C505CA4EMCAKXQMA1

C505CA4EMCAKXQMA1 Datasheet

C505 C505C C505A C505CA

Part	Datasheet
C505CA4EMCAKXQMA1	C505CA4EMCAKXQMA1 (pdf)

Related Parts	Information
C505CA4EMCAFXUMA1	C505CA4EMCAFXUMA1
C505CALMCAFXUMA1	C505CALMCAFXUMA1
C505CA4EMCABXUMA1	C505CA4EMCABXUMA1

PDF Datasheet Preview
Data Sheet, Dec. 2000 C505 C505C C505A C505CA 8-Bit Single-Chip Microcontroller Microcontrollers Never stop thinking. Edition 2000-12 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet, Dec. 2000 C505 C505C C505A C505CA 8-Bit Single-Chip Microcontroller Microcontrollers Never stop thinking. C505/C505C/C505A/C505CA Data Sheet Current Version 2000-12 Previous Releases : in previous in current version version Version register VR2 for C505A-4R/C505CA-4R BB step is updated. Controller Area Network CAN License of Robert Bosch GmbH We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to: 8-Bit Single-Chip Microcontroller C500 Family Advance Information • Fully compatible to standard 8051 microcontroller • Superset of the 8051 architecture with 8 datapointers • Up to 20 MHz operating frequency 375 ns instruction cycle time MHz 300 ns instruction cycle time MHz 50 % duty cycle • On-chip program memory with optional memory protection C505 C A -2R : 16K byte on-chip ROM C505A-4R/C505CA-4R 32K byte on-chip ROM C505A-4E/C505CA-4E 32K byte on-chip OTP Ordering Information The ordering code for Infineon Technologies’ microcontrollers provides an exact reference to the required product. This ordering code identifies: • the derivative itself, i.e. its function set • the specificed temperature rage • the package and the type of delivery For the available ordering codes for the C505 please refer to the “Product information Microcontrollers”, which summarizes all available microcontroller variants. Data Sheet C505/C505C/C505A/C505CA VAREF VAGND XTAL1 XTAL2 RESET EA ALE PSEN VDD VSS C505 C505C C505A C505CA Port 0 8-bit Digital I/O Port 1 8-bit Digital I/O / 8-bit Analog Inputs Port 2 8-bit Digital I/O Port 3 8-bit Digital I/O Port 4 2-bit Digital I/O Figure 2 Logic Symbol Note The ordering codes for the Mask-ROM versions are defined for each product after verification of the respective ROM code. Data Sheet C505/C505C/C505A/C505CA P0.4 / AD4 P0.5 / AD5 P0.6 / AD6 P0.7 / AD7 EA P4.1 / RXDC ALE PSEN P2.7 / A15 P2.6 / A14 P2.5 / A13 P0.3 / AD3 P0.2 / AD2 P0.1 / AD1 P0.0 / AD0 V AREF V AGND P1.0 / AN0 / INT3 / CC0 P1.1 / AN1 / INT4 / CC1 P1.2 / AN2 / INT5 / CC2 P1.3 / AN3 / INT6 / CC3 P1.4 / AN4 33 32 31 30 29 28 27 26 25 24 23 C505 C505C C505A C505CA 1 2 3 4 5 6 7 8 9 10 11 P2.4 / A12 P2.3 / A11 P2.2 / A10 P2.1 / A9 P2.0 / A8 V DD V SS XTAL1 XTAL2 P3.7 / RD P3.6 / WR P1.5 / AN5 / T2EX P1.6 / AN6 / CLKOUT P1.7 / AN7 / T2 RESET P3.0 / RxD P4.0 / TXDC P3.1 / TxD P3.2 / INT0 P3.3 / INT1 P3.4 / T0 P3.5 / T1 This pin functionality is not available in the C505/C505A. Figure 3 C505 Pin Configuration P-MQFP-44 Package Top View Data Sheet C505/C505C/C505A/C505CA Table 2 Pin Definitions and Functions Symbol P1.0-P1.7 Pin Number I/O * 40-44,1-3 Function Port 1 is an 8-bit quasi-bidirectional port with internal pull-up arrangement. Port 1 pins can be used for digital input/output or as analog inputs of the A/D converter. Port 1 pins that have 1’s written to them are pulled high by internal pull-up transistors and in that state can be used as inputs. As inputs, port 1 pins being externally pulled low will source current IIL, in the DC characteristics because of the internal pullup transistors. Port 1 pins are assigned to be used as analog inputs via the register P1ANA. As secondary digital functions, port 1 contains the interrupt, timer, clock, capture and compare pins. The output latch corresponding to a secondary function must be programmed to a one 1 for that function to operate except for compare functions . The secondary functions are assigned to the pins of port 1 as follows: 40 41 42 43 44 1 2 3 * I = Input O = Output P1.0 / AN0 / INT3 / CC0 Analog input channel 0 interrupt 3 input / capture/compare channel 0 I/O P1.1 / AN1 / INT4 / CC1 Analog input channel 1/ interrupt 4 input / capture/compare channel 1 I/O P1.2 / AN2 / INT5 / CC2 Analog input channel 2 / interrupt 5 input / capture/compare channel 2 I/O

PDF Datasheet Preview

Data Sheet, Dec. 2000

C505 C505C C505A C505CA
8-Bit Single-Chip Microcontroller

Microcontrollers

Never stop thinking.

