JW150D1

JW150D1 Datasheet

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W

Part	Datasheet
JW150D1	JW150D1 (pdf)

PDF Datasheet Preview
Data Sheet April 2008 JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W The JW050D, JW075D, JW100D, and JW150D Power Modules use advanced, surface-mount technology and deliver highquality, efficient, and compact dc-dc conversion. n Distributed power architectures n Workstations n Computer equipment n Communications equipment Options n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Small size mm x mm x mm in. x in. x in. n High power density n High efficiency 72% typical n Low output noise n Constant frequency n Industry-standard pinout n Metal baseplate n 2:1 input voltage range n Overtemperature protection 100 W and 150 W only n Overcurrent and overvoltage protection n Remote sense n Remote on/off n Adjustable output voltage 60% to 110% of VO, nom n Case ground pin n ISO9001 Certified manufacturing facilities n UL* 1950 Recognized, CSA† C22.2 No. 950-95 Certified, and VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Assn. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. The JW050D, JW075D, JW100D, and JW150D Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 20 W to 60 W at a typical full-load efficiency of The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications. JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W Data Sheet April 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage: Continuous: JW050D, JW075D JW100D, JW150D Transient 100 ms JW100D, JW150D only VI, trans I/O Isolation Voltage for 1 minute 1500 The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table. Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability. For additional information on these modules, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS . m/s 800 ft./min. m/s 700 ft./min. m/s 600 ft./min. m/s 500 ft./min. m/s 400 ft./min. m/s 300 ft./min. m/s 200 ft./min. m/s 100 ft./min. m/s NAT. CONV. 20 ft./min. 0 10 20 30 40 50 60 70 80 90 100 LOCAL AMBIENT TEMPERATURE, T A °C 8-1150 C .a Figure Forced Convection Power Derating with No Heat Sink Either Orientation Lineage Power JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W Data Sheet April 2008 Thermal Considerations continued Heat Transfer Without Heat Sinks continued 8 VI = 72 V 6 VI = 54 V VI = 36 V OUTPUT CURRENT, I O A Figure JW050D Power Dissipation vs. Output Current 8-1357 C 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 VI = 72 V VI = 54 V VI = 36 V 8 10 12 14 16 18 20 OUTPUT CURRENT, I O A Figure JW100D Power Dissipation vs. Output Current 8-1355 C VI = 72 V 10 VI = 54 V 8 6 VI = 36 V 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Ordering Information Table Device Codes Input Voltage 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V Output Voltage Output Power 20 W 30 W 40 W 60 W 20 W 30 W 40 W 60 W Remote On/Off Logic Negative Positive Device Code JW050D1 JW075D1 JW100D1 JW150D1 JW050D JW075D JW100D JW150D Data Sheet April 2008 8-1945 C .a Comcode 107430241 107477226 107430274 107430290 107477333 107361396 107477390 107477416 Lineage Power Data Sheet April 2008 JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws Dimensions are in millimeters and inches . Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. D000-c.cvs Figure Longitudinal Heat Sink Figure Transverse Heat Sink D000-d.cvs Lineage Power JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W Data Sheet April 2008 A sia-Pacific Head qu art ers T el +65 6 41 6 4283 World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D rive, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286 Ind ia Head qu arters Tel +91 8 0 28411633 Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved. April 2008 DS99-288EPS Replaces DS99-287EPS

PDF Datasheet Preview

Data Sheet April 2008

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W

The JW050D, JW075D, JW100D, and JW150D Power Modules use advanced, surface-mount technology and deliver highquality, efficient, and compact dc-dc conversion.
n Distributed power architectures n Workstations n Computer equipment n Communications equipment

Options
n Heat sinks available for extended operation n Choice of remote on/off logic configuration
n Small size mm x mm x mm in. x in. x in.
n High power density
n High efficiency 72% typical
n Low output noise
n Constant frequency
n Industry-standard pinout
n Metal baseplate
n 2:1 input voltage range
n Overtemperature protection 100 W and 150 W only
n Overcurrent and overvoltage protection
n Remote sense
n Remote on/off
n Adjustable output voltage 60% to 110% of VO, nom
n Case ground pin
n ISO9001 Certified manufacturing facilities n UL* 1950 Recognized, CSA† C22.2 No. 950-95

Certified, and VDE 0805 EN60950, IEC950 Licensed
n CE mark meets 73/23/EEC and 93/68/EEC
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Assn. This product is intended for integration into end-use equipment.

All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products.

The JW050D, JW075D, JW100D, and JW150D Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 20 W to 60 W at a typical full-load efficiency of

The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W

Data Sheet April 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage:

Continuous:

JW050D, JW075D

JW100D, JW150D

Transient 100 ms JW100D, JW150D only

VI, trans

I/O Isolation Voltage for 1 minute
1500
The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table.

Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability.

For additional information on these modules, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS .
m/s 800 ft./min.
m/s 700 ft./min.
m/s 600 ft./min.
m/s 500 ft./min.
m/s 400 ft./min.
m/s 300 ft./min.
m/s 200 ft./min.
m/s 100 ft./min.
m/s NAT. CONV.
20 ft./min.
0 10 20 30 40 50 60 70 80 90 100

LOCAL AMBIENT TEMPERATURE, T

A °C
8-1150 C .a

Figure Forced Convection Power Derating with

No Heat Sink Either Orientation

Lineage Power

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W

Data Sheet April 2008

Thermal Considerations continued Heat Transfer Without Heat Sinks continued
8 VI = 72 V
6 VI = 54 V

VI = 36 V

OUTPUT CURRENT, I O A

Figure JW050D Power Dissipation vs. Output Current
8-1357 C
15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0

VI = 72 V VI = 54 V

VI = 36 V
8 10 12 14 16 18 20

OUTPUT CURRENT, I O A

Figure JW100D Power Dissipation vs. Output Current
8-1355 C

VI = 72 V 10

VI = 54 V 8
6 VI = 36 V
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Ordering Information

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V

Output Voltage

Output Power 20 W 30 W 40 W 60 W 20 W 30 W 40 W 60 W

Remote On/Off Logic

Negative Positive

Device Code JW050D1 JW075D1 JW100D1 JW150D1 JW050D JW075D JW100D JW150D

Data Sheet April 2008
8-1945 C .a

Comcode 107430241 107477226 107430274 107430290 107477333 107361396 107477390 107477416

Lineage Power

Data Sheet April 2008

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W
Ordering Information continued

Table Device Accessories

Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Dimensions are in millimeters and inches .

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

D000-c.cvs

Figure Longitudinal Heat Sink

Figure Transverse Heat Sink

D000-d.cvs

Lineage Power

JW050D, JW075D, JW100D, JW150D Power Modules dc-dc Converters 36 to 75 Vdc Input, 2 Vdc Output 20 W to 60 W

Data Sheet April 2008

A sia-Pacific Head qu art ers T el +65 6 41 6 4283

World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D rive, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286

Ind ia Head qu arters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved.

April 2008 DS99-288EPS Replaces DS99-287EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JW150D1 Datasheet file may be downloaded here without warranties.

Datasheet ID: JW150D1 645693