ASDXL10D44D-DO

ASDXL10D44D-DO Datasheet

ASDXL DO Series

Part	Datasheet
ASDXL10D44D-DO	ASDXL10D44D-DO (pdf)

Related Parts	Information
ASDXL10G24R-DO	ASDXL10G24R-DO
ASDXL05D44D-DO	ASDXL05D44D-DO
ASDXL10D44R-DO	ASDXL10D44R-DO

PDF Datasheet Preview
ASDXL DO Series Microstructure Pressure Sensors 0 in to ±5 in H2O, 0 in to 10 in H2O, 0 in to ±10 in H2O DESCRIPTION The ASDXL DO Series pressure sensors are fully calibrated and temperature compensated with on-board Application Specific Integrated Circuitry ASIC . This ASDXL DO sensor is in a DIP format Dual In-line Package and provides digital correction of sensor offset, sensitivity, temperature coefficients and non-linearity. The ASDXL DO Series has 12-bit I2C compatible protocol interface which allows easy interfacing to most commonly used microcontrollers and microprocessors. All ASDXL DO sensors are accurate to within % Full Scale Span FSS and are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. Contact factory for media compatibility on G2/D4 packages. This series is designed and manufactured in accordance with ISO 9001 standards and is compliant with the WEEE and RoHS directives. The 2-wire I2C interface has a Serial Clock Line input SCL and serial digital output data line. The output of the device is a corrected pressure value in hexadecimal format with 12-bit accuracy unsigned and not ratiometric to the supply voltage. • Available in differential and gage packages • Calibrated and temperature compensated output • 12-bit digital output I2C compatible protocol Pressure ranges from H O, 2 H O, 2 ±10 in H O 2 • Response time of 8 ms • DIP package • ASIC-enhanced output POTENTIAL APPLICATIONS • Medical equipment • HVAC controls • Pneumatic controls ASDXL DO Series 0 in to ±5 in H2O, 0 in to 10 in H2O, 0 in to ±10 in H2O GENERAL SPECIFICATIONS Characteristic Parameter Supply voltage Vs Vdc to Vdc Maximum supply voltage Vdc max. Current consumption 6 mA typ. Output current - sink 2 mA max. Output current - source 2 mA max. Characteristic Lead soldering temperature Vibration Shock Life Position sensitivity Parameter 4 s at 250 °C [482 °F] 10 g at 20 Hz to 2000 Hz 100 g for 11 ms 1 million cycles min. 50 µV/V/g typical ENVIRONMENTAL SPECIFICATIONS Characteristic Range Compensated 0 °C to 85 °C [32 °F to 185 °F] Operating -20 °C to 105 °C [-4 °F to 221 °F] Storage ORDERING INFORMATION Pressure Range 0 in to ±5 in H2O 0 in to 10 in H2O 0 in to ±10 in H2O Gage ASDXL10G24R-DO Differential ASDXL10D44R-DO Bidirectional ASDXL05D44D-DO ASDXL10D44D-DO WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: Internet: Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 0 1698 481481 +44 0 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 008140-2-EN IL50 GLO Printed in USA June 2006 Copyright 2006 Honeywell International Inc. All rights reserved.

PDF Datasheet Preview

ASDXL DO Series

Microstructure Pressure Sensors 0 in to ±5 in H2O, 0 in to 10 in H2O, 0 in to ±10 in H2O

DESCRIPTION The ASDXL DO Series pressure sensors are fully calibrated and temperature compensated with on-board Application Specific Integrated Circuitry ASIC . This ASDXL DO sensor is in a DIP format Dual In-line Package and provides digital correction of sensor offset, sensitivity, temperature coefficients and non-linearity. The ASDXL DO Series has 12-bit I2C compatible protocol interface which allows easy interfacing to most commonly used microcontrollers and microprocessors.

All ASDXL DO sensors are accurate to within % Full Scale Span FSS and are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. Contact factory for media compatibility on G2/D4 packages.

This series is designed and manufactured in accordance with ISO 9001 standards and is compliant with the WEEE and RoHS directives.

The 2-wire I2C interface has a Serial Clock Line input SCL and serial digital output data line. The output of the device is a corrected pressure value in hexadecimal format with 12-bit accuracy unsigned and not ratiometric to the supply voltage.
• Available in differential and gage packages
• Calibrated and temperature compensated output
• 12-bit digital output I2C compatible protocol

Pressure
ranges
from

H O, 2

H O, 2
±10 in H O 2
• Response time of 8 ms
• DIP package
• ASIC-enhanced output

POTENTIAL APPLICATIONS
• Medical equipment
• HVAC controls
• Pneumatic controls

ASDXL DO Series
0 in to ±5 in H2O, 0 in to 10 in H2O, 0 in to ±10 in H2O

GENERAL SPECIFICATIONS

Characteristic

Parameter

Supply voltage Vs

Vdc to Vdc

Maximum supply voltage Vdc max.

Current consumption
6 mA typ.

Output current - sink
2 mA max.

Output current - source 2 mA max.

Characteristic Lead soldering temperature Vibration Shock Life Position sensitivity

Parameter 4 s at 250 °C [482 °F] 10 g at 20 Hz to 2000 Hz 100 g for 11 ms
1 million cycles min. 50 µV/V/g typical

ENVIRONMENTAL SPECIFICATIONS

Characteristic Range

Compensated
0 °C to 85 °C [32 °F to 185 °F]

Operating
-20 °C to 105 °C [-4 °F to 221 °F]

Storage
ORDERING INFORMATION Pressure Range
0 in to ±5 in H2O 0 in to 10 in H2O 0 in to ±10 in H2O

Gage

ASDXL10G24R-DO

Differential

ASDXL10D44R-DO

Bidirectional ASDXL05D44D-DO

ASDXL10D44D-DO

WARNING

PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for
reference only. Do not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:

E-mail:

Internet:

Phone and Fax:

Asia Pacific +65 6355-2828
+65 6445-3033 Fax

Europe
+44 0 1698 481481
+44 0 1698 481676 Fax

Latin America +1-305-805-8188
+1-305-883-8257 Fax

USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax

Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422
008140-2-EN IL50 GLO Printed in USA June 2006 Copyright 2006 Honeywell International Inc. All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASDXL10D44D-DO Datasheet file may be downloaded here without warranties.

Datasheet ID: ASDXL10D44D-DO 636430