FH23-61S-0.3SHW(51)

FH23-61S-0.3SHW(51) Datasheet

FH23 - 39S - SHW 05

Part	Datasheet
FH23-61S-0.3SHW(51)	FH23-61S-0.3SHW(51) (pdf)

Related Parts	Information
FH23-33S-0.3SHAW(51)	FH23-33S-0.3SHAW(51)
FH23-17S-0.3SHAW(51)	FH23-17S-0.3SHAW(51)
FH23-31S-0.3SHW(51)	FH23-31S-0.3SHW(51)
FH23-39S-0.3SHAW(51)	FH23-39S-0.3SHAW(51)
FH23-39S-0.3SHW(51)	FH23-39S-0.3SHW(51)
FH23-33S-0.3SHW(51)	FH23-33S-0.3SHW(51)
FH23-15S-0.3SHAW(51)	FH23-15S-0.3SHAW(51)
FH23-27S-0.3SHW(51)	FH23-27S-0.3SHW(51)
FH23-27S-0.3SHAW(51)	FH23-27S-0.3SHAW(51)
FH23-31S-0.3SHAW(51)	FH23-31S-0.3SHAW(51)
FH23-25S-0.3SHW(51)	FH23-25S-0.3SHW(51)
FH23-21S-0.3SHW(51)	FH23-21S-0.3SHW(51)
FH23-17S-0.3SHW(51)	FH23-17S-0.3SHW(51)
FH23-61S-0.3SHAW(51)	FH23-61S-0.3SHAW(51)
FH23-51S-0.3SHAW(52)	FH23-51S-0.3SHAW(52)
FH23-45S-0.3SHAW(51)	FH23-45S-0.3SHAW(51)
FH23-51S-0.3SHW(09)	FH23-51S-0.3SHW(09)

PDF Datasheet Preview
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors FH 23 Series qStaggered termination configuration. Only mm above the board. Leadless type Completely enclosed bottom surface Lead type sFeatures FPC low insertion force and high holding force Hirose Electric's unique low insertion force LIF design patents pending improves the Flexible Printed Circuit FPC holding force after insertion. FPC insertion force:Reduced approximately 36% as compared with FH18 Series connectors . FPC holding force:Improvement of approximately 22% as compared with FH18 Series connectors . Temporary hold of FPC There is no need to hold the FPC after insertion in the connector. The connector will hold it in correct position, allowing closing of the actuator. Easy board mounting The surface mounted termination of the contacts is staggered on mm centers, positioned on front and back of the connector. Bottom of the connector is completely insulated, allowing conductive traces on PCB to run under the connector. Proven Flip-lock Actuator assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. Variations to suit different mounting areas Available with lead and leadless type of terminations for opposing FPC insertion side . Designed for placement with automatic equipment Flat top surface allows pick-up with vacuum nozzles. Packaged in embossed tape, on reel. One reel contains 2,500 pieces. Accepts 0.2mm thick FPC Variety of contact positions Available with 15,17,21, 25, 27, 31, 33, 39, 45, 51and 61 pos. Environmental considerations Plating is lead-free in order to protect environment. sApplications Mobile phones, PDA’s, digital cameras, digital video cameras and other compact devices requiring interconnections of the main circuit with the LCD, plasma display PDP , camera module, or other devices. 1.25mm When the actuator is opened Temporary hold of FPC When the actuator is closed sProduct Specifications Ratings Current rating A DC Voltage rating 50 V AC Operating temperature range Storage temperature range -55 ç to +85ç Note 1 -10ç to +50ç Note 2 Operating humidity range sOrdering information FH23 - 39S - SHW 05 1 Series name FH23 2 No. of contacts. Number of contacts 15,17,21,25,27,31,33,39,45,51,61 3 Contact pitch mm 4 Terminal type SHW SMT horizontal mounting type, lead type termination. SHAW SMT horizontal mounting type, lead-less type termination. 5 Plating specifications Blank 05 Tin plating Gold plating BConnector Dimensions Lead Type termination 1.25 Including contact terminal leads Number of contacts indicator D FPC insertion area dimensions 0.05MAX. 0.1MAX. 0.05MAX. 0.1MAX. Notes 1 The coplanarity of each terminal lead is within 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Lead Type Unit mm CL No. Number of Contacts FH23-15S-0.3SHW 586-1317-0 FH23-17S-0.3SHW 586-1300-7 FH23-21S-0.3SHW 586-1314-1 FH23-25S-0.3SHW 586-1322-0 FH23-27S-0.3SHW 586-1308-9 FH23-31S-0.3SHW 586-1302-2 FH23-33S-0.3SHW 586-1304-8 FH23-39S-0.3SHW 586-1306-3 FH23-45S-0.3SHW 586-1318-2 FH23-51S-0.3SHW 586-1312-6 FH23-61S-0.3SHW

