1.5KE210

1.5KE210 Datasheet

RoHS 1.5KE Series

Part	Datasheet
1.5KE210	1.5KE210 (pdf)

Related Parts	Information
1.5KE210C	1.5KE210C

PDF Datasheet Preview
Silicon Avalanche Diodes 1500 Watt Axial Leaded Transient Voltage Suppressors RoHS 1.5KE Series The 1.5KE Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and other transient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. • RoHS Compliant • 6.8V to 550Volts • Uni-directional and Bi-directional • Glass passivated chip junction in DO-201 package • 1500W surge capability at 10/1000µs wave form • Excellent clamping capability • Low zener impedance to BV min. • Typical IR less than 1µA above 10V, 9.5mm lead length, 5lbs., 2.3kg tension Agency Approvals Recognized under the Components Program of Underwriters Laboratories. Agency File Number E128662 MAXIMUM RATINGS AND CHARACTERISTICS AMBIENT TEMPERATURE unless otherwise noted RATING Peak Pulse Power Dissipation at TP=1ms Note 1 Steady State Power Dissipation at Lead lengths 9.5mm Note 2 Superimposed on Rated Load, JEDEC Method Note 3 Operating junction and Storage Temperature Range SYMBOL PPPM VALUE Min 1500 UNIT Watts PM AV Watts IFSM Amps Tj, TSTG -55 to +175 °C Non-repetitive current pulse, per Fig.3 and derated above TA= per Fig.2 ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. ORDERING INFORMATION 1.5KE Voltage Bi-Directional 5% Voltage Tolerance Packaging Option B = Bulk 500 pcs T = Tape and reeled 1200 pcs Mechanical Specifications: Weight: ounce, grams Case: JEDEC DO-201 Molded plastic Mounting Position Any Polarity: Color band denotes cathode except Bipolar Terminal: Axial leads, solderable per MIL-STD-750, Method 2026 Silicon Avalanche Diodes 1500 Watt Axial Leaded Transient Voltage Suppressors RoHS 1.5KE Series ELECTRICAL SPECIFICATION Tamb 25°C Part Numbers Uni-Polar 1.5KE6.8A 1.5KE7.5A 1.5KE8.2A 1.5KE9.1A 1.5KE10A 1.5KE11A 1.5KE12A 1.5KE13A 1.5KE15A 1.5KE16A 1.5KE18A 1.5KE20A 1.5KE22A 1.5KE24A 1.5KE27A 1.5KE30A 1.5KE33A 1.5KE36A 1.5KE39A 1.5KE43A 1.5KE47A 1.5KE51A 1.5KE56A 1.5KE62A 1.5KE68A 1.5KE75A 1.5KE82A 1.5KE91A 1.5KE100A 1.5KE110A 1.5KE120A 1.5KE130A 1.5KE150A 1.5KE160A 1.5KE170A 1.5KE180A 1.5KE200A 1.5KE220A 1.5KE250A 1.5KE300A 1.5KE350A 1.5KE400A 1.5KE440A 1.5KE480A 1.5KE510A 1.5KE530A 1.5KE540A 1.5KE550A Bi-Polar 1.5KE6.8CA 1.5KE7.5CA 1.5KE8.2CA 1.5KE9.1CA 1.5KE10CA 1.5KE11CA 1.5KE12CA 1.5KE13CA 1.5KE15CA 1.5KE16CA 1.5KE18CA 1.5KE20CA 1.5KE22CA 1.5KE24CA 1.5KE27CA 1.5KE30CA 1.5KE33CA 1.5KE36CA 1.5KE39CA 1.5KE43CA 1.5KE47CA 1.5KE51CA 1.5KE56CA 1.5KE62CA 1.5KE68CA 1.5KE75CA 1.5KE82CA 1.5KE91CA 1.5KE100CA 1.5KE110CA 1.5KE120CA 1.5KE130CA 1.5KE150CA 1.5KE160CA 1.5KE170CA 1.5KE180CA 1.5KE200CA 1.5KE220CA 1.5KE250CA 1.5KE300CA 1.5KE350CA 1.5KE400CA 1.5KE440CA 1.5KE480CA 1.5KE510CA 1.5KE530CA 1.5KE540CA 1.5KE550CA VR Volts Breakdown Voltage VBR Volts IT Test Current IT mA MIN MAX Maximum Clamping Voltage VC IPP Volts Maximum Peak Pulse Current IPP A For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% 1000 500 200 50 10 5 SILICON DIODE ARRAYS Silicon Avalanche Diodes 1500 Watt Axial Leaded Transient Voltage Suppressors

PDF Datasheet Preview

Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors

RoHS 1.5KE Series

The 1.5KE Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and other transient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.
• RoHS Compliant
• 6.8V to 550Volts
• Uni-directional and Bi-directional
• Glass passivated chip junction in DO-201 package
• 1500W surge capability at 10/1000µs wave form
• Excellent clamping capability
• Low zener impedance to BV min.
• Typical IR less than 1µA above 10V, 9.5mm lead length,
5lbs., 2.3kg tension

Agency Approvals Recognized under the Components

Program of Underwriters Laboratories.