Edition 2000-12

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Data Sheet, Dec. 2000

C505 C505C C505A C505CA
8-Bit Single-Chip Microcontroller

Microcontrollers

Never stop thinking.

C505/C505C/C505A/C505CA Data Sheet

Current Version 2000-12

Previous Releases :
in previous in current
version
version

Version register VR2 for C505A-4R/C505CA-4R BB step is updated.

Controller Area Network CAN License of Robert Bosch GmbH

We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to:
8-Bit Single-Chip Microcontroller C500 Family

Advance Information
• Fully compatible to standard 8051 microcontroller
• Superset of the 8051 architecture with 8 datapointers
• Up to 20 MHz operating frequency
375 ns instruction cycle time MHz
300 ns instruction cycle time MHz 50 % duty cycle
• On-chip program memory with optional memory protection

C505 C A -2R :
16K byte on-chip ROM

C505A-4R/C505CA-4R 32K byte on-chip ROM

C505A-4E/C505CA-4E 32K byte on-chip OTP
Ordering Information
The ordering code for Infineon Technologies’ microcontrollers provides an exact reference to the required product. This ordering code identifies:
• the derivative itself, i.e. its function set
• the specificed temperature rage
• the package and the type of delivery
For the available ordering codes for the C505 please refer to the “Product information Microcontrollers”, which summarizes all available microcontroller variants.

Data Sheet

C505/C505C/C505A/C505CA

VAREF VAGND

XTAL1 XTAL2

RESET EA

ALE PSEN

VDD VSS

C505 C505C C505A C505CA

Port 0 8-bit Digital I/O

Port 1 8-bit Digital I/O / 8-bit Analog Inputs

Port 2 8-bit Digital I/O

Port 3 8-bit Digital I/O

Port 4 2-bit Digital I/O

Figure 2 Logic Symbol
Note The ordering codes for the Mask-ROM versions are defined for each product after verification of the respective ROM code.

Data Sheet

C505/C505C/C505A/C505CA

P0.4 / AD4 P0.5 / AD5 P0.6 / AD6 P0.7 / AD7 EA P4.1 / RXDC ALE PSEN P2.7 / A15 P2.6 / A14 P2.5 / A13

P0.3 / AD3 P0.2 / AD2 P0.1 / AD1 P0.0 / AD0

V AREF V AGND

P1.0 / AN0 / INT3 / CC0 P1.1 / AN1 / INT4 / CC1 P1.2 / AN2 / INT5 / CC2 P1.3 / AN3 / INT6 / CC3

P1.4 / AN4
33 32 31 30 29 28 27 26 25 24 23

C505

C505C

C505A

C505CA
1 2 3 4 5 6 7 8 9 10 11

P2.4 / A12 P2.3 / A11 P2.2 / A10 P2.1 / A9 P2.0 / A8 V DD V SS XTAL1 XTAL2 P3.7 / RD P3.6 / WR

P1.5 / AN5 / T2EX P1.6 / AN6 / CLKOUT

P1.7 / AN7 / T2 RESET

P3.0 / RxD P4.0 / TXDC

P3.1 / TxD P3.2 / INT0 P3.3 / INT1

P3.4 / T0 P3.5 / T1

This pin functionality is not available in the C505/C505A.

Figure 3 C505 Pin Configuration P-MQFP-44 Package Top View

Data Sheet

C505/C505C/C505A/C505CA

Table 2 Pin Definitions and Functions

Symbol P1.0-P1.7

Pin Number I/O *
40-44,1-3

Function

Port 1 is an 8-bit quasi-bidirectional port with internal pull-up arrangement. Port 1 pins can be used for digital input/output or as analog inputs of the A/D converter. Port 1 pins that have 1’s written to them are pulled high by internal pull-up transistors and in that state can be used as inputs. As inputs, port 1 pins being externally pulled low will source current IIL, in the DC characteristics because of the internal pullup transistors. Port 1 pins are assigned to be used as analog inputs via the register P1ANA. As secondary digital functions, port 1 contains the interrupt, timer, clock, capture and compare pins. The output latch corresponding to a secondary function must be programmed to a one 1 for that function to operate except for compare functions . The secondary functions are assigned to the pins of port 1 as follows:
40 41 42 43 44 1 2 3
* I = Input O = Output

P1.0 / AN0 / INT3 / CC0 Analog input channel 0
interrupt 3 input /
capture/compare channel 0 I/O

P1.1 / AN1 / INT4 / CC1 Analog input channel 1/
interrupt 4 input /
capture/compare channel 1 I/O

P1.2 / AN2 / INT5 / CC2 Analog input channel 2 /
interrupt 5 input /
capture/compare channel 2 I/O

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C505CA4EMCAKXQMA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: C505CA4EMCAKXQMA1 637982