MIKROE-2539

MIKROE-2539 Datasheet

PID MIKROE-2539 Weight 30 g

Part	Datasheet
MIKROE-2539	MIKROE-2539 (pdf)

PDF Datasheet Preview
Grid-EYE click PID MIKROE-2539 Weight 30 g Grid-EYE click is a 8x8 thermal array sensor-detector that carries the AMG8853 infrared array sensor from Panasonic. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over I2C interface. Use the Grid-EYE click to detect absolute surface temperature without any contact. Or use it to detect the movement of people and objects. Take a look at how Panasonic's AMG8853 64 thermal sensors see a moving hand: AMG8853 sensor features The AMG8853 is made out of 64 individual thermal sensors. It can build an image according to the heat it detects. You don’t need light to form a picture. The temperature measuring range is from -20°C to +100°C. The detecting distance is 5m, the viewing angle 60 degrees. The AMG8853 has a built-in thermistor for suppressing ambient temperature noise. The I2C levels and address are jumper selectable, while the AMG8853 is supplied with designated voltage. Infrared sensor Infrared waves are outside the visible spectrum of the human eye, just like radio waves. Even though people can’t see infrared waves, they can certainly feel them, in the form of heat. Our bodies emit heat or infrared radiation, and the AMG8853 thermal array sensor can detect it. Key features • AMG8853 infrared array sensor o 5m detecting distance o 60 degrees viewing angle o 0.25°C temperature resolution o Typical current consumption 4.5mA o Time to stabilize the output 15 seconds o Frame rate 1f/sec or 10f/sec • I2C interface • 3.3V or 5V power supply Product Type Temperature / Humidity Applications Thermal imaging systems, detecting movement of people and objects, etc AMG8853 thermal array sensor from Panasonic Key Features 5 m detecting distance, 60 degrees viewing angle, 64 individual thermal sensors Key Benefits Detect absolute surface temperature without any contact Interface Power Supply 3.3V or 5V Compatibility mikroBUS Click board size M x mm Pinout diagram This table shows how the pinout on Grid-EYE click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes mikroBUStm Notes Not connected NC 1 AN PWM 16 NC Not connected Not connected NC 2 RST INT 15 INT out to MCU Not connected NC 3 CS TX 14 NC Not connected Not connected NC 4 SCK RX 13 NC Not connected Not connected NC 5 MISO SCL 12 SCL I2C SCK Not connected NC 6 MOSI SDA 11 SDA I2C data Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND 9 GND Ground Jumpers and settings Designator Name Default Position Default Option

PDF Datasheet Preview

Grid-EYE click

PID MIKROE-2539 Weight 30 g

Grid-EYE click is a 8x8 thermal array sensor-detector that carries the AMG8853 infrared array sensor from Panasonic. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over I2C interface. Use the Grid-EYE click to detect absolute surface temperature without any contact. Or use it to detect the movement of people and objects. Take a look at how Panasonic's AMG8853 64 thermal sensors see a moving hand:

AMG8853 sensor features

The AMG8853 is made out of 64 individual thermal sensors. It can build an image according to the heat it detects. You don’t need light to form a picture.

The temperature measuring range is from -20°C to +100°C.

The detecting distance is 5m, the viewing angle 60 degrees.

The AMG8853 has a built-in thermistor for suppressing ambient temperature noise.

The I2C levels and address are jumper selectable, while the AMG8853 is supplied with designated voltage.

Infrared sensor

Infrared waves are outside the visible spectrum of the human eye, just like radio waves. Even though people can’t see infrared waves, they can certainly feel them, in the form of heat.

Our bodies emit heat or infrared radiation, and the AMG8853 thermal array sensor can detect it.

Key features
• AMG8853 infrared array sensor o 5m detecting distance o 60 degrees viewing angle o 0.25°C temperature resolution o Typical current consumption 4.5mA o Time to stabilize the output 15 seconds o Frame rate 1f/sec or 10f/sec
• I2C interface
• 3.3V or 5V power supply

Product Type Temperature / Humidity

Applications Thermal imaging systems, detecting movement of people and objects, etc

AMG8853 thermal array sensor from Panasonic

Key Features 5 m detecting distance, 60 degrees viewing angle, 64 individual thermal sensors

Key Benefits Detect absolute surface temperature without any contact

Interface

Power Supply 3.3V or 5V

Compatibility mikroBUS

Click board size M x mm

Pinout diagram

This table shows how the pinout on Grid-EYE click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns .

Notes
mikroBUStm

Notes

Not connected NC 1 AN PWM 16 NC Not connected

Not connected NC 2 RST INT 15 INT out to MCU

Not connected NC 3 CS TX 14 NC Not connected

Not connected NC 4 SCK RX 13 NC Not connected

Not connected NC 5 MISO SCL 12 SCL I2C SCK

Not connected NC 6 MOSI SDA 11 SDA I2C data

Power supply +3.3V 7 3.3V 5V 10 +5V Power supply

Ground GND 8 GND 9 GND Ground

Jumpers and settings

Designator Name

Default Position

Default Option

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2539 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2539 649367