SDP8314-301

SDP8314-301 Datasheet

SDP8304/8314

Part	Datasheet
SDP8314-301	SDP8314-301 (pdf)

Related Parts	Information
SDP8304-301	SDP8304-301

PDF Datasheet Preview
SDP8304/8314 Optoschmitt Detector Open-Collector Output FEATURES • Side-looking plastic package • nominal acceptance angle • TTL/LSTTL/CMOS compatible • Open collector output • Buffer SDP8304 or inverting SDP8314 logic available • High noise immunity output • Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes DESCRIPTION The SDP8304/8314 series consists of a high speed IC molded in a side-looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The output stage is an open collector NPN transistor. This configuration allows the sensor to interface with circuit elements driven by supply voltages other than the VÙÙ supply. For additional output configuration options refer to SDP8004/8014 and SDP8604/8614. Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level. INFRA--8.TIF OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals 2 plc decimals SQ. 3 PLCS ~~~ GN~D V~o V~cc DIM_026.ds4 Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8304/8314 Optoschmitt Detector Open-Collector Output ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS ABSOLUTE MAXIMUM RATINGS Free-Air Temperature unless otherwise noted Supply Voltage 12 V [À] Duration of Output Short to VÙÙ or Ground Applied Output Voltage Low Level Output Current 16 mA Irradiance Operating Temperature Range Storage Temperature Range Soldering Temperature 5 sec Notes Derate linearly from to V at SCHEMATIC Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8304/8314 Optoschmitt Detector Open-Collector Output SCHEMATIC SCH_019.cdr SWITCHING TIME TEST CIRCUIT cir_007.cdr

PDF Datasheet Preview

SDP8304/8314

Optoschmitt Detector Open-Collector Output

FEATURES
• Side-looking plastic package
• nominal acceptance angle
• TTL/LSTTL/CMOS compatible
• Open collector output
• Buffer SDP8304 or inverting SDP8314 logic
available
• High noise immunity output
• Mechanically and spectrally matched to

SEP8506 and SEP8706 infrared emitting diodes

DESCRIPTION The SDP8304/8314 series consists of a high speed IC molded in a side-looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The output stage is an open collector NPN transistor. This configuration allows the sensor to interface with circuit elements driven by supply voltages other than the VÙÙ supply. For additional output configuration options refer to SDP8004/8014 and SDP8604/8614.

Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.

INFRA--8.TIF

OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals
2 plc decimals

SQ. 3 PLCS
~~~ GN~D V~o V~cc

DIM_026.ds4

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SDP8304/8314

Optoschmitt Detector Open-Collector Output

ELECTRICAL CHARACTERISTICS PARAMETER

SYMBOL MIN TYP MAX UNITS

TEST CONDITIONS

ABSOLUTE MAXIMUM RATINGS

Free-Air Temperature unless otherwise noted

Supply Voltage
12 V [À]

Duration of Output

Short to VÙÙ or Ground

Applied Output Voltage

Low Level Output Current
16 mA

Irradiance

Operating Temperature Range

Storage Temperature Range

Soldering Temperature 5 sec

Notes Derate linearly from to V at

SCHEMATIC

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SDP8304/8314

Optoschmitt Detector Open-Collector Output

SCHEMATIC

SCH_019.cdr

SWITCHING TIME TEST CIRCUIT
cir_007.cdr

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SDP8314-301 Datasheet file may be downloaded here without warranties.

Datasheet ID: SDP8314-301 636520