PDF Datasheet Preview

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

FH 23 Series
qStaggered termination configuration. Only mm above the board.

Leadless type

Completely enclosed bottom surface

Lead type
sFeatures

FPC low insertion force and high holding force

Hirose Electric's unique low insertion force LIF design patents pending improves the Flexible Printed Circuit FPC holding force after insertion.

FPC insertion force:Reduced approximately 36% as compared with FH18 Series connectors .

FPC holding force:Improvement of approximately 22% as compared with FH18 Series connectors .

Temporary hold of FPC

There is no need to hold the FPC after insertion in the connector. The connector will hold it in correct position, allowing closing of the actuator.

Easy board mounting

The surface mounted termination of the contacts is staggered on mm centers, positioned on front and back of the connector.

Bottom of the connector is completely insulated, allowing conductive traces on PCB to run under the connector.

Proven Flip-lock Actuator assures easy and reliable operation

Rotating actuator permits easy insertion and reliable connection with the FPC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection.

Variations to suit different mounting areas

Available with lead and leadless type of terminations for opposing FPC insertion side .

Designed for placement with automatic equipment

Flat top surface allows pick-up with vacuum nozzles.

Packaged in embossed tape, on reel. One reel contains 2,500 pieces.

Accepts 0.2mm thick FPC

Variety of contact positions

Available with 15,17,21, 25, 27, 31, 33, 39, 45, 51and 61 pos.

Environmental considerations

Plating is lead-free in order to protect environment.
sApplications

Mobile phones, PDA’s, digital cameras, digital video cameras and other compact devices requiring interconnections of the main circuit with the LCD, plasma display PDP , camera module, or other devices.
1.25mm

When the actuator is opened Temporary hold of FPC

When the actuator is closed
sProduct Specifications

Ratings

Current rating A DC Voltage rating 50 V AC

Operating temperature range

Storage temperature range
-55 ç to +85ç Note 1
-10ç to +50ç Note 2

Operating humidity range
sOrdering information

FH23 - 39S - SHW 05
1 Series name FH23 2 No. of contacts.

Number of contacts 15,17,21,25,27,31,33,39,45,51,61 3 Contact pitch mm
4 Terminal type SHW SMT horizontal mounting type, lead type termination. SHAW SMT horizontal mounting type, lead-less type termination.
5 Plating specifications Blank 05

Tin plating Gold plating

BConnector Dimensions Lead Type termination
1.25 Including contact terminal leads

Number of contacts indicator

D FPC insertion area dimensions
0.05MAX.
0.1MAX.
0.05MAX.
0.1MAX.

Notes 1 The coplanarity of each terminal lead is within 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.

Lead Type

Unit mm

CL No.

Number of Contacts

FH23-15S-0.3SHW
586-1317-0

FH23-17S-0.3SHW
586-1300-7

FH23-21S-0.3SHW
586-1314-1

FH23-25S-0.3SHW
586-1322-0

FH23-27S-0.3SHW
586-1308-9

FH23-31S-0.3SHW
586-1302-2

FH23-33S-0.3SHW
586-1304-8

FH23-39S-0.3SHW
586-1306-3

FH23-45S-0.3SHW
586-1318-2

FH23-51S-0.3SHW
586-1312-6

FH23-61S-0.3SHW

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH23-61S-0.3SHW(51) Datasheet file may be downloaded here without warranties.

Datasheet ID: FH23-61S-0.3SHW(51) 636139