QR/P17-SCA-211(50)

QR/P17-SCA-211(50) Datasheet

QR/P18 Series

Part	Datasheet
QR/P17-SCA-211(50)	QR/P17-SCA-211(50) (pdf)

Related Parts	Information
QR/P17-PCA-111(50)	QR/P17-PCA-111(50)
QR/P17-SCA-111(50)	QR/P17-SCA-111(50)
QR/P17-PCA-211(50)	QR/P17-PCA-211(50)
QR/P17-14P-A(51)	QR/P17-14P-A(51)

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors IDC QR/P18 Series sOverview The QR/P18 Series of miniature rack/panel connectors is designed for the complete segmentation of the structure of the external holder/terminal units of the well-received QR/P Series of plug-in rectangular rack/panel connectors furthermore, the subsequent insertion of the harnessed terminal unit affords a more efficient harness mounting task. These connectors are configured with 12, 18, or 24 insulation displacement connection positions in the signal portion, and 4 crimp positions in the power supply portion. sFeatures Completely segmented structure of the external holder/terminal unit In order to improve the harness mounting task, the connectors are designed for the complete segmentation of the external holder and the signal/power supply unit, and the method of subsequently inserting harnessed products aims to improve the workability of the power supply/signal section harness as well as the mounting of the set. Signal unit The signal unit uses the highly reliable insulation displacement connection method. The wire is AWG #26 and the insulation outside diameter is mm. The insulation displacement task can now be used by fitting a special applicator to a commercially available automatic insulation displacement machine, or a manual press can also be selected. Power supply portion The power supply terminals permit the use of a crimp harness using wire of AWG #16 to 18 and insulation outside diameter of to mm , and can accommodate a maximum of 12 A. Sequenced structure Connectors possess two sequenced contacts in the signal male unit and one sequenced contact in the power supply female unit making them perfect in terms of safety too. Panel installation Installation to a panel uses a single-action method on the anchored side and a floating screw structure on the floating side which permits smooth insertion and disconnection without forcing. All components and materials comply with the requirements of the EU Directive 2002/95/EC. *A portion of this series is suitably constructed for high-speed differential transfer, and using a suitable cable, transfer of 2.5Gbps per pair is possible. Power supply contact male unit External holder Power supply contact female unit Power supply male contacts Signal contact female unit Power supply female contacts Signal contact male unit Panel Gbps Eye Pattern Waveform 2.5Gbps AWG28 2m Scale X 100psec/div Y 100V/div sApplications PPC, transmitting and receiving devices, data communications equipment, vending machines, measuring instruments, factory automation equipment, and other highspeed transfer applications, etc. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. sProduct Specifications Ratings Voltage rating Current rating 125 V AC Signal contacts 300V AC Power contacts 1A Signal contacts Operating temperature range -40ç to +105ç Note 1 12A Power contacts Item sOrdering information qExternal holder. QR / P18 - S A 4 P - A 2 345 6 1 Series name 2 Signal contact type S Female contact P Male contact 3 Number of signal contact of external holder A 12 pos. Contact pitch 1.5mm B 18 pos. Contact pitch 1.5mm C 24 pos. Contact pitch 1.5mm 4 Number of power contact 5 Power contact type S Female contact P Male contact 6 Applicable panel thickness A 2mm B 1.5mm qSignal contact termination block QR / P18 - 12 S A 1 Series name 2 Number of signal contact 3 Signal contact type S Female contact P Male contact 4 Number of signal contact of signal contact termination block A 12 pos. Contact pitch 1.5mm B 18 pos. Contact pitch 1.5mm C 24 pos. Contact pitch 1.5mm qPower contact insert QR / P18 - 4 P - C 1 Series name 2 Number of power contact 3 Power contact type S Female contact P Male contact 4 Connector type C Crimp housing qPower contact QR / P17 - PC A - 1 1 Series name 2 Power contact type PC Male crimp contact SC Female crimp contact 3 Applicable wire style A UL1015 4 Packaging 5 Applicable wire 6 Contact plating 1 Pack packaging 2 Reel packaging 1 AWG#16 to 18 1 Gold plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. sExternal holder Mated condition Shown for reference Panel Panel QR/P15-SCREW 2 Note Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are mm or less. qFemale power contact, male signal contact type Panel cutout Applicable panel thickness 2.0mm 6-R0.50-0.2 D+00.1 C±0.1 2-R0.3+0.02

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.

Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors IDC

QR/P18 Series
sOverview

The QR/P18 Series of miniature rack/panel connectors is designed for the complete segmentation of the structure of the external holder/terminal units of the well-received QR/P Series of plug-in rectangular rack/panel connectors furthermore, the subsequent insertion of the harnessed terminal unit affords a more efficient harness mounting task. These connectors are configured with 12, 18, or 24 insulation displacement connection positions in the signal portion, and 4 crimp positions in the power supply portion.
sFeatures

Completely segmented structure of the external holder/terminal unit

In order to improve the harness mounting task, the connectors are designed for the complete segmentation of the external holder and the signal/power supply unit, and the method of subsequently inserting harnessed products aims to improve the workability of the power supply/signal section harness as well as the mounting of the set.

Signal unit

The signal unit uses the highly reliable insulation displacement connection method. The wire is AWG #26 and the insulation outside diameter is mm.

The insulation displacement task can now be used by fitting a special applicator to a commercially available automatic insulation displacement machine, or a manual press can also be selected.

Power supply portion

The power supply terminals permit the use of a crimp harness using wire of AWG #16 to 18 and insulation outside diameter of to mm , and can accommodate a maximum of 12 A.

Sequenced structure

Connectors possess two sequenced contacts in the signal male unit and one sequenced contact in the power supply female unit making them perfect in terms of safety too.

Panel installation

Installation to a panel uses a single-action method on the anchored side and a floating screw structure on the floating side which permits smooth insertion and disconnection without forcing.

All components and materials comply with the requirements of the EU Directive 2002/95/EC.
*A portion of this series is suitably constructed for high-speed differential transfer, and using a suitable cable, transfer of 2.5Gbps per pair is possible.

Power supply contact male unit External holder

Power supply contact female unit

Power supply male contacts

Signal contact female unit

Power supply female contacts

Signal contact male unit

Panel

Gbps Eye Pattern Waveform
2.5Gbps AWG28 2m

Scale X 100psec/div Y 100V/div
sApplications

PPC, transmitting and receiving devices, data communications equipment, vending machines, measuring instruments, factory automation equipment, and other highspeed transfer applications, etc.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.
sProduct Specifications

Ratings

Voltage rating Current rating
125 V AC Signal contacts
300V AC Power contacts 1A Signal contacts

Operating temperature range
-40ç to +105ç Note 1
12A Power contacts

Item
sOrdering information
qExternal holder.

QR / P18 - S A 4 P - A
2 345 6
1 Series name 2 Signal contact type S Female contact

P Male contact 3 Number of signal contact of external holder

A 12 pos. Contact pitch 1.5mm B 18 pos. Contact pitch 1.5mm C 24 pos. Contact pitch 1.5mm
4 Number of power contact 5 Power contact type S Female contact

P Male contact 6 Applicable panel thickness

A 2mm B 1.5mm
qSignal contact termination block

QR / P18 - 12 S A
1 Series name 2 Number of signal contact 3 Signal contact type S Female contact

P Male contact
4 Number of signal contact of signal contact termination block A 12 pos. Contact pitch 1.5mm B 18 pos. Contact pitch 1.5mm C 24 pos. Contact pitch 1.5mm
qPower contact insert

QR / P18 - 4 P - C
1 Series name 2 Number of power contact 3 Power contact type S Female contact

P Male contact
4 Connector type

C Crimp housing
qPower contact

QR / P17 - PC A - 1
1 Series name 2 Power contact type PC Male crimp contact

SC Female crimp contact 3 Applicable wire style A UL1015
4 Packaging
5 Applicable wire 6 Contact plating
1 Pack packaging 2 Reel packaging
1 AWG#16 to 18 1 Gold plated

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.
sExternal holder

Mated condition Shown for reference

Panel

Panel

QR/P15-SCREW 2

Note Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are mm or less.
qFemale power contact, male signal contact type

Panel cutout Applicable panel thickness 2.0mm
6-R0.50-0.2

D+00.1 C±0.1
2-R0.3+0.02

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QR/P17-SCA-211(50) Datasheet file may be downloaded here without warranties.

Datasheet ID: QR/P17-SCA-211(50) 636232