BTS282Z E3180A

BTS282Z E3180A Datasheet

BTS 282 Z

Part	Datasheet
BTS282Z E3180A	BTS282Z E3180A (pdf)

Related Parts	Information
BTS282ZAKSA1	BTS282ZAKSA1
BTS282Z E3230	BTS282Z E3230

PDF Datasheet Preview
BTS 282 Z Speed N-Channel Enhancement mode Logic Level Input Analog driving possible Fast switching up to 1 MHz VPT05754 Potential-free temperature sensor with thyristor characteristics Overtemperature protection Avalanche rated High current pinning Type BTS 282 Z VDS 49 V RDS on Package P-TO220-7-3 P-TO220-7-180 P-TO220-7-230 Ordering Code Q67060-S6004-A2 Q67060-S6005-A2 Q67060-S6007 D Pin 4 and TAB VPT05167 G Pin 2 A Pin 3 Temperature Sensor K Pin 5 S Pin 1 + 6 + 7 Symbol Function Source Gate Anode Temperature Sensor Drain Cathode Temperature Sensor Source Source 2000-09-11 Maximum Ratings Parameter Drain source voltage Drain-gate voltage, RGS = 20 k Gate source voltage Nominal load current ISO 10483 VGS = V, VDS V, TC = 85 °C VGS = 10 V, VDS V, TC = 85 °C Continuous drain current 1 TC = 100 °C, VGS = 4.5V Pulsed drain current Avalanche energy, single pulse ID = 36 A, RGS = 25 Power dissipation TC = 25 °C Operating temperature 2 Peak temperature single event Storage temperature DIN humidity category, DIN 40 040 IEC climatic category DIN IEC 68-1 BTS 282 Z Symbol VDS VGS ID ISO ID puls EAS Ptot Tj Tjpeak Tstg Value Unit A 36 52 -55 +150 40/150/56 1current limited by bond wire 2Note Thermal trip temperature of temperature sensor is below 175°C 2000-09-11 Thermal Characteristics Parameter Characteristics junction - case Thermal resistance min. footprint Thermal resistance 6 cm2 cooling area 1 Ordering Code Q67060-S6004-A2 Package P-TO220-7-180 Ordering Code Q67060-S6005-A2 6 x = 1 shear and punch direction no burrs this surface GPT05167 1 Shear and punch direction no burrs this surface Back side, heatsink contour All metal surfaces tin plated, except area of cut Package P-TO220-7-230 Ordering Code Q67060-S6007 2000-09-11 BTS 282 Z Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 2000-09-11

PDF Datasheet Preview

BTS 282 Z

Speed N-Channel

Enhancement mode

Logic Level Input

Analog driving possible Fast switching up to 1 MHz

VPT05754

Potential-free temperature sensor with thyristor characteristics

Overtemperature protection Avalanche rated High current pinning

Type BTS 282 Z

VDS 49 V

RDS on

Package P-TO220-7-3 P-TO220-7-180 P-TO220-7-230
Ordering Code Q67060-S6004-A2 Q67060-S6005-A2 Q67060-S6007

D Pin 4 and TAB

VPT05167

G Pin 2 A Pin 3

Temperature Sensor

K Pin 5

S Pin 1 + 6 + 7

Symbol Function

Source

Gate

Anode Temperature Sensor

Drain

Cathode Temperature Sensor

Source

Source
2000-09-11

Maximum Ratings Parameter

Drain source voltage

Drain-gate voltage, RGS = 20 k

Gate source voltage Nominal load current ISO 10483

VGS = V, VDS V, TC = 85 °C VGS = 10 V, VDS V, TC = 85 °C

Continuous drain current 1 TC = 100 °C, VGS = 4.5V Pulsed drain current Avalanche energy, single pulse

ID = 36 A, RGS = 25

Power dissipation TC = 25 °C Operating temperature 2 Peak temperature single event

Storage temperature

DIN humidity category, DIN 40 040 IEC climatic category DIN IEC 68-1

BTS 282 Z

Symbol VDS

VGS ID ISO

ID puls EAS

Ptot

Tj Tjpeak Tstg

Value

Unit

A 36 52
-55 +150
40/150/56
1current limited by bond wire 2Note Thermal trip temperature of temperature sensor is below 175°C
2000-09-11

Thermal Characteristics Parameter

Characteristics junction - case Thermal resistance min. footprint Thermal resistance 6 cm2 cooling area 1
Ordering Code Q67060-S6004-A2

Package P-TO220-7-180
Ordering Code Q67060-S6005-A2
6 x = 1 shear and punch direction no burrs this surface

GPT05167
1 Shear and punch direction no burrs this surface Back side, heatsink contour All metal surfaces tin plated, except area of cut

Package P-TO220-7-230
Ordering Code Q67060-S6007
2000-09-11

BTS 282 Z

Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
2000-09-11

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS282ZE3180A Datasheet file may be downloaded here without warranties.

Datasheet ID: BTS282ZE3180A 637892