AUIPS6031R

AUIPS6031R Datasheet

AUIPS6031 S R

Part	Datasheet
AUIPS6031R	AUIPS6031R (pdf)

Related Parts	Information
AUIPS6031	AUIPS6031
AUIPS6031S	AUIPS6031S
AUIPS6031STRL	AUIPS6031STRL

PDF Datasheet Preview
September, 12th 2011 Automotive grade Done please find AUIPS6031 S R INTELLIGENT POWER HIGH SIDE SWITCH Typical Connection Product Summary Rds on Vclamp I Limit Open load max. 39V 16A 3V / 0.55A Packages TO-220 D-Pak AUIPS6031 AUIPS6031S AUIPS6031R Rdgp Dg 4 Rdgs Control V Diag Input Signal In 2 Gnd 1 Rin +Bat Vcc 3 Out 5 Load Pull-up resistors required for open load off and short circuit to Vbat detection AUIPS6031 S R Qualification Information† Qualification Level Moisture Sensitivity Level Machine Model Human Body Model Charged Device Model DPAK,D2PAK Charged Device Model TO220 IC Latch-Up Test Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. D2PAK-5L MSL1, 260°C per IPC/JEDEC J-STD-020 TO-220 Not applicable non-surface mount package style DPAK-5L MSL1, 260°C per IPC/JEDEC J-STD-020 Class M2 +/-150V ††† per AEC-Q100-003 Class H1C +/-1500V ††† per AEC-Q100-002 Class C4 +/-900V ††† per AEC-Q100-011 Class C3B +/-750V ††† per AEC-Q100-011 Class II, Level A per AEC-Q100-004 † Qualification standards can be found at International Rectifier’s web site †† Exceptions to AEC-Q100 requirements are noted in the qualification report. ††† Passing voltage level AUIPS6031 S R Absolute Maximum Ratings Ordering Information Base Part Number Package Type AUIPS6031 TO220-5-Leads AUIPS6031S D2-Pak-5-Leads AUIPS6031R D-Pak-5-Leads Standard Pack Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right Quantity 50 800 75 2000 3000 Complete Part Number AUIPS6031 AUIPS6031S AUIPS6031STRL AUIPS6031STRR AUIPS6031R AUIPS6031RTR AUIPS6031RTRL AUIPS6031RTRR AUIPS6031 S R IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center WORLD HEADQUARTERS 101 N Sepulbeda Blvd., El Segundo, California 90245 Tel 310 252-7105 AUIPS6031 S R September, 12th 2011 May 15, 2012 Notes/Changes AU release Add the test condition for the ICC off parameters

PDF Datasheet Preview

September, 12th 2011

Automotive grade

Done please find

AUIPS6031 S R

INTELLIGENT POWER HIGH SIDE SWITCH

Typical Connection

Product Summary

Rds on Vclamp I Limit Open load
max. 39V 16A 3V / 0.55A

Packages

TO-220

D-Pak

AUIPS6031 AUIPS6031S AUIPS6031R

Rdgp Dg 4

Rdgs

Control

V Diag Input Signal

In 2 Gnd 1 Rin
+Bat Vcc 3

Out 5 Load

Pull-up resistors required for open load off and short circuit to Vbat detection

AUIPS6031 S R

Qualification Information†

Qualification Level

Moisture Sensitivity Level

Machine Model

Human Body Model

Charged Device Model DPAK,D2PAK Charged Device Model TO220

IC Latch-Up Test

Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level.

D2PAK-5L

MSL1, 260°C per IPC/JEDEC J-STD-020

TO-220

Not applicable non-surface mount package style

DPAK-5L

MSL1, 260°C per IPC/JEDEC J-STD-020

Class M2 +/-150V ††† per AEC-Q100-003 Class H1C +/-1500V ††† per AEC-Q100-002 Class C4 +/-900V ††† per AEC-Q100-011 Class C3B +/-750V ††† per AEC-Q100-011

Class II, Level A per AEC-Q100-004
† Qualification standards can be found at International Rectifier’s web site †† Exceptions to AEC-Q100 requirements are noted in the qualification report. ††† Passing voltage level

AUIPS6031 S R

Absolute Maximum Ratings
Ordering Information

Base Part Number Package Type

AUIPS6031

TO220-5-Leads

AUIPS6031S

D2-Pak-5-Leads

AUIPS6031R

D-Pak-5-Leads

Standard Pack

Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right

Quantity 50 800 75
2000 3000

Complete Part Number

AUIPS6031 AUIPS6031S AUIPS6031STRL AUIPS6031STRR AUIPS6031R AUIPS6031RTR AUIPS6031RTRL AUIPS6031RTRR

AUIPS6031 S R

IMPORTANT NOTICE

Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.

IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.

Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.

IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.

IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.

For technical support, please contact IR’s Technical Assistance Center

WORLD HEADQUARTERS 101 N Sepulbeda Blvd., El Segundo, California 90245

Tel 310 252-7105

AUIPS6031 S R

September, 12th 2011

May 15, 2012

Notes/Changes

AU release Add the test condition for the ICC off parameters

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AUIPS6031R Datasheet file may be downloaded here without warranties.

Datasheet ID: AUIPS6031R 637606