103MG9

103MG9 Datasheet

The North Magnetic Pole is marked in Red, except the 103MG5, 103MG6, 103MG8, 103MG9, and 103MG10 poles are not marked. *

Part	Datasheet
103MG9	103MG9 (pdf)

PDF Datasheet Preview
Installation Instructions for the 3HUPDQHQW 0DJQHW PK 89093 WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. GENERAL INFORMATION PERMANENT MAGNET This Permanent Magnet is designed for use with Honeywell magnetically operated solid state switches. It is fully magnetized before shipping and is ready for use. The North Magnetic Pole is marked in Red, except the 103MG5, 103MG6, 103MG8, 103MG9, and 103MG10 poles are not marked. * *Reference American Society for Testing Materials ASTM . Magnet Dimensions for reference only mm/in 103MG5 103MG6 CAUTION PRODUCT DAMAGE • Avoid contact or close proximity between magnets or other ferromagnetic objects. This prevents shifting of the magnetic pole location and slight demagnetization of the magnet. Any demagnetization or shifting of the pole location will have an appreciable effect on the operate and release distances from the face of the magnet to the surface of the switch. • Do not force the poles of two magnets together. Contact between magnets in a repelling position will partially demagnetize the magnets. • Use a direct pull to separate two magnets with unlike poles in contact. Do not slide two magnets with unlike poles in contact in the direction of the magnetization to separate them. Separating the magnets in this manner will cause a drastic reduction in magnetization. Failure to comply with these instructions will result in product damage. Sensing and Control 3HUPDQHQW 0DJQHW Magnet Dimensions for reference only mm/in 103MG8 ISSUE 2 PK 89093 103MG9 Magnet Dimensions for reference only mm/in 103MG10 WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK 89093-2-EN IL50 GLO 1299 Printed in USA

PDF Datasheet Preview

Installation Instructions for the 3HUPDQHQW 0DJQHW

PK 89093

WARNING

PERSONAL INJURY
• DO NOT USE these products as safety or
emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

GENERAL INFORMATION PERMANENT MAGNET

This Permanent Magnet is designed for use with Honeywell magnetically operated solid state switches. It is fully magnetized before shipping and is ready for use.

The North Magnetic Pole is marked in Red, except the 103MG5, 103MG6, 103MG8, 103MG9, and 103MG10 poles are not marked. *
*Reference American Society for Testing Materials ASTM .

Magnet Dimensions for reference only mm/in
103MG5
103MG6

CAUTION

PRODUCT DAMAGE
• Avoid contact or close proximity between
magnets or other ferromagnetic objects. This prevents shifting of the magnetic pole location and slight demagnetization of the magnet.

Any demagnetization or shifting of the pole location will have an appreciable effect on the operate and release distances from the face of the magnet to the surface of the switch.
• Do not force the poles of two magnets together. Contact between magnets in a repelling position will partially demagnetize the magnets.
• Use a direct pull to separate two magnets with unlike poles in contact.

Do not slide two magnets with unlike poles in contact in the direction of the magnetization to separate them. Separating the magnets in this manner will cause a drastic reduction in magnetization. Failure to comply with these instructions will result in product damage.

Sensing and Control
3HUPDQHQW 0DJQHW

Magnet Dimensions for reference only mm/in 103MG8

ISSUE 2 PK 89093
103MG9

Magnet Dimensions for reference only mm/in 103MG10

WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET

Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032

Printed with Soy Ink on 50% Recycled Paper PK 89093-2-EN IL50 GLO 1299 Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 103MG9 Datasheet file may be downloaded here without warranties.

Datasheet ID: 103MG9 636503