 6” T50 - T250 Black Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Dual Clamp Ties HellermannTyton’s dual clamp ties are designed to provide parallel separation between hoses, wires, cables and tubing, protecting them from abrasion. These ties have an optional mounting hole for securing bundles along the chassis of trucks, trailers, and heavy duty equipment. The unique, one-piece design features the dual head centered on the strap. Available in two lengths, the dual clamp ties accommodate bundles ranging from inches to inches. The flexible wide straps minimize pinching of hoses and convoluted tubing. The straps are also releasable. Material Data Material Operating Temperature Flammability Polyamide impact modified, Heat Stabilized, UV Resistant PA66HIRHS -40 °F to +230 °F -40 °C to +110 °C continuous UL94 HB U.S. Patent Number 5,966,781 Product Selection Article No. 115-30900 DCT90HIRK2 Type DCT9 Stud Ø Min. Tensile Strength Length L Max. Ø Bundle each side Width W in. mm lbs. N in. mm in. mm in. mm Color Pkg. Qty. 150 lbs 670 331 Black 115-00034 DCT90HIRC2 DCT9 150 lbs 670 331 Black 100 115-31100 DCT110HIRK2 DCT11 150 lbs 670 489 Black 115-00033 DCT110HIRC2 DCT11 150 lbs 670 489 Black 100 Installation tools - MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Standoff Mounting Dual Clamp Ties HellermannTyton’s standoff dual clamp tie offers the same features as the standard dual clamp tie with a standoff mount that secures the bundle away from the side of the frame rail, protecting the bundles from bolts and other protrusions. Features - Wide strap minimizes pinching of soft hoses & con- voluted tubing - Clamping rails increase circumferential grip on varying bundle diameters - Locking stud mount pawls allow for easy hand insertion - Nut or weld nesting counterbore provides flush mounting at the base - Socket counterbore for fastening a nut provides added retention Engineered Fastening Solutions Bundle Separation Products Material Data Material Operating Temperature Flammability Polyamide impact modified, Heat Stabilized, UV Resistant PA66HIRHS -40 °F to +230 °F -40 °C to +110 °C continuous UL94 HB Product Selection Article No. Type 117-00012 117-00012 SDCTR312 Stud Ø in. mm Min. Tensile Strength lbs. N Length L Max. Ø Bundle each side Width W in. mm in. mm in. mm Color Pkg. Qty. 100 lbs 445 511 Black 250 157-00060 157-00060 SDCTL312 100 lbs 445 663 Black 250 Installation tools - MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Double Head Ties Double head ties create two loops that separate two bundles. They can also be used to secure a bundle to an existing fixing point. Material Data Material Operating Temperature Flammability Polyamide PA66 -40 °F to +185 °F -40 °C to +85 °C continuous UL94 V2 Product Selection File# E64139 Min. Tensile Strength Length L Width W Article No. Type lbs. N in. mm in. mm Color Pkg. Qty. T50SDH 117-00016 117-00017 117-00016 117-00017 T50SDH 50 lbs 50 lbs 225 159 225 159 Natural 100 1000 117-00018 117-00019 117-00018 117-00019 T50SDH 50 lbs 50 lbs 225 159 225 159 Black 100 1000 T50RDH 117-05006 117-05008 T50RDH9C2 T50RDH9M4 T50RDH 50 lbs 50 lbs Maximum bundle diameter is variable due to double loops. Installation tools - MK7, MK7HT, MK7P, MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Pipe and Hose Clips, PC-Series Pipe and hose clips offer simple and secure installation of pipes or hoses to panels. These clips can be attached to the panel prior to installing the pipe or hose. Simply push the pipe into the clip for a firm and secure fixing. These parts can be connected together offering a greater choice of installation options. Material Data Material Operating Temperature Polyamide PA66 -40 °F to +185 °F -40 °C to +85 °C continuous Flammability UL94 V2 Material Data Material Operating Temperature Flammability Polyamide impact modified PA66HIR -40 °F to +176 °F -40 °C to +80 °C continuous UL94 HB Product Selection Article No. Part No. Type 151-00096 151-00096 IPC10AH 151-14130 151-14130 IPC13AH 151-14500 151-14500 IPC15AH 151-14601 151-14601 IPC23AH Height H Width W Disc Ø Max. Max. Ø Mounting Panel Bundle Hole Ø Thickness in. mm in. mm in. mm in. mm in. mm in. mm Material PA66HIR PA66 PA66HIR PA66 Color Black Use Part No. for ordering and Type for specification purposes. Pkg. Qty. 100 IPC AH Clip connecte Product Selection Height Width Max. Ø W Bundle Article No. Part No. Type 151-14400 151-14400 IPC10P in. mm in. mm in. mm Material PA66HIR 151-14132 151-14132 IPC13P PA66 151-14502 