SDP8004-301

SDP8004-301 Datasheet

SDP8004/8014

Part	Datasheet
SDP8004-301	SDP8004-301 (pdf)

Related Parts	Information
SDP8014-301	SDP8014-301

PDF Datasheet Preview
SDP8004/8014 Optoschmitt Detector Totem-Pole Output FEATURES • Side-looking plastic package • nominal acceptance angle • TTL/LSTTL/CMOS compatible • Totem- pole output • Buffer SDP8004 or inverting SDP8014 logic available • High noise immunity output • Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes DESCRIPTION The SDP8004/8014 series consists of a high speed IC molded in a side- looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. The totem- pole output is well- suited for applications which require fast transition times. The output can drive 10 TTL loads. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. For additional output configuration options refer to SDP8304/8314 and SDP8604/8614. Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level. INFRA--8.TIF OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals 2 plc decimals SQ. 3 PLCS ~~~ GN~D V~o V~cc DIM_026.ds4 Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8004/8014 Optoschmitt Detector Totem-Pole Output ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS ABSOLUTE MAXIMUM RATINGS Free-Air Temperature unless otherwise noted Supply Voltage 7 V [À] Duration of Output Short to VÙÙ or Ground High Level Output Current Irradiance Operating Temperature Range Storage Temperature Range Soldering Temperature 5 sec Notes Derate linearly from to V at SCHEMATIC Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8004/8014 Optoschmitt Detector Totem-Pole Output SCHEMATIC SCH_017.cdr SWITCHING TIME TEST CIRCUIT cir_007.cdr SWITCHING WAVEFORM FOR BUFFERS cir_013.cdr

PDF Datasheet Preview

SDP8004/8014

Optoschmitt Detector Totem-Pole Output

FEATURES
• Side-looking plastic package
• nominal acceptance angle
• TTL/LSTTL/CMOS compatible
• Totem- pole output
• Buffer SDP8004 or inverting SDP8014 logic
available
• High noise immunity output
• Mechanically and spectrally matched to

SEP8506 and SEP8706 infrared emitting diodes

DESCRIPTION The SDP8004/8014 series consists of a high speed IC molded in a side- looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. The totem- pole output is well- suited for applications which require fast transition times. The output can drive 10 TTL loads. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. For additional output configuration options refer to SDP8304/8314 and SDP8604/8614.

Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.

INFRA--8.TIF

OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals
2 plc decimals

SQ. 3 PLCS
~~~ GN~D V~o V~cc

DIM_026.ds4

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SDP8004/8014

Optoschmitt Detector Totem-Pole Output

ELECTRICAL CHARACTERISTICS PARAMETER

SYMBOL MIN TYP MAX UNITS

TEST CONDITIONS

ABSOLUTE MAXIMUM RATINGS

Free-Air Temperature unless otherwise noted

Supply Voltage
7 V [À]

Duration of Output

Short to VÙÙ or Ground

High Level Output Current

Irradiance

Operating Temperature Range

Storage Temperature Range

Soldering Temperature 5 sec

Notes Derate linearly from to V at

SCHEMATIC

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SDP8004/8014

Optoschmitt Detector Totem-Pole Output

SCHEMATIC

SCH_017.cdr

SWITCHING TIME TEST CIRCUIT
cir_007.cdr

SWITCHING WAVEFORM FOR BUFFERS
cir_013.cdr

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SDP8004-301 Datasheet file may be downloaded here without warranties.

Datasheet ID: SDP8004-301 636518