HW006A0M1-S

HW006A0M1-S Datasheet

Parameter Calculated MTBF for HW005A0F1-S in accordance with Lucent RIN 6 IO=80% of IO, max, TA=25°C, airflow=1m/s Weight

Part	Datasheet
HW006A0M1-S	HW006A0M1-S (pdf)

Related Parts	Information
HW005A0F1-SR	HW005A0F1-SR
HW006A0G1-S	HW006A0G1-S

PDF Datasheet Preview
Data Sheet June 15, 2006 HW/HC004/005/006 Series DC-DC Converter Power Modules 18-36V & 36-75Vdc Input 1.0V-5Vdc Output 4A-6A Output Current Wireless Networks Distributed power architectures Optical and Access Network Equipment Enterprise Networks Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications Options Remote On/Off logic positive or negative Surface Mount -S Suffix Approved for Basic Insulation -B suffix Additional Vout+ pin -3 Suffix Compliant to RoHS EU Directive 2002/95/EC -Z versions Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption non-Z versions Delivers up to 6A Output current 5V 4A , 3.3V 5A , 2.5V 1.0V 6A each High efficiency 89% at 5.0V full load Low Output voltage- supports migration to future IC supply voltages down to 1.0V Low output ripple and noise Small Size and low profile 47.2mm x 29.5mm x 8.5mm x in Surface mount or Through hole TH Remote On/Off Output overcurrent/Over voltage protection Over temperature protection Single Tightly regulated output Output voltage adjustment trim ±10% Wide operating temperature range -40°C to 85°C Meets the voltage insulation requirements for ETSI 300-132-2 and complies with and is Licensed for Basic Insulation rating per EN 60950 CE mark meets 73/23/EEC and 93/68/EEC directives§ UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and 0805:2001-12 EN60950-1 Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities The HW/HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36 Vdc HC or 36 to 75 Vdc HW and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 87% 3.3V/5A, 86% at 2.5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These open frame modules are available either in surface-mount -S or in through-hole form. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Document No DS03-017 ver.1.0 PDF No hw-hc_4-6a.pdf Data Sheet June 15, 2006 HW/HC004/005/006 Series DC-DC Power Module 18-36Vdc & 36-75Vdc Input 1.0V-5Vdc Output 4A - 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Transient 100ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation Voltage Device VIN, trans Tstg Max 50 80 100 85 125 2250 Unit Vdc °C °C Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN=0V to 75V, IO=IO, max Inrush Transient Input Reflected Ripple Current, peak-to-peak 5Hz to 20MHz, 12uH source impedance VIN=0V to 75V, IO= IOmax see Figure 9 Input Ripple Rejection 120Hz EMC, EN55022 Device HC HW HC HW All Symbol Min Unit Ordering Information Please contact your Tyco Electronics’ Sales Representative for pricing, availability and optional features. Table Device Codes Product codes HW004A0A-S HW004A0A-SZ HW004A0A1-S HW004A0A1Z HW004A0A1-SB HW004A0A1-SR HW004A0A1-SZ HW004A0A1-SBZ HW004A0A31-S HW005A0F-S HW005A0F-SR HW005A0F-SZ HW005A0F-SR39* HW005A0F1 HW005A0F1Z HW005A0F1-S HW005A0F1-SR HW005A0F1-SZ HW005A0F1-SRZ HW005A0F1-S65* HW005A0F1-S65Z* HW005A0F1-SR65* HW005A0F31-S HW006A0G1-S HW006A0G1-SZ HW006A0D1-S HW006A0D1-SZ HW006A0Y-S HW006A0Y1-S HW006A0Y1-SR HW006A0Y1-SZ HW006A0M1-S HW006A0M1-SZ HW006A0P1-S HW006A0P1-SZ HW006A0S1R01-S HC004A0A1-S HC004A0A1-SZ HC005A0F1-S HC005A0F1-SZ Input Voltage 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 24 Vdc 24 Vdc 24 Vdc 24 Vdc Output Voltage 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 2.5V 2.5V 2.0V 2.0V 1.8V 1.8V 1.8V 1.8V 1.5V 1.5V 1.2V 1.2V 1.0V 5.0V 5.0V 3.3V 3.3V Output Current 4A 5A 6A 4A 5A Remote On/Off Logic Positive Negative Positive Negative Positive Negative Connector Type SMT Through-Hole SMT Through-Hole SMT tape & reel SMT tape & reel SMT tape & reel Through-Hole Through-Hole SMT tape&reel SMT tape&reel SMT tape & reel SMT tape&reel SMT Comcodes 108968272 109100245 108965476 108960634 CC109102002 108980525 108985060 109100237 CC109114105 108968975 108968678 108984394 109100261 108986951 108967779 CC109107125 108960667 108985052 108995197 109100253 108987512 108995206 108987488 108968967 108960774 109100311 108969676 109100303 108974957 108960782 108985078 109100344 108963893 109100328 108963901 109100336 108963927 108960642 108996113 108960659 108996121 Tyco Electronics Power Systems Data Sheet June 15, 2006 HW/HC004/005/006 Series DC-DC Power Module 18-36Vdc & 36-75Vdc Input 1.0V-5Vdc Output 4A - 6A Output Current Table Device Options Option Negative remote on/off logic With additional Vout+ pin3 Customer specific Customer specific Approved for Basic Insulation Tape & Reel Surface mount connections RoHS Compliant Suffix 1 3 -39 -65 -B -R -S -Z * Please contact Tyco Electronics Sales Representative for availability of these options, samples, minimum order quantity and lead times World Wide Headquarters Tyco Electronics Power Systems, Inc. 3000 Skyline Drive, Mesquite, TX 75149, USA +1-800-843-7497 Outside U.S.A. +1-972-284-2626 e-mail: Europe, Middle-East and Africa Headquarters Tyco Electronics UK Ltd Tel +44 0 1344 469 300 Latin America, Brazil, Caribbean Headquarters Tyco Electronics Power Systems Tel +56 2 209 8211 India Headquarters Tyco Electronics Systems India Pte. Ltd. Tel +91 80 841 1633 x3001 Asia-Pacific Headquarters Tyco Electronics Singapore Pte. Ltd. Tel +65 6416 4283 Tyco Electronics Corporation reserves the right to make changes to the product s or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. 2003 Tyco Electronics Power Systems, Inc., Mesquite, Texas All International Rights Reserved. Document No DS03-017 ver.1.0 PDF No hw-hc_4-6a.pdf

