ASDX005D44D-DO

ASDX005D44D-DO Datasheet

ASDX Series

Part	Datasheet
ASDX005D44D-DO	ASDX005D44D-DO (pdf)

Related Parts	Information
ASDX015D44R	ASDX015D44R
ASDX001D44D	ASDX001D44D
ASDX030D44D	ASDX030D44D
ASDX015A24R-DO	ASDX015A24R-DO
ASDX030A24R-DO	ASDX030A24R-DO
ASDX005G24R-DO	ASDX005G24R-DO
ASDX030G24R-DO	ASDX030G24R-DO
ASDX030D44R-DO	ASDX030D44R-DO
ASDX100G24R-DO	ASDX100G24R-DO
ASDX005D44R-DO	ASDX005D44R-DO
ASDX001D44D-DO	ASDX001D44D-DO
ASDX030A24R	ASDX030A24R
ASDX001D44R	ASDX001D44R
ASDX100A24R	ASDX100A24R
ASDX100A24R-DO	ASDX100A24R-DO
ASDX015G24R-DO	ASDX015G24R-DO
ASDX005D44D	ASDX005D44D
ASDX015D44R-DO	ASDX015D44R-DO
ASDX015A24R	ASDX015A24R
ASDX001G24R-DO	ASDX001G24R-DO
ASDX015G24R	ASDX015G24R
ASDX015D44D	ASDX015D44D
ASDX100G24R	ASDX100G24R
ASDX015D44D-DO	ASDX015D44D-DO
ASDX005G24R	ASDX005G24R
ASDX030G24R	ASDX030G24R
ASDX001D44R-DO	ASDX001D44R-DO
ASDX001G24R	ASDX001G24R
ASDX100D44R	ASDX100D44R
ASDX030D44R	ASDX030D44R
ASDX005D44R	ASDX005D44R

PDF Datasheet Preview
Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi ASDX Series FEATURES • ASIC enhanced output • Wide compensated temperature range 0 °C to 85 °C [32 °F to 185 °F] • Available in absolute, differential and gage types • Pressure ranges from 0 psi to 1 psi through 0 psi to 100 psi • Accuracy ±2 % max. Volts Full Scale • Quantization step of 3 mV • Response time 8 ms TYPICAL APPLICATIONS • Flow calibrators • Ventilation and air flow monitors • Gas flow instrumentation • Dialysis equipment • Sleep apnea monitoring and therapy equipment • Barometry • HVAC controls • Pneumatic controls The ASDX series is an amplified version of Honeywell’s proven performer and industry leading SDX series sensor. The amplified ASDX sensor’s footprint is slightly larger than the SDX but it offers a high level output Vdc span on a very cost-effective basis. This series is fully calibrated and temperature compensated with on-board Application Specific Integrated Circuitry ASIC . They are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. Sensors are available to measure absolute, differential, and gage pressures. The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. Differential devices allow application of pressure to either side of the sensing diaphragm and can be used for gauge or differential measurements. All ASDX devices are accurate to within ± % full scale, designed for operation from a single Vdc supply and are manufactured in accordance with ISO 9001 standards. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi BLOCK DIAGRAM ASDX Series ELECTRICAL CONNECTIONS 2 PIN OUT ASDXxxxD4* ASDXxxxG2* ASDXxxxA2* * N/C means no connection, connecting to ground will damage to sensor. SPECIFICATIONS Maximum Ratings Supply Voltage Vs * Maximum Supply Voltage* Vdc to Vdc max. Consumption Current 6 mA typ. Output Current - Sink 2 mA max. Output Current - Source Lead Temperature 2 mA max. 2 Sec to 4 Sec 250 °C [482 °F] ENVIRONMENTAL SPECIFICATIONS ALL DEVICES Temperature Ranges: Compensated: 0 °C to 85 °C [32 °F to 185 °F] Operating: -20 °C to 105 °C [-4 °F to 221 °F] Storage Vibration: -40 °C to 125 °C [-40 °F to 257 °F] 10 g at 20 Hz to 2000 Hz ORDERING INFORMATION - PART NUMBER DESCRIPTION ASDX XXX XX 4X Sensor Series Pressure Ranges 001 = 0 psi to 1 psi D, G 005 = 0 psi to 5 psi D, G 015 = 0 psi to 15 psi D, G, A 030 = 0 psi to 30 psi D, G, A 100 = 0 psi to 100 psi D, G, A * Contact Honeywell for additional information. Device Output 4R = Vdc to Vdc 4D = Vdc* 4H = Vdc to Vdc* 4M = Vdc to Vdc* Package Style and Type A2 = DIP Package Absolute D4 = DIP Package Differential D2, G2 = DIP Package, Gage For example Part #ASDX015A24R=ASDX device 15 psi absolute, A2 Package, Vdc to Vdc Output Honeywell • Sensing and Control 3 Microstructure Pressure Sensors 0 to 1 psi through 0 to 100 psi ASDX Series TO ORDER, USE THE FOLLOWING PART NUMBER S Pressure Range 0 psi to 1 psi Absolute Gauge ASDX001G24R 0 psi to 5 psi 0 psi to 15 psi 0 psi to 30 psi 0 psi to 100 psi ASDX015A24R ASDX030A24R ASDX100A24R ASDX005G24R ASDX015G24R ASDX030G24R ASDX100G24R Differential ASDX001D44R ASDX005D44R ASDX015D44R ASDX030D44R ASDX100D44R DIMENSIONAL DRAWINGS - For Reference Only mm [in] D4 Package G2 Package Bidirectional ASDX001D44D ASDX005D44D ASDX015D44D ASDX030D44D ASDX100D44D A2 Package WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032 008090-3-EN IL50 GLO 1105 Printed in USA Copyright 2005 Honeywell International Inc. All Rights Reserved.

