ICE3BR1065J
Part | Datasheet |
---|---|
![]() |
ICE3BR1065JXKLA1 (pdf) |
PDF Datasheet Preview |
---|
Version 19 Nov 2012 ICE3BR1065J Off-Line SMPS Current Mode Controller with integrated 650V and Startup cell frequency jitter Mode in DIP-8 Power Management & Supply Never stop thinking. 2012-11-19 Previous Version: Datasheet Version For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at are trademarks of Infineon Technologies AG. Edition 2012-11-19 Published by Infineon Technologies AG, 81726 Munich, Germany, 2012 Infineon Technologies AG. All Rights Reserved. Legal disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies Office Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies Office. Infineon Technologies Components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ICE3BR1065J Off-Line SMPS Current Mode Controller with integrated 650V and Startup cell frequency jitter Mode in DIP-8 Product Highlights • Active Burst Mode to reach the lowest Standby Power Requirements < 50mW • Auto Restart protection for overload, overtemperature, overvoltage PG-DIP-8 • External auto-restart enable function • Built-in soft start and blanking window • Extendable blanking Window for high load jumps • Built-in frequency jitter and soft driving for low EMI • Green Mould Compound • Pb-free lead plating RoHS compliant • 650V avalanche rugged with built-in Startup Cell The jitter series ICE3BRxx65J is the latest version of It targets for the Off-Line • Active Burst Mode for lowest Standby Power battery adapters and low cost SMPS for lower power • Fast load jump response in Active Burst Mode range such as application for DVD R/W, DVD Combi, Blue • 65kHz internally fixed switching frequency ray DVD player, set top box, etc. Besides inherited the • Auto Restart Protection Mode for Overload, Open outstanding performance of the in the Loop, VCC Undervoltage, Overtemperature & BiCMOS technology, active burst mode, auto-restart Overvoltage • Built-in Soft Start |
More datasheets: R507-104-000 | R507-200-000 | R507-162-000 | R507-120-000 | R507-124-000 | R507-122-000 | R507-100-000 | ICS726TLFT | BSO303SPNTMA1 | DDMY50PNMBK52 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICE3BR1065JXKLA1 Datasheet file may be downloaded here without warranties.