SAF-C165UTAH-LF V1.3

SAF-C165UTAH-LF V1.3 Datasheet

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Part	Datasheet
SAF-C165UTAH-LF V1.3	SAF-C165UTAH-LF V1.3 (pdf)

PDF Datasheet Preview
Data Sheet, DS 2, Feb. 2001 C165UTAH Embedded C166 with USB, IOM-2 and HDLC Support Version Wired Communications Never stop thinking. Edition 2001-02-23 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet, DS 2, Feb. 2001 C165UTAH Embedded C166 with USB, IOM-2 and HDLC Support Version Wired Communications Never stop thinking. C165UTAH 2001-02-23 Data Sheet, DS11 Page 91 330 529 Correction of the PEC Control Register The correct channel numbers are PEC channels 0 and The name of the corresponding register is PECXC2 and not PECXC1. Correction AS2 in was removed Correction of the Parameter t14. Improved formatting text, figures, tables 1 All previous distributed versions are preliminary. They have been replaced by this version. For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at C165UTAH Table of Contents Overview 11 Key Features 12 Logic Symbol 15 Pinning Diagram 16 Typical Applications 17 ISDN NT and PBX Applications 17 Pin Descriptions 18 C165UTAH Pin Diagram 18 C165UTAH Pin Definitions and Functions 19 Architectural Overview 28 Basic CPU Concepts and Optimizations 29 On-Chip System Resources 34 A detailed description of each single instruction, including its operand data type, condition flag settings, addressing modes, length number of bytes and object code format is provided in the “Instruction Set Manual” for the C16x Family. This manual also provides tables ordering the instructions according to various criteria, to allow quick references. Summary of Instruction Classes Grouping the various instruction into classes aids in identifying similar instructions eg. SHR, ROR and variations of certain instructions eg. ADD, ADDB . This provides an easy access to the possibilities and the power of the instructions of the C165UTAH. Note The used mnemonics refer to the detailled description. Arithmetic Instructions • Addition of two words or bytes • Addition with Carry of two words or bytes • Subtraction of two words or bytes • Subtraction with Carry of two words or bytes • 16*16 bit signed or unsigned multiplication • 16/16 bit signed or unsigned division • 32/16 bit signed or unsigned division • 1's complement of a word or byte • 2's complement negation of a word or byte: ADD ADDC SUB SUBC MUL DIV DIVL CPL NEG ADDB ADDCB SUBB SUBCB MULU DIVU DIVLU CPLB NEGB Logical Instructions • Bitwise ANDing of two words or bytes • Bitwise ORing of two words or bytes • Bitwise XORing of two words or bytes: AND OR XOR ANDB ORB XORB Compare and Loop Control Instructions • Comparison of two words or bytes • Comparison of two words with post-increment by either 1 or 2 • Comparison of two words with post-decrement by either 1 or 2: CMP CMPI1 CMPD1 CMPB CMPI2 CMPD2 Data Sheet 2001-02-23 C165UTAH Boolean Bit Manipulation Instructions • Manipulation of a maskable bit field in either the high or the low byte of a word: • Setting a single bit to ‘1’ • Clearing a single bit to ‘0’ • Movement of a single bit • Movement of a negated bit • ANDing of two bits • ORing of two bits • XORing of two bits • Comparison of two bits: Instruction Set Summary BFLDH BSET BCLR BMOV BMOVN BAND BOR BXOR BCMP BFLDL Shift and Rotate Instructions • Shifting right of a word: • Shifting left of a word: • Rotating right of a word: • Rotating left of a word: • Arithmetic shifting right of a word sign bit shifting ASHR Prioritize Instruction • Determination of the number of shift cycles required to normalize a word operand floating point support : PRIOR Data Movement Instructions • Standard data movement of a word or byte • Data movement of a byte to a word location with either sign or zero byte extension: MOV MOVBS MOVB MOVBZ

PDF Datasheet Preview

Data Sheet, DS 2, Feb. 2001

C165UTAH

Embedded C166 with USB, IOM-2 and HDLC Support

Version

Wired Communications

Never stop thinking.