Agency File Number E128662

MAXIMUM RATINGS AND CHARACTERISTICS AMBIENT TEMPERATURE unless otherwise noted

RATING

Peak Pulse Power Dissipation at TP=1ms Note 1

Steady State Power Dissipation at Lead lengths 9.5mm Note 2

Superimposed on Rated Load, JEDEC Method Note 3

Operating junction and Storage Temperature Range

SYMBOL PPPM

VALUE

Min 1500

UNIT Watts

PM AV

Watts

IFSM

Amps

Tj, TSTG -55 to +175 °C

Non-repetitive current pulse, per Fig.3 and derated above TA= per Fig.2
ms single half sine-wave, or equivalent square wave, Duty
cycle= 4 pulses per minutes maximum.
ORDERING INFORMATION
1.5KE

Voltage

Bi-Directional
5% Voltage Tolerance Packaging Option

B = Bulk 500 pcs T = Tape and reeled 1200 pcs

Mechanical Specifications:

Weight:
ounce, grams

Case:

JEDEC DO-201 Molded plastic

Mounting Position Any

Polarity:

Color band denotes cathode
except Bipolar

Terminal:

Axial leads, solderable per MIL-STD-750,

Method 2026

Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors

RoHS 1.5KE Series

ELECTRICAL SPECIFICATION Tamb 25°C

Part Numbers

Uni-Polar
1.5KE6.8A 1.5KE7.5A 1.5KE8.2A 1.5KE9.1A 1.5KE10A 1.5KE11A 1.5KE12A 1.5KE13A 1.5KE15A 1.5KE16A 1.5KE18A 1.5KE20A 1.5KE22A 1.5KE24A 1.5KE27A 1.5KE30A 1.5KE33A 1.5KE36A 1.5KE39A 1.5KE43A 1.5KE47A 1.5KE51A 1.5KE56A 1.5KE62A 1.5KE68A 1.5KE75A 1.5KE82A 1.5KE91A 1.5KE100A 1.5KE110A 1.5KE120A 1.5KE130A 1.5KE150A 1.5KE160A 1.5KE170A 1.5KE180A 1.5KE200A 1.5KE220A 1.5KE250A 1.5KE300A 1.5KE350A 1.5KE400A 1.5KE440A 1.5KE480A 1.5KE510A 1.5KE530A 1.5KE540A 1.5KE550A

Bi-Polar
1.5KE6.8CA 1.5KE7.5CA 1.5KE8.2CA 1.5KE9.1CA 1.5KE10CA 1.5KE11CA 1.5KE12CA 1.5KE13CA 1.5KE15CA 1.5KE16CA 1.5KE18CA 1.5KE20CA 1.5KE22CA 1.5KE24CA 1.5KE27CA 1.5KE30CA 1.5KE33CA 1.5KE36CA 1.5KE39CA 1.5KE43CA 1.5KE47CA 1.5KE51CA 1.5KE56CA 1.5KE62CA 1.5KE68CA 1.5KE75CA 1.5KE82CA 1.5KE91CA 1.5KE100CA 1.5KE110CA 1.5KE120CA 1.5KE130CA 1.5KE150CA 1.5KE160CA 1.5KE170CA 1.5KE180CA 1.5KE200CA 1.5KE220CA 1.5KE250CA 1.5KE300CA 1.5KE350CA 1.5KE400CA 1.5KE440CA 1.5KE480CA 1.5KE510CA 1.5KE530CA 1.5KE540CA 1.5KE550CA

VR Volts

Breakdown Voltage

VBR Volts IT

Test Current IT mA

MIN MAX

Maximum Clamping Voltage VC IPP

Volts

Maximum Peak Pulse

Current IPP A

For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10%
1000 500 200 50 10 5

SILICON DIODE ARRAYS

Silicon Avalanche Diodes
1500 Watt Axial Leaded Transient Voltage Suppressors

More datasheets: DDME-50S | 30-6019 | 641C | 640B | 640C | 641B | 641A | 640A | LSHD-7801 | 1.5KE210C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1.5KE210 Datasheet file may be downloaded here without warranties.

Datasheet ID: 1.5KE210 646344