FH34SRJ-50S-0.5SH(99)

FH34SRJ-50S-0.5SH(99) Datasheet

FH34 S Series

Part	Datasheet
FH34SRJ-50S-0.5SH(99)	FH34SRJ-50S-0.5SH(99) (pdf)

PDF Datasheet Preview
mm Pitch, mm above the board Top and Top/Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34 S Series Increased FPC/FFC holding force Space saving 30 pos. shown Actuator Metal fittings 17mm 1.0mm 3.2mm Easy FPC/FFC insertion Back opening rotating Top contacts FPC / FFC 17mm All four sides are chamfered. •Features Low-profile With the mm above the board and width of mm the connectors are used in space saving applications. Increased FPC/FFC retention As compared with existing similar construction connectors * In horizontal direction Approximately times * In vertical direction Approximately 2 times Unique Back-Flip rotating actuator The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. Easy FPC insertion and reliable electrical connection Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. Delivered with the actuator open FPC/FPC can be immediately inserted without the need for the opening of the actuator. Accepts standard FPC thickness 0.3mm thick standard Flexible Printed Circuit FPC can be used. This is the only ultra-low profile ZIF connector using standard FPC. Compatible with existing connectors. FPC/FFC and PCB mounting patterns are the same as for the FH19SC Series bottom contact , allowing the use of both connectors for interconnections between two boards or replacement of the connectors. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. 10.Halogen-free* *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum Ready to insert FPC/FFC Delivered with the actuator open FPC/FFC inserted and retained. Completed electrical and mechanical connection. Compatible with existing connectors. FH19SC SERIES 2013.11w FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors •Ordering information FH 34S RJ - 30S - SH 50 1 Series name FH 2 Series No. 34S 3 Blank Top contact RJ Top and Bottom contact, halogen-free Flame retardance UL94V-0 . 4 Number of positions 4 to 40 5 Contact pitch 0.5mm 6 Termination type SH SMT horizontal mounting type 7 Specifications product 5,000 pieces/reel pieces/reel FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors •Connector Dimensions A±0.15 ∞Number contacts H Number of contacts indicator Cav No. HRS mark C D±0.1 Note 1 The coplanarity of each terminal lead within specified dimension is mm Max. Note 2 Packaged on tape and reel only. Check packaging specification. Note 3 Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. Note 4 After reflow, the terminal plating may change color, however this does not represent a quality issue. Part Number FH34S-7S-0.5SH 50 FH34S-23S-0.5SH 50 FH34S-32S-0.5SH 50 FH34SRJ-4S-0.5SH 50 FH34SRJ-6S-0.5SH 50 FH34SRJ-8S-0.5SH 50 FH34SRJ-10S-0.5SH 50 FH34SRJ-11S-0.5SH 50 FH34SRJ-12S-0.5SH 50 FH34SRJ-14S-0.5SH 50 FH34SRJ-16S-0.5SH 50 FH34SRJ-18S-0.5SH 50 FH34SRJ-20S-0.5SH 50 FH34SRJ-22S-0.5SH 50 FH34SRJ-24S-0.5SH 50 FH34SRJ-26S-0.5SH 50 FH34SRJ-30S-0.5SH 50 FH34SRJ-34S-0.5SH 50 FH34SRJ-40S-0.5SH 50 CL No. CL580-1224-2-50 CL580-1228-3-50 CL580-1208-6-50 CL580-1238-7-50 CL580-1236-1-50 CL580-1231-8-50 CL580-1251-5-50 CL580-1258-4-50 CL580-1253-0-50 CL580-1252-8-50 CL580-1259-7-50 CL580-1248-0-50 CL580-1256-9-50 CL580-1254-3-50 CL580-1255-6-50 CL580-1247-8-50 CL580-1232-0-50 CL580-1261-9-50 CL580-1260-9-50 Tape and reel packaging 5,000 pieces/reel, 500 pieces/reel . Order by number of reels. Number of Contacts All dimensions mm FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors •Recommended PCB mounting pattern and metal mask dimensions Metal mask Recommended metal mask thickness t=0.1 B ∞Number of contacts Metal mask E±0.1 F±0.1 •Recommended FPC/FFC Dimensions G±0.05 B±0.03 2-R0.2 2.5MIN Stiffener Uncover area Note 1 Stiffener dimension should be 2.5mm min., and H dimension should be 0.5mm for improved flexibility of FPC. Note 2 When using the FPC/FFC in FH34S or FH19SC connectors, the exposed area inserted in either connector is 2.5mm ± 0.3mm and the stiffener is 3.5mm min. All dimensions mm CL No. Number of Contacts FH34S-7S-0.5SH 50

PDF Datasheet Preview

mm Pitch, mm above the board Top and Top/Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34 S Series

Increased FPC/FFC holding force

Space saving 30 pos. shown

Actuator

Metal fittings
17mm
1.0mm 3.2mm

Easy FPC/FFC insertion

Back opening rotating

Top contacts

FPC / FFC
17mm

All four sides are chamfered.
•Features

Low-profile

With the mm above the board and width of mm the connectors are used in space saving applications.

