DF22-4P-7.92DS

DF22-4P-7.92DS Datasheet

DF22 Series

Part	Datasheet
DF22-4P-7.92DS	DF22-4P-7.92DS (pdf)

Related Parts	Information
DF22-4P-7.92DSA	DF22-4P-7.92DSA
DF22-3P-7.92DS	DF22-3P-7.92DS
DF22-5P-7.92DS	DF22-5P-7.92DS
DF22-3P-7.92DSA	DF22-3P-7.92DSA
DF22-5P-7.92DSA	DF22-5P-7.92DSA
DF22-2P-7.92DS	DF22-2P-7.92DS
DF22-2P-7.92DSA	DF22-2P-7.92DSA
DF22-5S-7.92C	DF22-5S-7.92C
DF22-2S-7.92C	DF22-2S-7.92C

PDF Datasheet Preview
mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed DF22 Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts •Features 30 A maximum current Single position connector can carry current of 30 A with #10 AWG conductor. Please refer to Table #1 for current ratings for multiposition connectors using other conductor sizes. Complete Locking Function Reliable interior lock protects mated connectors from accidental disconnection. Prevention of Incorrect Connections To prevent incorrect connection when using multiple connectors having the same Number of contacts, 3 product types having different mating configurations are available. Molded-in contact retention tabs Handling of terminated contacts during the crimping is easier and avoids entangling of wires, since there are no protruding metal tabs. Prevention of incorrect board placement Built-in posts assure correct connector placement and orientation on the board. Supports encapsulation Connectors can be encapsulated up to 10 mm without affecting the performance. Prevention of Short Circuits Between Adjacent Contacts Each Contact is completely surrounded by the insulator housing electrically isolating it from adjacent contacts. Increased Retention Force of Crimped Contacts and confirmation of complete contact insertion Separate contact retainers are provided for applications where extreme pull-out forces may be applied against the wire or when a visual confirmation of the full contact insertion is required. Full Line of Crimp Socket Contacts Realizing the market needs for multitude of different applications, Hirose has developed several variants of crimp socket contacts and housings. Continuous development is adding different variations. Contact your nearest Hirose Electric representative for latest developments. In-line Connections Connectors can be ordered for in-line cable connections. In addition, assemblies can be placed next to each other allowing 4 position total 2 ∞ 2 in a small space. Listed by UL, C-UL, and TÜV. Prevention of Incorrect Connections ●R Type Guide key right side, Color black ●Standard Type Guide key inside, Color natural ●L Type Guide key left side, Color red The photographs on the left show header the board dip side , the photographs on the right show the socket cable side . The guide key position is indicated in position facing the mating surface of the header. DF22 Series●7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed •Product Specifications Ratings Current rating Voltage rating Number of contacts AWG10 Specification UL/C-UL TÜV •Ordering Information ●Socket, Header DF22 B L - 2 S - C ●Contacts DF22 A - 1416 SCF 1 Series name DF22 2 Form Type Sockets Blank Standard height, standard lock Type I B Long type, standard lock Type III C Long type, ergonomic lock Type IV In-line Plugs Blank With panel stop A Without panel stop 3 Guide key type Blank Inside Color natural R Right side Color black L Left side Color red 4 Number of contacts 1 to 5 5 Connector type Socket Double-row socket Header In-line plug DEP Double-row in-line plug RS/P Retainer 6 Contact pitch mm 7 Type of housing Crimp housing DSA Straight header Right-angle header No letter Retainer 8 Applicable Cable Blank UL1430 A UL1015 9 Applicable Conductor 1416 AWG 14 to AWG 16 1012 AWG 10 to AWG 12 10 Packaging SCF Socket contacts / Reel SC Socket contacts / Bag PCF In-line plug contacts / Reel PC In-line plug contacts / Bag DF22 Series●7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed •Crimp Sockets Standard Type Shown with terminated and installed contacts. 1 Pos. Type 1 Standard lock Shown with terminated and installed contacts. 2 to 5 Pos. A B P=7.92 Type 1 Standard lock Contact No. 1 Cavity No. No. of contacts indicator • Type I Height Standard type, Standard lock Note The part number and CL No. have changed to accommodate the product form change of the 2 to 5 pos. types.

