DM2A-SFW-PEJ-S(03)

DM2A-SFW-PEJ-S(03) Datasheet

DM2 Series

Part	Datasheet
DM2A-SFW-PEJ-S(03)	DM2A-SFW-PEJ-S(03) (pdf)

Related Parts	Information
DM2B-DSFW-PEJ-D1S(21)	DM2B-DSFW-PEJ-D1S(21)

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. miniSDTM Card Connectors DM2 Series Extremely small size Standard top board mounting DM2A •Features Extremely small size Board footprint as well as the length, width and height of the connector has been reduced in order to minimize use of valuable space in today’s miniature devices. With the miniSD card inserted the overall length is shortest in the industry. Push-in / Push-out card ejection Inserted card is securely held in place with an approximate force of 4 N, assuring reliable connection and retention in the connector, even when subjected to accidental shock. When pushed again, the card will self-eject to distance of 4 mm, allowing safe removal from the connector. Protection against card loss Built-in card retention springs will keep the card inserted when card may be accidentally partially pulled-out. Effective grounding and shielding The VSS contacts connect directly to the metal cover, assuring superior ground connection Patents pending. In addition, metal cover will connect with the PC board surface at four points, providing highly effective grounding and shielding of the connector. Durable, load-resistant construction While miniature in size and lightweight, the use of metal cover assures it’s reliable and stable performance. Two-point contact Two-point contact offers high contact reliability. Built-in card detection switch The card detection switch is a normally closed, opening when the card is inserted. All components and materials comply with the requirements of EU Directive 2002/95/EC. •Applications Mobile phones, digital cameras, PDA’s and any other portable device requiring use of miniSDTM memory card. miniSDTM is a trademark of the SD Card Association. Extremely small size DM2B Card ejection prevention mechanism Other suppliers DM2 Card retention springs Two-point contact The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHDS boendinsceocnttionuresd soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. •Product Specifications Ratings Current rating 0.5A DC Operating temperature range -25çto +85ç Note 1 Operating humidity range Relative humidity 95% max. Voltage rating 125V AC Storage temperature range -40çto +85ç Note 2 No condensation Item Insulation resistance Withstanding voltage Contact resistance Vibration Humidity Specification 1000 min. Initial value No flashover or insulation breakdown. max. Initial value No electrical discontinuity of 100 ns or more. Contact resistance max. from initial value Insulation resistance min. Temperature cycle Contact resistance max. from initial value Insulation resistance min. Durability mating/unmating Contact resistance max. from initial value •Ordering information DM2 - * - PEJ - * 1 Series name :DM2 2 Connector type A:Standard receptacle 4 Card ejection code PEJ Push insert/push eject 5 Ground terminal type D1S SMT - at 4 points D1S Through hole at 2 points + SMT at 4 points The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at osanlens erecptroesresntative. •Standard Top board mounting DM2A-SFW-PEJ-S CL No. 609-0010-0 #11 NC #4 VDD #6 VSS #5 CLK #7 DAT0 #10 NC #3 VSS #2 CMD #1 DAT3 #8 DAT1 #9 DAT2 Packaging RoHS 800 pcs. per reel YES P=1.3 :Card pushed-in for ejection :Card fully inserted :Card ejected miniSD card outline •PCB mounting pattern Card detection switch B Card detection 2 switch A P=1.3±0.03 No conductive traces 1 C Indicates the center line of card slot. Card detection switch When card is ejected When card is inserted CLOSED OPEN Terminal #8 #7 #6 #5 #4 #11 #10 #3 #2 #1 #9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHDS boendinsceocnttionuresd soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. •Reverse Bottom board mounting :Card ejected :Card fully inserted :Card pushed-in for ejection 16 1 3 GND DM2B-DSFW-PEJ-S #10 NC #11 NC #3 VSS #4 VDD #2 CMD

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.
miniSDTM Card Connectors

DM2 Series

Extremely small size Standard top board mounting DM2A
•Features

Extremely small size

Board footprint as well as the length, width and height of the connector has been reduced in order to minimize use of valuable space in today’s miniature devices. With the miniSD card inserted the overall length is shortest in the industry.

Push-in / Push-out card ejection

Inserted card is securely held in place with an approximate force of 4 N, assuring reliable connection and retention in the connector, even when subjected to accidental shock. When pushed again, the card will self-eject to distance of 4 mm, allowing safe removal from the connector.

Protection against card loss

Built-in card retention springs will keep the card inserted when card may be accidentally partially pulled-out.

Effective grounding and shielding

The VSS contacts connect directly to the metal cover, assuring superior ground connection Patents pending. In addition, metal cover will connect with the PC board surface at four points, providing highly effective grounding and shielding of the connector.

Durable, load-resistant construction

While miniature in size and lightweight, the use of metal cover assures it’s reliable and stable performance.

Two-point contact

Two-point contact offers high contact reliability.

Built-in card detection switch

The card detection switch is a normally closed, opening when the card is inserted.

All components and materials comply with the requirements of EU Directive 2002/95/EC.
•Applications

Mobile phones, digital cameras, PDA’s and any other portable device requiring use of miniSDTM memory card.
*miniSDTM is a trademark of the SD Card Association.

Extremely small size

DM2B

Card ejection prevention mechanism

Other suppliers

DM2 Card retention springs

Two-point contact

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHDS boendinsceocnttionuresd soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.
•Product Specifications

Ratings

Current rating 0.5A DC Operating temperature range -25çto +85ç Note 1 Operating humidity range Relative humidity 95% max. Voltage rating 125V AC Storage temperature range -40çto +85ç Note 2 No condensation

Item

Insulation resistance Withstanding voltage Contact resistance Vibration

Humidity

Specification
1000 min. Initial value No flashover or insulation breakdown. max. Initial value No electrical discontinuity of 100 ns or more. Contact resistance max. from initial value Insulation resistance min.

Temperature cycle

Contact resistance max. from initial value Insulation resistance min.

Durability mating/unmating Contact resistance max. from initial value
•Ordering information

DM2 * - * - PEJ - *
1 Series name :DM2 2 Connector type A:Standard receptacle
4 Card ejection code PEJ Push insert/push eject
5 Ground terminal type D1S SMT - at 4 points D1S Through hole at 2 points + SMT at 4 points

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at osanlens erecptroesresntative.
•Standard Top board mounting

DM2A-SFW-PEJ-S

CL No.
609-0010-0
#11 NC
#4 VDD #6 VSS #5 CLK #7 DAT0
#10 NC #3 VSS #2 CMD #1 DAT3
#8 DAT1
#9 DAT2

Packaging RoHS
800 pcs. per reel YES

P=1.3
:Card pushed-in for ejection :Card fully inserted :Card ejected
miniSD card outline
•PCB mounting pattern

Card detection switch B

Card detection 2 switch A

P=1.3±0.03

No conductive traces
1 C Indicates the center line of card slot.

Card detection switch

When card is ejected When card is inserted

CLOSED

OPEN

Terminal
#8 #7 #6 #5 #4 #11 #10 #3 #2 #1 #9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHDS boendinsceocnttionuresd soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.
•Reverse Bottom board mounting
:Card ejected :Card fully inserted :Card pushed-in for ejection 16 1
3 GND

DM2B-DSFW-PEJ-S
#10 NC #11 NC
#3 VSS
#4 VDD
#2 CMD

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM2A-SFW-PEJ-S(03) Datasheet file may be downloaded here without warranties.

Datasheet ID: DM2A-SFW-PEJ-S(03) 636125