Increased FPC/FFC retention

As compared with existing similar construction connectors * In horizontal direction Approximately times * In vertical direction Approximately 2 times

Unique Back-Flip rotating actuator

The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection.

Easy FPC insertion and reliable electrical connection

Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection.

Delivered with the actuator open

FPC/FPC can be immediately inserted without the need for the opening of the actuator.

Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit FPC can be used. This is the only ultra-low profile ZIF connector using standard FPC.

Compatible with existing connectors.

FPC/FFC and PCB mounting patterns are the same as for the FH19SC Series bottom contact , allowing the use of both connectors for interconnections between two boards or replacement of the connectors.

Conductive traces on the PCB can run under the connector

No exposed contacts on the bottom of the connector.

Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors.
10.Halogen-free*
*As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum

Ready to insert FPC/FFC

Delivered with the actuator open

FPC/FFC inserted and retained. Completed electrical and mechanical connection.

Compatible with existing connectors. FH19SC SERIES
2013.11w

FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
•Ordering information

FH 34S RJ - 30S - SH 50
1 Series name FH 2 Series No. 34S 3 Blank Top contact

RJ Top and Bottom contact, halogen-free Flame retardance UL94V-0 .
4 Number of positions 4 to 40 5 Contact pitch 0.5mm
6 Termination type SH SMT horizontal mounting type
7 Specifications product 5,000 pieces/reel
pieces/reel

FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
•Connector Dimensions

A±0.15
∞Number
contacts H

Number of contacts indicator Cav No.

HRS mark

C D±0.1

Note 1 The coplanarity of each terminal lead within specified dimension is mm Max. Note 2 Packaged on tape and reel only. Check packaging specification. Note 3 Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. Note 4 After reflow, the terminal plating may change color, however this does not represent a quality issue.

Part Number FH34S-7S-0.5SH 50 FH34S-23S-0.5SH 50 FH34S-32S-0.5SH 50 FH34SRJ-4S-0.5SH 50 FH34SRJ-6S-0.5SH 50 FH34SRJ-8S-0.5SH 50 FH34SRJ-10S-0.5SH 50 FH34SRJ-11S-0.5SH 50 FH34SRJ-12S-0.5SH 50 FH34SRJ-14S-0.5SH 50 FH34SRJ-16S-0.5SH 50 FH34SRJ-18S-0.5SH 50 FH34SRJ-20S-0.5SH 50 FH34SRJ-22S-0.5SH 50 FH34SRJ-24S-0.5SH 50 FH34SRJ-26S-0.5SH 50 FH34SRJ-30S-0.5SH 50 FH34SRJ-34S-0.5SH 50 FH34SRJ-40S-0.5SH 50

CL No. CL580-1224-2-50 CL580-1228-3-50 CL580-1208-6-50 CL580-1238-7-50 CL580-1236-1-50 CL580-1231-8-50 CL580-1251-5-50 CL580-1258-4-50 CL580-1253-0-50 CL580-1252-8-50 CL580-1259-7-50 CL580-1248-0-50 CL580-1256-9-50 CL580-1254-3-50 CL580-1255-6-50 CL580-1247-8-50 CL580-1232-0-50 CL580-1261-9-50 CL580-1260-9-50

Tape and reel packaging 5,000 pieces/reel, 500 pieces/reel .

Order by number of reels.

Number of Contacts

All dimensions mm

FH34 S Series●0.5 mm Pitch, mm above the board Top and Top Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
•Recommended PCB mounting pattern and metal mask dimensions

Metal mask

Recommended metal mask thickness t=0.1 B
∞Number of contacts

Metal mask

E±0.1 F±0.1
•Recommended FPC/FFC Dimensions

G±0.05 B±0.03
2-R0.2
2.5MIN Stiffener

Uncover area

Note 1 Stiffener dimension should be 2.5mm min., and H dimension should be 0.5mm for improved flexibility of FPC. Note 2 When using the FPC/FFC in FH34S or FH19SC connectors, the exposed area inserted in either connector is 2.5mm ±
0.3mm and the stiffener is 3.5mm min.

All dimensions mm

CL No.

Number of Contacts

FH34S-7S-0.5SH 50

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH34SRJ-50S-0.5SH(99) Datasheet file may be downloaded here without warranties.

Datasheet ID: FH34SRJ-50S-0.5SH(99) 636146