PDF Datasheet Preview

mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed

DF22 Series

Complete Locking Function

Completely enclosed locking system

Protection from shorts circuits between adjacent Contacts
•Features
30 A maximum current

Single position connector can carry current of 30 A with #10 AWG conductor. Please refer to Table #1 for current ratings for multiposition connectors using other conductor sizes.

Complete Locking Function

Reliable interior lock protects mated connectors from accidental disconnection.

Prevention of Incorrect Connections

To prevent incorrect connection when using multiple connectors having the same Number of contacts, 3 product types having different mating configurations are available.

Molded-in contact retention tabs

Handling of terminated contacts during the crimping is easier and avoids entangling of wires, since there are no protruding metal tabs.

Prevention of incorrect board placement

Built-in posts assure correct connector placement and orientation on the board.

Supports encapsulation

Connectors can be encapsulated up to 10 mm without affecting the performance.

Prevention of Short Circuits Between Adjacent Contacts

Each Contact is completely surrounded by the insulator housing electrically isolating it from adjacent contacts.

Increased Retention Force of Crimped Contacts and confirmation of complete contact insertion

Separate contact retainers are provided for applications where extreme pull-out forces may be applied against the wire or when a visual confirmation of the full contact insertion is required.

Full Line of Crimp Socket Contacts

Realizing the market needs for multitude of different applications, Hirose has developed several variants of crimp socket contacts and housings. Continuous development is adding different variations. Contact your nearest Hirose Electric representative for latest developments.

In-line Connections

Connectors can be ordered for in-line cable connections. In addition, assemblies can be placed next to each other allowing 4 position total 2 ∞ 2 in a small space.

Listed by UL, C-UL, and TÜV.

Prevention of Incorrect Connections ●R Type Guide key right side, Color black
●Standard Type Guide key inside, Color natural
●L Type Guide key left side, Color red
*The photographs on the left show header the board dip side , the photographs on the right show the socket cable side .
*The guide key position is indicated in position facing the mating surface of the header.

DF22 Series●7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed
•Product Specifications

Ratings

Current rating

Voltage rating

Number of contacts AWG10

Specification

UL/C-UL

TÜV
•Ordering Information
●Socket, Header

DF22 B L - 2 S - C
●Contacts

DF22 A - 1416 SCF
1 Series name DF22 2 Form Type

Sockets Blank Standard height, standard lock Type I B Long type, standard lock Type III C Long type, ergonomic lock Type IV

In-line Plugs Blank With panel stop A Without panel stop
3 Guide key type Blank Inside Color natural R Right side Color black L Left side Color red
4 Number of contacts 1 to 5
5 Connector type

Socket

Double-row socket

Header

In-line plug

DEP Double-row in-line plug

RS/P Retainer
6 Contact pitch mm
7 Type of housing

Crimp housing

DSA Straight header

Right-angle header

No letter Retainer
8 Applicable Cable Blank UL1430 A UL1015
9 Applicable Conductor 1416 AWG 14 to AWG 16 1012 AWG 10 to AWG 12
10 Packaging SCF Socket contacts / Reel SC Socket contacts / Bag PCF In-line plug contacts / Reel PC In-line plug contacts / Bag

DF22 Series●7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies UL, C-UL and TÜV Listed
•Crimp Sockets Standard Type

Shown with terminated and installed contacts.
1 Pos.

Type 1 Standard lock

Shown with terminated and installed contacts.
2 to 5 Pos.

A B P=7.92

Type 1 Standard lock

Contact No. 1

Cavity No.

No. of contacts indicator
• Type I

Height Standard type, Standard lock

Note The part number and CL No. have changed to accommodate the product form change of the 2 to 5 pos. types.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DF22-4P-7.92DS Datasheet file may be downloaded here without warranties.

Datasheet ID: DF22-4P-7.92DS 636108