151-14502 IPC15P PA66HIR 151-14603 151-14603 IPC23P PA66 Use Part No. for ordering and Type for specification purposes. Color Black Pkg. Qty. 100 | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 IPC P Clip connected 13 Engineered Fastening Solutions Bundle Separation Products Automatic Harness Clips Connectable In addition to offering the same simple and secure method of attaching cables to panels as the non-connectable automatic harness clips, these products can be connected for additional installation flexibility. Material Data Material Polyamide impact modified, Heat Stabilized, UV Resistant PA66HIRHS Operating -40 °F to +230 °F -40 °C to +110 °C Temperature continuous Flammability UL94 HB Product Selection Article No. Part No. Type 151-00378 151-00378 IAHC3AH Length L in. Length L2 in. mm Width W in. mm 151-00211 151-00211 IAHC4AH Use Part No. for ordering and Type for specification purposes. Disc Ø in. Max. Ø Bundle in. mm Mounting Hole Ø in. mm Panel Thickness in. mm Min. Max. Pkg. Color Qty. Black 500 Black 450 Product Selection Length Width Max. Ø W Bundle Article No. Type in. mm in. mm in. mm 151-00223 151-00199 151-00213 151-00207 151-00223 IAHC1T 151-00199 IAHC2T 151-00213 IAHC3T 151-00207 IAHC4T 151-00195 151-00195 IAHC5T Use Part No. for ordering and Type for specification purposes. Color Black Pkg. Qty. 1300 700 400 1000 700 Elements AH and T connected. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Automatic Harness Clips Non-connectable These clips offer a simple and secure method of attaching cables to panels. They can be attached to the panel prior to installing the cables. Simply pushing the cable into place closes the clip and activates the automatic locking feature. Material Data Material Operating Temperature Flammability Polyamide impact modified, Heat Stabilized, UV Resistant PA66HIRHS -40 °F to +230 °F -40 °C to +110 °C continuous UL94 HB Product Selection Article No. Part No. 151-00366 151-00366 151-00367 151-00367 Type AHC1AH AHC2AH Length Width Disc Ø Min. Max. Max. Ø Mounting Panel Bundle Hole Ø Thickness in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm Color Pkg. Qty. Black 1500 Black 900 Use Part No. for ordering and Type for specification purposes. Product Selection Length Width Max. Ø W Bundle Article No. Type in. mm in. mm in. mm 151-00206 151-00206 AHC2SS Use Part No. for ordering and Type for specification purposes. Color Pkg. Qty. Black 1000 | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Isolator HellermannTyton’s isolator mount is used to align and separate 1/4” tubing or brake lines. Easy to assemble, the isolator dampens vibrations and can be used with up to four brake lines. Mounting the isolator can be accomplished with HellermannTyton’s standard cable ties, button head ties and any of HellermannTyton’s heavy equipment mounts. Mounting is optional, but recommended for long runs. The isolator is durable, chemical and abrasion resistant, and remains flexible in low temperatures. Material Data Material Thermoplastic Vulcanizate TPV Operating -50 °F to +329 °F -45 °C to +200 °C Temperature continuous Flammability UL94 HB Product Selection Max Bundle Ø Mounting Ø Overall Ø Spacing Between Clips Width W Article No. Part No. Type Cable Tie Series in. mm in. mm in. mm in. mm in. mm 151-00455 ISO4X250H1 ISO4X250 T50 - T250 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Color Black Pkg. Qty. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Bundle Separation Products Wire and Hose Swivel Clip Tie This simple to use inside serrated tie provides the opportunity to attach an additional wire or hose to an existing harness. Offering a full 360 degrees of rotation, the wire/hose can be oriented in any direction in relation to the main harness. It is ideally suited for any application in which the wire or hose can move in relation to the mounting point. T50SVC rotates in any direction. Material Data Material Operating Temperature Flammability Polyamide heat stabilized PA66HS -40 °F to +221 °F -40 °C to +105 °C continuous UL94 V2 T50SVC Product Selection Tensile Strength Hose Clip Ø Maximum Bundle Ø Length L Width W Article No. Part No. Type lbs N in. mm in. mm in. mm in. mm 155-31202 155-31202 T50SVC 50 lbs 222 Installation tools - MK7, MK7HT, MK7P, MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Pkg. Color Qty. Black 500 | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Mounts Heavy Duty Mounts The heavy duty mount, when used with a cable tie, eliminates the