HW010A0G1-S

HW010A0G1-S Datasheet

HW006/010/012 Series Power Modules dc-dc Converters

Part	Datasheet
HW010A0G1-S	HW010A0G1-S (pdf)

Related Parts	Information
HW006A6A1Z	HW006A6A1Z
HW010A0F1-SZ	HW010A0F1-SZ
HW010A0F1Z	HW010A0F1Z
HW006A6A1-SZ	HW006A6A1-SZ
HW010A0G1-SZ	HW010A0G1-SZ
HW010A0F	HW010A0F
HW012A0Y1-S	HW012A0Y1-S
HW010A0F1-S	HW010A0F1-S
HW010A0F1	HW010A0F1
HW006A6A1-S	HW006A6A1-S
HW012A0M1-S	HW012A0M1-S
HW012A0P1-S	HW012A0P1-S

PDF Datasheet Preview
Data Sheet HW006/010/012 Series Power Modules dc-dc Converters 36-75Vdc Input Vdc to 5 Vdc Output 6.6A to 12A • Compliant to RoHS EU Directive 2011/65/EU Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions • Delivers up to 6A Output current 5V 4A , 3.3V 5A , 2.5V 1.0V 6A each • High efficiency 89% at 5.0V full load • Low Output voltage- supports migration to future IC supply voltages down to 1.0V • Low output ripple and noise • Wireless Networks • Small Size and low profile • Distributed power architectures • Optical and Access Network Equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications 47.2mm x 29.5mm x 8.5mm x in • Surface mount or Through hole TH • Remote On/Off • Output overcurrent/Over voltage protection Options • Remote On/Off logic positive or negative • Surface Mount -S Suffix • Additional Vout+ pin -3 Suffix • Over temperature protection • Single Tightly regulated output • Output voltage adjustment trim 10% • Wide operating temperature range -40°C to 85°C • Meets the voltage insulation requirements for ETSI 300132-2 and complies with and is Licensed for Basic Insulation rating per EN 60950 • CE mark meets 73/23/EEC and 93/68/EEC directives§ • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities The HW/HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36 Vdc HC or 36 to 75 Vdc HW and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 87% 3.3V/5A, 86% at 2.5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These open frame modules are available either in surface-mount -S or in through-hole form. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 2, 2015 2012 General Electric Company. All rights reserved. Data Sheet HW006/010/012 Series Power Modules dc-dc Converters 36-75Vdc Input Vdc to 5 Vdc Output 6.6A to 12A Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Transient 100ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation Voltage 100% factory tested Device Unit VIN, trans Tstg Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Input Voltage 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc Output Voltage 3.3V 3.3V 3.3V 5.0V 5.0V 1.2V 2.5V 2.5V 3.3V 3.3V 3.3V 3.3V 3.3V 5.0V 5.0V 5.0V Output Current 10A 6.6A 6.6A 12A 10A 5A 10A 6.6A 6.6A 6.6A Efficiency Connector Type Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole SMT tape & reel SMT tape & reel SMT Device Code HW010A0F1 HW010A0F1Z HW010A0F1-43Z HW006A6A1 HW006A6A1Z HW012A0Y1-S HW010A0G1-S HW010A0G1-SZ HW010A0F1-S HW010A0F1-SZ HW010A0F1-SR HW010A0F1-SRZ HW010A0F1-55SR HW006A6A-S HW006A6A1-S HW006A6A1-SZ Comcodes 108967985 CC109107141 150035318 108968355 CC109107133 108968405 108968421 CC109113602 108965625 108995214 108997656 CC109107158 CC109124822 CC109142155 108968363 109100352 Table Device Options Option Negative remote on/off logic Customer specific Customer specific Tape & Reel Surface mount connections RoHS Compliant Suffix 1 -43 -55 -R -S -Z * Please contact GE for availability of these options, samples, minimum order quantity and lead times Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 2, 2015 2012 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

HW006/010/012 Series Power Modules dc-dc Converters
36-75Vdc Input Vdc to 5 Vdc Output 6.6A to 12A
• Compliant to RoHS EU Directive 2011/65/EU Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions
• Delivers up to 6A Output current
5V 4A , 3.3V 5A , 2.5V 1.0V 6A each
• High efficiency 89% at 5.0V full load
• Low Output voltage- supports migration to future IC supply voltages down to 1.0V
• Low output ripple and noise
• Wireless Networks
• Small Size and low profile
• Distributed power architectures
• Optical and Access Network Equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
47.2mm x 29.5mm x 8.5mm x in
• Surface mount or Through hole TH
• Remote On/Off
• Output overcurrent/Over voltage protection

Options
• Remote On/Off logic positive or negative
• Surface Mount -S Suffix
• Additional Vout+ pin -3 Suffix
• Over temperature protection
• Single Tightly regulated output
• Output voltage adjustment trim 10%
• Wide operating temperature range -40°C to 85°C
• Meets the voltage insulation requirements for ETSI 300132-2 and complies with and is Licensed for Basic Insulation rating per EN 60950
• CE mark meets 73/23/EEC and 93/68/EEC directives§
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

The HW/HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36 Vdc HC or 36 to 75 Vdc HW and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 87% 3.3V/5A, 86% at 2.5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These open frame modules are available either in surface-mount -S or in through-hole form.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association.

VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

October 2, 2015
2012 General Electric Company. All rights reserved.

Data Sheet

HW006/010/012 Series Power Modules dc-dc Converters
36-75Vdc Input Vdc to 5 Vdc Output 6.6A to 12A

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Transient 100ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation Voltage 100% factory tested

Device

Unit

VIN, trans

Tstg
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Input Voltage
36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc 36 75 Vdc

Output Voltage
3.3V 3.3V 3.3V 5.0V 5.0V 1.2V 2.5V 2.5V 3.3V 3.3V 3.3V 3.3V 3.3V 5.0V 5.0V 5.0V

Output Current
10A 6.6A 6.6A 12A 10A 5A 10A 6.6A 6.6A 6.6A

Efficiency

Connector Type

Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole

SMT tape & reel SMT tape & reel SMT

Device Code

HW010A0F1 HW010A0F1Z HW010A0F1-43Z HW006A6A1 HW006A6A1Z HW012A0Y1-S HW010A0G1-S HW010A0G1-SZ HW010A0F1-S HW010A0F1-SZ HW010A0F1-SR HW010A0F1-SRZ HW010A0F1-55SR HW006A6A-S HW006A6A1-S HW006A6A1-SZ

Comcodes
108967985 CC109107141
150035318 108968355 CC109107133 108968405 108968421 CC109113602 108965625 108995214 108997656 CC109107158 CC109124822 CC109142155 108968363 109100352

Table Device Options

Option Negative remote on/off logic Customer specific Customer specific Tape & Reel Surface mount connections RoHS Compliant

Suffix 1 -43 -55 -R -S -Z
* Please contact GE for availability of these options, samples, minimum order quantity and lead times

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 2, 2015
2012 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HW010A0G1-S Datasheet file may be downloaded here without warranties.

Datasheet ID: HW010A0G1-S 645659