PDF Datasheet Preview

Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi

ASDX Series

FEATURES
• ASIC enhanced output
• Wide compensated
temperature range 0 °C to 85 °C [32 °F to 185 °F]
• Available in absolute, differential and gage types
• Pressure ranges from 0 psi to 1 psi through 0 psi to 100 psi
• Accuracy ±2 % max. Volts Full Scale
• Quantization step of 3 mV
• Response time 8 ms

TYPICAL APPLICATIONS
• Flow calibrators
• Ventilation and air flow
monitors
• Gas flow instrumentation
• Dialysis equipment
• Sleep apnea monitoring
and therapy equipment
• Barometry
• HVAC controls
• Pneumatic controls

The ASDX series is an amplified version of Honeywell’s proven performer and industry leading SDX series sensor. The amplified ASDX sensor’s footprint is slightly larger than the SDX but it offers a high level output Vdc span on a very cost-effective basis. This series is fully calibrated and temperature compensated with on-board Application Specific Integrated Circuitry ASIC . They are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases.

Sensors are available to measure absolute, differential, and gage pressures. The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. Differential devices allow application of pressure to either side of the sensing diaphragm and can be used for gauge or differential measurements.

All ASDX devices are accurate to within ± % full scale, designed for operation from a single Vdc supply and are manufactured in accordance with ISO 9001 standards.

WARNING

PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided
in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

Sensing and Control

Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi

BLOCK DIAGRAM

ASDX Series

ELECTRICAL CONNECTIONS 2 PIN OUT ASDXxxxD4*

ASDXxxxG2*

ASDXxxxA2*
* N/C means no connection, connecting to ground will damage to sensor.

SPECIFICATIONS Maximum Ratings

Supply Voltage Vs * Maximum Supply Voltage*

Vdc to Vdc max.

Consumption Current
6 mA typ.

Output Current - Sink
2 mA max.

Output Current - Source Lead Temperature
2 mA max. 2 Sec to 4 Sec 250 °C [482 °F]

ENVIRONMENTAL SPECIFICATIONS ALL DEVICES

Temperature Ranges:

Compensated:
0 °C to 85 °C [32 °F to 185 °F]

Operating:
-20 °C to 105 °C [-4 °F to 221 °F]

Storage Vibration:
-40 °C to 125 °C [-40 °F to 257 °F] 10 g at 20 Hz to 2000 Hz
ORDERING INFORMATION - PART NUMBER DESCRIPTION

ASDX XXX XX 4X

Sensor Series

Pressure Ranges
001 = 0 psi to 1 psi D, G 005 = 0 psi to 5 psi D, G 015 = 0 psi to 15 psi D, G, A 030 = 0 psi to 30 psi D, G, A 100 = 0 psi to 100 psi D, G, A * Contact Honeywell for additional information.

Device Output
4R = Vdc to Vdc 4D = Vdc* 4H = Vdc to Vdc* 4M = Vdc to Vdc*

Package Style and Type

A2 = DIP Package Absolute D4 = DIP Package Differential D2, G2 = DIP Package, Gage

For example Part #ASDX015A24R=ASDX device 15 psi absolute, A2 Package, Vdc to Vdc Output

Honeywell
• Sensing and Control 3

Microstructure Pressure Sensors 0 to 1 psi through 0 to 100 psi

ASDX Series

TO ORDER, USE THE FOLLOWING PART NUMBER S

Pressure Range 0 psi to 1 psi

Absolute

Gauge ASDX001G24R
0 psi to 5 psi 0 psi to 15 psi 0 psi to 30 psi 0 psi to 100 psi

ASDX015A24R ASDX030A24R ASDX100A24R

ASDX005G24R ASDX015G24R ASDX030G24R ASDX100G24R

Differential ASDX001D44R ASDX005D44R ASDX015D44R ASDX030D44R ASDX100D44R

DIMENSIONAL DRAWINGS - For Reference Only mm [in]

D4 Package

G2 Package

Bidirectional ASDX001D44D ASDX005D44D ASDX015D44D ASDX030D44D ASDX100D44D

A2 Package

WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET

Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032
008090-3-EN IL50 GLO 1105 Printed in USA Copyright 2005 Honeywell International Inc. All Rights Reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASDX005D44D-DO Datasheet file may be downloaded here without warranties.

Datasheet ID: ASDX005D44D-DO 636429