UX60-MB-5S8(61)

UX60-MB-5S8(61) Datasheet

Part No. UX60-MB-5ST

Part	Datasheet
UX60-MB-5S8(61)	UX60-MB-5S8(61) (pdf)

Related Parts	Information
UX60-MB-5S8(21)	UX60-MB-5S8(21)
UX60-MB-5ST(60)	UX60-MB-5ST(60)
UX60-MB-5S8(01)	UX60-MB-5S8(01)
UX60-MB-5S8	UX60-MB-5S8
UX60A-MB-5ST	UX60A-MB-5ST
UX60-MB-5ST	UX60-MB-5ST

PDF Datasheet Preview
Meet requirements of USB UX Series sFeatures Certified to perform as required in USB Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission speeds up to 480Mbps. Designed for Low Skew performance The distance between twisted pairs conductors i.e., contact nos. 2 and 3 is of equal electrical length, for receptacle and plug, resulting in zero theoretical skew. Controlled Termination of Individual Conductors The termination part of the contact is firmly attached in the molded insulator body. Hirose’s Electric unique design of the metal shield prevents short circuits, allowing the overmold resin to flow in the terminated area. By not using heat shrinkable tubing or any other additional process , the non-twisted part of the conductors is very short, suppressing any unwanted impedance disturbances in the termination area. Contact No. 3 Contact No. 2 Ease of mating and handling Thin design of the plug assembly and the overmold section allows use in small spaces. The plug also incorporates a build-in snap-lock feature, providing tactile verification of the full and secure mating of plug and receptacle. Two types of metal shields Two styles of the receptacle metal shield are available, depending on the customer’s PCB design requirement -Surface Mount Termination -Solder Dip Type Printed Circuit Board placement features Precise location on the board can be accomplished using receptacle assemblies with or without the positioning boss. Board placement with Automatic Equipment Receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the soldering process and are supplied on the reels. Environmental considerations Plating is lead-free in order to protect environment. Support of Non-halogen Cable Wiring harness can be arranged in non-halogen cable types. Note Non-halogen items are not covered in the current USB Standard. sApplications Personal and mobile computer peripheral equipment, data terminals, digital cameras, MP3 players, PDA’s, GPS and other devices utilizing standard USB protocols sProduct Specifications Ratings Current rating Voltage rating 1A 5 V AC Operating temperature range -30ç to +75ç Item 1.Contact resistance 50 m ohms max. 2.Insulation resistance 100 M ohms min. Specification 3.Dielectric No flashover or insulation breakdown Withstanding Voltage 4.Capacitance 2 PF min. 5.Mating/un-mating forces Mating 35N max. Un-mating 7N min. 6.Durability sOrdering information qReceptacles qPlugs qPlug Harnesses UX 60 A - MB - 5 S T UX 40 A - MB - 5 P UX 40 A - MB - 5 P A - 1000 - 1001 1 Series name 2 Contact wiring 3 Receptacle serial indication 4 Connector type 5 Number of contacts 6 Contact type 7 Metal shield termination UX 60 SMT type 40 Solder wiring type A Without positioning post MB Mini B type 5 S Female contact P Male contact T SMT type 8 Solder dip type Dip length Note 1 A Type supporting thick cable A Standard A type 1000 mm Note 2 Note 3 Note 1 Types with different dip style termination lengths can also be provided. Note 2 Various cable lengths can be provided. Note 3 Detailed specifications of the harness items can be supplied. Please contact your Hirose Electric account representative for details. sReceptacles qMetal Shield SMT Type With Positioning Post Part No. UX60-MB-5ST CL No. 240-0001-9 Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels. BRecommended Board Mounting Pattern 3.5min. max. Dia. mm hole Connector outside diameter No conductive traces 7.7min. min. CONTACT No.1 CONTACT No.5 qMetal Shield SMT Type Without Positioning Post Part No. UX60A-MB-5ST CL No. 240-0003-4 Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels. BRecommended Board Mounting Pattern 6 min. Connector outside diameter No conductive traces min. 7.7min. CONTACT No.1 CONTACT No.5 sReceptacles qMetal Shield Dip Type With Positioning Post Part No. UX60-MB-5S8 CL No. 240-0002-1 Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels.

