BTS5236-2EKA
BTS5236-2EKA Datasheet
BTS5236-2EKA
| Part | Datasheet |
|---|---|
BTS5236-2EKA |
BTS5236-2EKA (pdf) |
| PDF Datasheet Preview |
|---|
| BTS5236-2EKA Smart High-Side Power Switch PROFET Two Channels, 50 mΩ Automotive Power Smart High-Side Power Switch BTS5236-2EKA Table of Contents 1 Overview 5 Block Diagram 5 Terms 6 2 Pin Configuration 7 Pin Assignment BTS5236-2EKA 7 Pin Definitions and Functions 7 3 Electrical Characteristics 8 Maximum Ratings 8 5 Package Outlines BTS5236-2EKA 25 Datasheet Smart High-Side Power Switch PROFET BTS5236-2EKA Product Summary The BTS5236-2EKA is a dual channel high-side power switch in exposed pad PG-DSO-14-33 package providing embedded protective functions. The power transistor is built by a N-channel vertical power MOSFET with charge pump. The device is monolithically integrated in Smart SIPMOS technology. Basic Features PG-DSO-14-33 • Very low standby current • V and 5 V compatible logic pins • Improved electromagnetic compatibility EMC • Stable behavior at under voltage • Logic ground independent from load ground • Secure load turn-off while logic ground disconnected • Optimized inverse current capability • Green Product RoHS Compliant • AEC Qualified • Exposed pad power package Operating voltage Over voltage protection On-State resistance Nominal load current one channel active Current limitation Current limitation repetitive Standby current for whole device with load 1 Ambient value referred to maximum RDS ON at 150°C Vbb on Vbb AZ RDS ON IL nom IL LIM IL SCr Ibb OFF 28 V 41 V 50 mΩ1 A 23 A 6A uA Type BTS5236-2EKA Datasheet Package PG-DSO-14-33 Marking BTS5236-2EK Smart High-Side Power Switch BTS5236-2EKA Protective Functions Diagnostic Functions • Enhanced IntelliSense signal for each channel • Enable function for diagnosis pins IS1and IS2 • Proportional load current sense signal by current source • High accuracy of current sense signal at wide load current range • Open load detection in ON-state by load current sense • Over load current limitation diagnosis in ON-state, signalling by voltage source • Latched over temperature diagnosis in ON-state, signalling by voltage source • Open load detection in OFF-state, signalling by voltage source • uC compatible high-side power switch with diagnostic feedback for 12 V grounded loads • Suitable for automotive and industrial applications • Suitable for resistive, inductive and capacitive loads • Suitable for loads with high inrush currents, such as lamps • Suitable for loads with low currents, such as LEDs • Replaces electromechanical relays, fuses and discrete circuits Datasheet Smart High-Side Power Switch BTS5236-2EKA Overview |
| More datasheets: HS-4100-0345 | HS-543R-0537 | HS-5410-0537 | HS-5430-0537 | HS-5200-0493 | HS-5100-0346 | NT-52D1-0430 | NT-52D0-0429 | MDM-51PH003F | HRF3205 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS5236-2EKA Datasheet file may be downloaded here without warranties.