BGM781N11E6327XUSA1
BGM781N11E6327XUSA1 Datasheet
BGM781N11
| Part | Datasheet |
|---|---|
BGM781N11E6327XUSA1 |
BGM781N11E6327XUSA1 (pdf) |
| PDF Datasheet Preview |
|---|
| BGM781N11 GPS Front-End Module RF & Protection Devices Edition 2010-10-28 Published by Infineon Technologies AG 81726 München, Germany Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Oct. 2010 Package pin tolerances changed from 35µm to 50µm BGM781N11 Data Sheet GPS Front-End Module BGM781N11 GPS Front-End Module Features • Operating frequency MHz • High Gain dB • Low Noise Figure dB • Low current consumption mA • Out-of-band rejection in cellular bands 80 dBc • Input compression point in cellular bands 20 dBm • Supply voltage V to V • Tiny TSNP-11-2 leadless package • RF input internally pre-matched to 50 Ω • RF output internally matched to 50 Ω • HBM ESD capability of all pins 2 kV • IEC ESD contact discharge of RF input pin 8 kV • Only 2 external SMD parts • RoHS compliant package Pb-free Application • MHz GPS, Galileo, GPS phones, personal navigaton devices TSNP11-2.vsd TSNP-11-2 Package top view x RFIN BIAS Pre-Filter BIAS Post-Filter BGM781N11 Figure 1 Blockdiagram with main external components BGM781_Blockdiagram_with_external.vsd Data Sheet BGM781N11 The BGM781N11 is a combination of a low-insertion-loss pre-filter with Infineon’s high performance low noise amplifier LNA and a high-attenuation post-filter for Global Positioning System GPS applications. Through the low insertion loss of the filters, the BGM781N11 provides dB gain, dB noise figure and high linearity performance. In addition BGM781N11 provides very high out-of-band attenuation in conjunction with a high input compression point. Its current consumption is as low as mA. It operates over the V to V supply voltage range. Type BGM781N11 Pin Definition and Function Package TSNP-11-2 Table 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 Pin Definition and Function Symbol BG2 PON VCC n.c. RFIN BG1 BO1 AI BIAS RFOUT GND Maximum Ratings |
| More datasheets: 275G-22LF | 275G-22LFT | DCMZ-37P-N-K127 | 83904AGI-02LF | 83904AGI-02LFT | DDMAE50PK87 | DAMC-7H2P-J-K127 | SPU0414HR5H-SB-7 | DBMM-25S-E | MDM-21PH048M3 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BGM781N11E6327XUSA1 Datasheet file may be downloaded here without warranties.