EVALLED-ICL8002G-B1
EVALLED-ICL8002G-B1 Datasheet
AN-EVALLED-ICL8002G-B1
| Part | Datasheet |
|---|---|
EVALLED-ICL8002G-B1 |
EVALLED-ICL8002G-B1 (pdf) |
| PDF Datasheet Preview |
|---|
| Phase Cut Dimmable Isolated Flyback Converter for LED Retrofit Bulb with ICL8002G & CoolMOS 800V CE Application Note Power Management & Multimarket Edition 2012-08-03 Published by Infineon Technologies AG 81726 Munich, Germany 2012 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. AN-EVALLED-ICL8002G-B1 Phase Cut Dimmable Isolated Flyback Converter for LED Retrofit Bulb with ICL8002G & CoolMOS 800V CE ICL8002G Previous Version: Add “Production tolerance and distribution” Application Note Version 2012-08-03 AN-EVALLED-ICL8002G-B1 Phase Cut Dimmable Isolated Flyback Converter for LED Retrofit Bulb with ICL8002G & CoolMOS 800V CE Introduction 5 List of Features 5 Technical Specification 5 Demo Board Design 6 Demo Board PCBA 6 Schematic 6 TRIAC Based Dimmer Compatibility 7 Single Stage Power Factor Correction 7 Line Regulation 7 Setup and Results , 8 Input / Output 8 Input 8 Output 8 Power Up 8 MOSFET Operation Waveforms 9 Constant Output Power Control 9 Output Waveforms 11 Input Waveforms 11 Phase Cut Dimming 12 Test set-up 12 Waveforms during dimming 12 List of compatible phase cut dimmers 12 System Efficiency 13 Protection Functions 14 Output Open Circuit Protection 14 Output Short Circuit Protection 14 Conducted EMI 14 Production Tolerance and Normal Distribution 15 Board Layout 16 BOM and Transformer Spec 17 Bill of Material 17 Transformer 18 Design Customization 19 Common Questions and Troubleshooting Hints 20 Q&A 20 Troubleshooting hints 20 References 21 Application Note |
| More datasheets: ER302-AP | ER303-AP | ER306-AP | ATA006A0X4-SR | ATA006A0X-SR | DCMAM62S | BTS436L2G | BTS436L2S | BTS436L2 | ZL30410QCG1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVALLED-ICL8002G-B1 Datasheet file may be downloaded here without warranties.