BTS410F2 E3062A
BTS410F2 E3062A Datasheet
BTS410F2
| Part | Datasheet |
|---|---|
BTS410F2 E3062A |
BTS410F2 E3062A (pdf) |
| PDF Datasheet Preview |
|---|
| Smart High-Side Power Switch BTS410F2 auto-restart and hysteresis • Open drain diagnostic output • Open load detection in ON-state • CMOS compatible input • Loss of ground and loss of Vbb protection • Electrostatic discharge ESD protection • Green Product RoHS compliant • AEC Qualified Product Summary Overvoltage protection Operating voltage On-state resistance Load current ISO Current limitation Vbb AZ Vbb on RON IL ISO IL SCr 65 V 42 V 220 A PG-TO263-5-2 Application • compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads • Most suitable for inductive loads • Replaces electromechanical relays, fuses and discrete circuits N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Providing embedded protective functions. Voltage source V Logic Voltage sensor ESD 4 ST Logic Overvoltage protection Current limit Gate protection + V bb 3 Charge pump Level shifter Rectifier Limit for unclamped ind. loads Open load detection 5 Temperature sensor Load Short circuit detection Signal GND PROFET Load GND Data Sheet 2013-10-15 BTS410F2 Function - Logic ground I Input, activates the power switch in case of logical high signal + Positive power supply voltage, the tab is shorted to this pin S Diagnostic feedback, low on failure O Output to the load Load, L Package and Ordering Code All dimensions in mm PG-TO263-5-2 BTS410F2 E3062A Ordering code SP001104818 Published by Infineon Technologies AG, D-81726 München Infineon Technologies AG 2013 All Rights Reserved. BTS410F2 Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet 2013-10-15 |
| More datasheets: 641C | 640B | 640C | 641B | 641A | 640A | LSHD-7801 | 1.5KE210C | 1.5KE210 | CA3102R16S-4SXF80 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS410F2E3062A Datasheet file may be downloaded here without warranties.