AUIPS6041R

AUIPS6041R Datasheet


AUIPS6041 G R S

Part Datasheet
AUIPS6041R AUIPS6041R AUIPS6041R (pdf)
Related Parts Information
AUIPS6041G AUIPS6041G AUIPS6041G
AUIPS6041S AUIPS6041S AUIPS6041S
AUIPS6041 AUIPS6041 AUIPS6041
AUIPS6041RTRL AUIPS6041RTRL AUIPS6041RTRL
AUIPS6041STRL AUIPS6041STRL AUIPS6041STRL
PDF Datasheet Preview
March, 12th 2012

Automotive grade

AUIPS6041 G R S

INTELLIGENT POWER HIGH SIDE SWITCH

Product Summary

Rds on Vclamp I Limit Open load
max. 39V 7A 3V / 0.22A

Packages

SO8 AUIPS6041G

D-Pak AUIPS6041R

TO220 AUIPS6041

D2Pak AUIPS6041S

Typical Connection
+Bat

Rdgp Dg 3

Rdgs

Vcc 5-6-7-8 Control

V Diag Input Signal

In 2 Gnd 1 Rin

Out 4 Load

Pull-up resistors required for open load off and short circuit to Vbat detection

AUIPS6041 G R S

Qualification Information†

Qualification Level

Moisture Sensitivity Level

Machine Model

Human Body Model

Charged Device Model SOIC, DPAK,D2PAK Charged Device Model TO220

IC Latch-Up Test

Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level.

D2PAK-5L

MSL1, 260°C per IPC/JEDEC J-STD-020

TO-220

Not applicable non-surface mount package style

DPAK-5L

MSL1, 260°C per IPC/JEDEC J-STD-020

SOIC-8L

MSL2, 260°C per IPC/JEDEC J-STD-020

Class M2 +/-150V ††† per AEC-Q100-003 Class H1C +/-1500V ††† per AEC-Q100-002 Class C4 +/-900V ††† per AEC-Q100-011 Class C3B +/-750V ††† per AEC-Q100-011

Class II, Level A per AEC-Q100-004
† Qualification standards can be found at International Rectifier’s web site †† Exceptions to AEC-Q100 requirements are noted in the qualification report. ††† Passing voltage level
Ordering Information

Base Part Number Package Type

AUIPS6041

TO220-5-Leads

AUIPS6041S

D2-Pak-5-Leads

AUIPS6041R

D-Pak-5-Leads

AUIPS6041G

SOIC-8

Standard Pack

Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right Tube Tape and reel

Quantity 50 800 75
2000 3000
95 2500

Complete Part Number

AUIPS6041 AUIPS6041S AUIPS6041STRL AUIPS6041STRR AUIPS6041R AUIPS6041RTR AUIPS6041RTRL AUIPS6041RTRR AUIPS6041G AUIPS6041GTR

AUIPS6041 G R S

IMPORTANT NOTICE

Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.

IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.

Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.

IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.

IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.

For technical support, please contact IR’s Technical Assistance Center

WORLD HEADQUARTERS 101 N Sepulbeda Blvd., El Segundo, California 90245

Tel 310 252-7105

AUIPS6041 G R S

Februrary, 28th 2009

March, 14th 2011

May 15, 2012

Notes/Changes

AU number update AU release Add the test condition for the ICC off parameters
More datasheets: 6CWQ03FNTRR | 6CWQ03FNTR | 6CWQ03FNTRL | 6CWQ03FN | 23712RB | C13226_DOROTHY-4-A | IPP06CN10LGXKSA1 | BFS 466L6 E6327 | NX2837CUPTR | AUIPS6041G


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AUIPS6041R Datasheet file may be downloaded here without warranties.

Datasheet ID: AUIPS6041R 637607