Edition 2001-02-23

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Data Sheet, DS 2, Feb. 2001

C165UTAH Embedded C166 with USB, IOM-2 and HDLC Support

Version

Wired Communications

Never stop thinking.

C165UTAH
2001-02-23 Data Sheet, DS11

Page 91
330 529

Correction of the PEC Control Register The correct channel numbers are PEC channels 0 and The name of the corresponding register is PECXC2 and not PECXC1.

Correction AS2 in was removed

Correction of the Parameter t14.

Improved formatting text, figures, tables
1 All previous distributed versions are preliminary. They have been replaced by this version.

For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at

C165UTAH

Table of Contents

Overview 11 Key Features 12 Logic Symbol 15 Pinning Diagram 16 Typical Applications 17

ISDN NT and PBX Applications 17

Pin Descriptions 18

C165UTAH Pin Diagram 18

C165UTAH Pin Definitions and Functions 19

Architectural Overview 28

Basic CPU Concepts and Optimizations 29

On-Chip System Resources 34
A detailed description of each single instruction, including its operand data type, condition flag settings, addressing modes, length number of bytes and object code format is provided in the “Instruction Set Manual” for the C16x Family. This manual also provides tables ordering the instructions according to various criteria, to allow quick references.

Summary of Instruction Classes

Grouping the various instruction into classes aids in identifying similar instructions eg. SHR, ROR and variations of certain instructions eg. ADD, ADDB . This provides an easy access to the possibilities and the power of the instructions of the C165UTAH.

Note The used mnemonics refer to the detailled description.

Arithmetic Instructions
• Addition of two words or bytes
• Addition with Carry of two words or bytes
• Subtraction of two words or bytes
• Subtraction with Carry of two words or bytes
• 16*16 bit signed or unsigned multiplication
• 16/16 bit signed or unsigned division
• 32/16 bit signed or unsigned division
• 1's complement of a word or byte
• 2's complement negation of a word or byte:

ADD ADDC SUB SUBC MUL DIV DIVL CPL NEG

ADDB ADDCB SUBB SUBCB MULU DIVU DIVLU CPLB NEGB

Logical Instructions
• Bitwise ANDing of two words or bytes
• Bitwise ORing of two words or bytes
• Bitwise XORing of two words or bytes:

AND OR XOR

ANDB ORB XORB

Compare and Loop Control Instructions
• Comparison of two words or bytes
• Comparison of two words with post-increment
by either 1 or 2
• Comparison of two words with post-decrement
by either 1 or 2:

CMP CMPI1 CMPD1

CMPB CMPI2 CMPD2

Data Sheet
2001-02-23

C165UTAH

Boolean Bit Manipulation Instructions
• Manipulation of a maskable bit field in either the high or the low byte of a word:
• Setting a single bit to ‘1’
• Clearing a single bit to ‘0’
• Movement of a single bit
• Movement of a negated bit
• ANDing of two bits
• ORing of two bits
• XORing of two bits
• Comparison of two bits:

Instruction Set Summary

BFLDH BSET BCLR BMOV BMOVN BAND BOR BXOR BCMP

BFLDL

Shift and Rotate Instructions
• Shifting right of a word:
• Shifting left of a word:
• Rotating right of a word:
• Rotating left of a word:
• Arithmetic shifting right of a word sign bit shifting ASHR

Prioritize Instruction
• Determination of the number of shift cycles required to normalize a word operand floating point support :

PRIOR

Data Movement Instructions
• Standard data movement of a word or byte
• Data movement of a byte to a word location
with either sign or zero byte extension:

MOV MOVBS

MOVB MOVBZ

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SAF-C165UTAH-LFV1.3 Datasheet file may be downloaded here without warranties.

Datasheet ID: SAF-C165UTAH-LFV1.3 637978