AT-2206(46)

AT-2206(46) Datasheet

AT-2200 Series

Part	Datasheet
AT-2206(46)	AT-2206(46) (pdf)

Related Parts	Information
AT-2220(46)	AT-2220(46)
AT-2209(46)	AT-2209(46)
AT-2208(46)	AT-2208(46)
AT-2207(46)	AT-2207(46)
AT-2205(46)	AT-2205(46)
AT-2201(46)	AT-2201(46)
AT-2200-(0)(46)	AT-2200-(0)(46)
AT-2204(46)	AT-2204(46)
AT-2210(40)	AT-2210(40)
AT-2203(40)	AT-2203(40)
AT-2204(40)	AT-2204(40)
AT-2201(40)	AT-2201(40)
AT-2202(40)	AT-2202(40)
AT-2200-(0)(40)	AT-2200-(0)(40)
AT-2220(40)	AT-2220(40)
AT-2207(40)	AT-2207(40)
AT-2209(40)	AT-2209(40)
AT-2205(40)	AT-2205(40)
AT-2206(40)	AT-2206(40)
AT-2208(40)	AT-2208(40)
AT-2210(46)	AT-2210(46)
AT-2202(46)	AT-2202(46)
AT-2203(46)	AT-2203(46)

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. SMT Stripline Mounting Fixed Attenuators AT-2200 Series sFeatures Small Size and Lightweight 4mm x mm x mm max height and weighting only 0.1g. Wide Range of Variations for Each Type of Attenuator Attenuation levels available in 1 dB steps from 0 to 10 dB, and 20 dB for a total of 12 types of variations. Automatic placement Supplied in embossed packaging to allow placement with automatic equipment. Individual piece packaging is also available. sProduct Specifications Ratings Frequency range Characteristic impedance Maximum input power Note DC to 600MHz for AT-2220. DC to 2.5GHz Note 1W Operating temperature Operating humidity -10ç to +65ç 95% max. Item 1.Vibration Characteristic requirement 2.Shock No electrical discontinuity of 1µs or more. No damage, cracks, or parts dislocation. 3.Temperature cycle The test method conforms to MIL-STD-202. sMaterials Component Material Attenuation element Metal film Finish Tin-lead plated Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.5mm, acceleration of 98m/s2, 2 hours in each of the 3 directions. Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature -55ç / +15ç to +35ç / +85ç / +15ç to +35ç Time 30 / 2 to 3 / 30 / 2 to 3 Minutes 5 cycles sDimensions AT-2203 shown 4 sOrdering information 3dB E AT -22 01 40 1.4MAX 1 AX:Fixed attenuator 2 Series name :2200 Series 3 Attenuation 00- 0 dB Through 01 1dB 06 6dB 4 40 RoHS Compliant Soldering areas 04/208093 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS bee MdisocounntintuinedgsoFonix. PeledasAe cttheecnkuthaetoprrosducts status on the Hirose website RoHS search at or contact your Hirose sales representative. sSpecifications Attenuation dB Part number DC~ 1,000~ 2,000~ 1,000MHz 2,000MHz 2,500MHz V.S.W.R Max DC~2,500MHz Mounting surface Characteristic Power Weight temperature ç Max. at time Impedance W of maximum input power AT-2200- 0 40 AT-2201 40 AT-2202 40 AT-2203 40 AT-2204 40 AT-2205 40 AT-2206 40 AT-2207 40 AT-2208 40 AT-2209 40 AT-2210 40 AT-2220 40 20±1.5 DC to 600MHz 1.2 DC to 600MHz Note When ordering packaged on tape and reel, add 06 after the end of the part number. One reel = 1,000 pieces sTypical data AT-2203 40 ATTENUATION Frequency GHz AT-2210 40 ATTENUATION Frequency GHz VSWR Frequency GHz VSWR Frequency GHz 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose oorucnonttiancgt yoFuirxHeidrosAe tstaelens ureaptroesresntative. sMounting and Soldering Recommendations The attenuators can be placed using reflow or manual soldering BRecommended Solder temperature profile qReflow Soldering Temperature Profile Recommendations ç 250 230 200 180 10 sec. max. 90±30 sec. 30 sec. max. 0 Time s Manual Soldering Tip temperature 350ç max. for 3 sec. max. Note 1 Do not touch the ceramic portion with the soldering iron tip. BRecommended Mounting Example Grounding Pattern AT-2200 40 Ceramic Portion Board dotted line portion indicates the position of the pattern. Note This attenuator is intended for a one-time use. Do not re-solder or re-use. 04/208095

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.

