16-Channel Single-Ended / 8-Channel Differential HT506 / HT507
Part | Datasheet |
---|---|
![]() |
HT507DC (pdf) |
Related Parts | Information |
---|---|
![]() |
HT506 |
![]() |
HT507 |
![]() |
HT506DC |
PDF Datasheet Preview |
---|
High Temperature Analog Multiplexers 16-Channel Single-Ended / 8-Channel Differential HT506 / HT507 The High Temperature HT506/HT507 monolithic multiplexers consist of sixteen analog switches, 4-bit decode for channel selection, reference for logic switching thresholds, and enable pin for device deactivation where applications require. These multiplexers are fabricated with Honeywell’s dielectrically isolated latch-up free high temperature HTMOS linear process. Performance is specified over the full -55 to +225ºC temperature range. Typically, parts will operate up to +300ºC for a year, with derated performance. All parts are burned in at 250ºC. The input buffers are designed to operate from either TTL or CMOS levels while providing a break-before-make action. The HT506 switches one of the sixteen single-ended inputs to a common output, while the HT507 switches one of the eight differential inputs to a differential output. These parts are available in standard pinout 28-pin DIP Ceramic Packages. Applications Down-Hole Oil, Gas, and Geothermal Well Avionics Turbine Engine Control Industrial Process Control Electric Power Conversion Heavy Duty Internal Combustion Engine Specified over -55 to +225 C 16:1 Single-Ended or 8:1 Differential Configuration No latch-up On resistance 400Ω at 225ºC Output leakage less than 2.5µA at 225ºC Designed to continuously operate for at least 5 years at 225 C Enable and address inputs compatible with TTL and/or 5V CMOS logic 10V analog input/output range ±5V or 0 to 10V Split and single supply capability Break-Before-Make Switching HT506/HT507 PACKAGE PINOUTS ELECTRICAL CHARACTERISTICS Split Supply Temperature range -55 to +225 C, typical +25 C, V+ = +5V, V- = -5V, GND=0V, VIL=0.8, VIH = 2.4V, unless otherwise specified Parameters Test Conditions Analog Switch VANALOG Analog Signal Range rDS ON Drain-Source On-Resistance rDS ON Matching between Channels IS OFF Source Off Leakage Current ID OFF Drain Off Leakage Current ID ON Drain On Leakage Current Digital Control Logic High Input Voltage Logic Low Input Voltage Logic High Input Current Logic Low Input Current Logic Input Capacitance Dynamic Characteristics Address/Enable Turn-On Time tOFF Address/Enable Turn-Off Time ORDERING INFORMATION Process T = Hi Temp SOI Part Type Source 506 = 16:1 Single-Ended H = Honeywell 507 = 8:1 Differential Screening Level C= Commercial Package D = Standard DIP Find out more For more information on Honeywell’s High Temperature Electronics visit us online at or contact us at 800-323-8295 or Customer Service Email: Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the application or use of any product or circuit described herein neither does it convey any license under its patent rights nor the rights of others. Honeywell 12001 Highway 55 Plymouth, MN 55441 Tel 800-323-8295 4 Form #900200 October 2010 Honeywell International Inc. |
More datasheets: IRKD91/04A | IRKJ91/10A | MV8832 | APTGF90H60TG | ANT-433-CW-HD | DAMM-15P-S | DEMMZ9SN | HT506 | HT507 | HT506DC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HT507DC Datasheet file may be downloaded here without warranties.