need to carry multiple sizes of fixed bundle diameter clamps, which reduces inventory and purchasing costs while simplifying the assembly process. The heavy duty mount and cable tie combination makes it easy to service bundles in the field. Simply remove the cable tie, leave the mount in place, and replace the cable tie. The heavy duty mounts are designed for use with HellermannTyton’s heavy duty T250, T255, and wide strap cable ties to harness wires and hoses however, they accept all standard cable ties up to wide. Material Data Material Operating Temperature Flammability Polyamide impact modified, Heat Stabilized, UV Resistant PA66HIRHS -40 °F to +230 °F -40 °C to +110 °C continuous UL94 HB U.S. Patent Number 5,820,083 Standard Torque Mounts These mounts contain a small tab inside the mounting hole to temporarily engage the threads, which allows assemblers to pre-install the mount on a stud before securing with a washer and a nut. Product Selection Max Ø for Washer/ Length Width Mounting Torque Socket Pkg. Article No. Type in. mm lb. - in. mm in. mm in. mm Color Qty. ST151-00134 HDM190HIRC2 HDM19 115 lb. - in. Black 100 151-00436 HDM190HIRH4 HDM19 115 lb. - in. Black 500 L 151-00437 HDM250HIRC2 151-00438 HDM250HIRH4 HDM25 115 lb. - in. Black 100 HDM25 115 lb. - in. Black 500 151-00439 HDM3120HIRC2 HDM312 8 115 lb. - in. Black 100 151-00440 HDM3120HIRH4 HDM312 8 115 lb. - in. Black 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Medium Torque Mounts The arched "H" profile of the saddle surface allows for a broad surface contact with the bundle, minimizing pinching and crushing of the bundles, and adjusts to a wide variety of bundle diameters. Product Selection Article No. Part No. Max Ø for Washer/ Length Width Mounting Torque Socket Pkg. Type in. mm lb. - ft. in. mm in. mm in. mm Color Qty. ST151-00441 HDM321HIHSUVC2 HDM321 8 40 lb. - ft. 23 46 24 Black 100 151-07100 HDM321HIHSUVH4 HDM321 8 40 lb. - ft. 23 46 24 Black 500 151-00442 HDM401HIHSUVC2 HDM401 40 lb. - ft. 23 46 24 Black 100 151-07300 HDM401HIHSUVH4 HDM401 40 lb. - ft. 23 46 24 Black 500 151-00443 HDM501HIHSUVC2 HDM501 40 lb. - ft. 23 46 24 Black 100 151-07500 HDM501HIHSUVH4 HDM501 40 lb. - ft. 23 46 24 Black 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 Engineered Fastening Solutions Mounts Heavy Duty Mounts continued High Torque Mounts The high torque mount is designed for use with power-assisted impact wrenches and is molded with a metal bushing to withstand the forces required to tighten grade 8 bolts. The arched "H" profile of the saddle surface allows for a broad surface contact with the bundle, minimizing pinching and crushing of bundles, and it adjusts to a wide variety of bundle diameters. Product Selection Mounting Max Torque Max Ø for Washer/ Socket Length L Width W Article No. Part No. Type in. mm lb. - ft. in. mm in. mm Pkg. mm Color Qty. ST151-00444 HDM320BHIHSUVC2 HDM320 8 114 lb. - ft. 23 47 25 Black 100 151-07000 HDM320BHIHSUVH4 HDM320 8 114 lb. - ft. 23 47 25 Black 500 151-00445 HDM400BHISHUVC2 HDM400 114 lb. - ft. 32 47 25 Black 100 151-07200 HDM400BHIHSUVH4 HDM400 114 lb. - ft. 32 47 25 Black 500 151-00446 HDM500BHIHSUVC2 HDM500 114 lb. - ft. 32 47 25 Black 100 151-07400 HDM500BHIHSUVH4 HDM500 114 lb. - ft. 32 47 25 Black 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. High Torque Double Mount This mount is designed for use with power-assisted impact wrenches and is molded with a metal bushing to withstand the forces required to tighten grade 8 bolts. The high torque double mount secures the bundle directly over the mounting fastener. The cable ties are held in place during assembly with friction tabs inside the cable tie slots. The arched "H" profile of the saddle surface allows for a broad surface contact with the bundle, minimizing pinching and crushing of the bundles, and accommodates a wide variety of bundle diameters. Product Selection Article No. Part No. Type Mounting in. mm Max Torque lb. - ft. Max Ø for Washer/ Socket in. mm Length L in. mm Width W in. mm Pkg. Color Qty. ST151-00456 151-00456 HDM375 114 lb. - ft. 87 Black 100 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. | w h e l e r m a n t y t o n c o m 1 - 8 0 - 5 3 7 - 1 5 1 2 |
More datasheets: 02153.15MXE | 02151.25MXE | 021506.3MXE | 0215001.MXE | 021502.5MXE | 0215002.MXE | 0215004.MXE | 0215.315MXE | TX13/7.1/4.8-3C90 | 151-14601 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 151-14400 Datasheet file may be downloaded here without warranties.