PDF Datasheet Preview

Meet requirements of USB

UX Series
sFeatures

Certified to perform as required in USB Standard

Tested and certified by USB Association approved laboratory the connectors will perform at transmission speeds up to 480Mbps.

Designed for Low Skew performance

The distance between twisted pairs conductors i.e., contact nos. 2 and 3 is of equal electrical length, for receptacle and plug, resulting in zero theoretical skew.

Controlled Termination of Individual Conductors

The termination part of the contact is firmly attached in the molded insulator body. Hirose’s Electric unique design of the metal shield prevents short circuits, allowing the overmold resin to flow in the terminated area. By not using heat shrinkable tubing or any other additional process , the non-twisted part of the conductors is very short, suppressing any unwanted impedance disturbances in the termination area.

Contact No. 3 Contact No. 2

Ease of mating and handling

Thin design of the plug assembly and the overmold section allows use in small spaces. The plug also incorporates a build-in snap-lock feature, providing tactile verification of the full and secure mating of plug and receptacle.

Two types of metal shields

Two styles of the receptacle metal shield are available, depending on the customer’s PCB design requirement -Surface Mount Termination -Solder Dip Type

Printed Circuit Board placement features

Precise location on the board can be accomplished using
receptacle assemblies with or without the positioning boss.

Board placement with Automatic Equipment

Receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the
soldering process and are supplied on the reels.

Environmental considerations

Plating is lead-free in order to protect environment.

Support of Non-halogen Cable

Wiring harness can be arranged in non-halogen cable types.

Note Non-halogen items are not covered in the current USB Standard.
sApplications

Personal and mobile computer peripheral equipment, data terminals, digital cameras, MP3 players, PDA’s, GPS and other devices utilizing standard USB protocols
sProduct Specifications

Ratings

Current rating Voltage rating
1A 5 V AC

Operating temperature range
-30ç to +75ç

Item 1.Contact resistance 50 m ohms max. 2.Insulation resistance 100 M ohms min.

Specification
3.Dielectric No flashover or insulation breakdown

Withstanding Voltage
4.Capacitance
2 PF min.
5.Mating/un-mating forces Mating 35N max. Un-mating 7N min.
6.Durability
sOrdering information
qReceptacles qPlugs qPlug Harnesses

UX 60 A - MB - 5 S T

UX 40 A - MB - 5 P

UX 40 A - MB - 5 P A - 1000 - 1001
1 Series name 2 Contact wiring
3 Receptacle serial indication 4 Connector type 5 Number of contacts 6 Contact type 7 Metal shield termination

UX 60 SMT type 40 Solder wiring type A Without positioning post MB Mini B type 5 S Female contact P Male contact T SMT type 8 Solder dip type Dip length Note 1 A Type supporting thick cable A Standard A type 1000 mm Note 2 Note 3

Note 1 Types with different dip style termination lengths can also be provided. Note 2 Various cable lengths can be provided. Note 3 Detailed specifications of the harness items can be supplied.

Please contact your Hirose Electric account representative for details.
sReceptacles
qMetal Shield SMT Type With Positioning Post

Part No. UX60-MB-5ST

CL No. 240-0001-9

Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels.

BRecommended Board Mounting Pattern
3.5min.
max.

Dia. mm hole

Connector outside diameter No conductive traces
7.7min.
min.

CONTACT No.1

CONTACT No.5
qMetal Shield SMT Type Without Positioning Post

Part No. UX60A-MB-5ST

CL No. 240-0003-4

Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels.

BRecommended Board Mounting Pattern
6 min.

Connector outside diameter

No conductive traces
min.
7.7min.

CONTACT No.1

CONTACT No.5
sReceptacles
qMetal Shield Dip Type With Positioning Post

Part No. UX60-MB-5S8

CL No. 240-0002-1

Note Embossed tape reel packaging 1,000 pieces/reel Order by the number of reels.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UX60-MB-5S8(61) Datasheet file may be downloaded here without warranties.

Datasheet ID: UX60-MB-5S8(61) 636241