SMT Stripline Mounting Fixed Attenuators

AT-2200 Series
sFeatures

Small Size and Lightweight
4mm x mm x mm max height and weighting only 0.1g.

Wide Range of Variations for Each Type of Attenuator

Attenuation levels available in 1 dB steps from 0 to 10 dB, and 20 dB for a total of 12 types of variations.

Automatic placement

Supplied in embossed packaging to allow placement with automatic equipment. Individual piece packaging is also available.
sProduct Specifications

Ratings

Frequency range Characteristic impedance Maximum input power

Note DC to 600MHz for AT-2220.

DC to 2.5GHz Note 1W

Operating temperature Operating humidity
-10ç to +65ç 95% max.

Item 1.Vibration

Characteristic requirement
2.Shock

No electrical discontinuity of 1µs or more. No damage, cracks, or parts dislocation.
3.Temperature cycle

The test method conforms to MIL-STD-202.
sMaterials

Component

Material

Attenuation element Metal film

Finish Tin-lead plated

Conditions

Frequency of 10 to 2000 Hz, overall amplitude of 1.5mm, acceleration of 98m/s2, 2 hours in each of the 3 directions.

Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis.

Temperature -55ç / +15ç to +35ç / +85ç / +15ç to +35ç

Time
30 / 2 to 3
/ 30 / 2 to 3 Minutes
5 cycles
sDimensions

AT-2203 shown 4
sOrdering information
3dB E

AT -22 01 40
1.4MAX
1 AX:Fixed attenuator 2 Series name :2200 Series 3 Attenuation
00- 0 dB Through 01 1dB 06 6dB
4 40 RoHS Compliant

Soldering areas
04/208093

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS bee MdisocounntintuinedgsoFonix. PeledasAe cttheecnkuthaetoprrosducts status on the Hirose website RoHS search at or contact your Hirose sales representative.
sSpecifications

Attenuation dB

Part number DC~
1,000~ 2,000~
1,000MHz 2,000MHz 2,500MHz

V.S.W.R Max DC~2,500MHz

Mounting surface

Characteristic Power

Weight
temperature ç Max. at time

Impedance W
of maximum input power

AT-2200- 0 40

AT-2201 40

AT-2202 40

AT-2203 40

AT-2204 40

AT-2205 40

AT-2206 40

AT-2207 40

AT-2208 40

AT-2209 40

AT-2210 40

AT-2220 40
20±1.5 DC to 600MHz
1.2 DC to 600MHz
Note When ordering packaged on tape and reel, add 06 after the end of the part number. One reel = 1,000 pieces
sTypical data

AT-2203 40

ATTENUATION

Frequency GHz

AT-2210 40

ATTENUATION

Frequency GHz

VSWR

Frequency GHz

VSWR

Frequency GHz
04/2009

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose oorucnonttiancgt yoFuirxHeidrosAe tstaelens ureaptroesresntative.
sMounting and Soldering Recommendations

The attenuators can be placed using reflow or manual soldering

BRecommended Solder temperature profile
qReflow Soldering Temperature Profile Recommendations
ç 250 230
200 180
10 sec. max.
90±30 sec.
30 sec. max.
0 Time s

Manual Soldering Tip temperature 350ç max. for 3 sec. max. Note 1 Do not touch the ceramic portion with the soldering iron tip.

BRecommended Mounting Example

Grounding Pattern

AT-2200 40

Ceramic Portion Board
dotted line portion indicates the position of the pattern.

Note This attenuator is intended for a one-time use. Do not re-solder or re-use.
04/208095

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT-2206(46) Datasheet file may be downloaded here without warranties.

Datasheet ID: AT-2206(46) 636081