PDF Datasheet Preview

Data Sheet June 15, 2006

HW/HC004/005/006 Series DC-DC Converter Power Modules 18-36V & 36-75Vdc Input 1.0V-5Vdc Output 4A-6A Output Current

Wireless Networks Distributed power architectures Optical and Access Network Equipment Enterprise Networks Latest generation IC’s DSP, FPGA, ASIC
and Microprocessor powered applications

Options

Remote On/Off logic positive or negative Surface Mount -S Suffix Approved for Basic Insulation -B suffix Additional Vout+ pin -3 Suffix

Compliant to RoHS EU Directive 2002/95/EC -Z versions

Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption non-Z versions

Delivers up to 6A Output current
5V 4A , 3.3V 5A , 2.5V 1.0V 6A each High efficiency 89% at 5.0V full load Low Output voltage- supports migration to future IC
supply voltages down to 1.0V Low output ripple and noise Small Size and low profile
47.2mm x 29.5mm x 8.5mm
x in Surface mount or Through hole TH Remote On/Off Output overcurrent/Over voltage protection Over temperature protection Single Tightly regulated output

Output voltage adjustment trim ±10% Wide operating temperature range -40°C to 85°C Meets the voltage insulation requirements for ETSI
300-132-2 and complies with and is Licensed for Basic Insulation rating per EN 60950 CE mark meets 73/23/EEC and 93/68/EEC directives§ UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and 0805:2001-12 EN60950-1 Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities

The HW/HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36 Vdc HC or 36 to 75 Vdc HW and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 87% 3.3V/5A, 86% at 2.5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These open frame modules are available either in surface-mount -S or in through-hole form.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards

Document No DS03-017 ver.1.0 PDF No hw-hc_4-6a.pdf

Data Sheet June 15, 2006

HW/HC004/005/006 Series DC-DC Power Module 18-36Vdc & 36-75Vdc Input 1.0V-5Vdc Output 4A - 6A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Transient 100ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation Voltage

Device

VIN, trans

Tstg

Max 50 80 100 85
125 2250

Unit Vdc °C
°C Vdc

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage

Maximum Input Current VIN=0V to 75V, IO=IO, max Inrush Transient Input Reflected Ripple Current, peak-to-peak 5Hz to 20MHz, 12uH source impedance VIN=0V to 75V, IO= IOmax see Figure 9 Input Ripple Rejection 120Hz

EMC, EN55022

Device HC HW HC HW All

Symbol Min

Unit
Ordering Information

Please contact your Tyco Electronics’ Sales Representative for pricing, availability and optional features.

Table Device Codes

Product codes

HW004A0A-S HW004A0A-SZ HW004A0A1-S HW004A0A1Z HW004A0A1-SB HW004A0A1-SR HW004A0A1-SZ HW004A0A1-SBZ HW004A0A31-S HW005A0F-S HW005A0F-SR HW005A0F-SZ HW005A0F-SR39* HW005A0F1 HW005A0F1Z HW005A0F1-S HW005A0F1-SR HW005A0F1-SZ HW005A0F1-SRZ HW005A0F1-S65* HW005A0F1-S65Z* HW005A0F1-SR65* HW005A0F31-S HW006A0G1-S HW006A0G1-SZ HW006A0D1-S HW006A0D1-SZ HW006A0Y-S HW006A0Y1-S HW006A0Y1-SR HW006A0Y1-SZ HW006A0M1-S HW006A0M1-SZ HW006A0P1-S HW006A0P1-SZ HW006A0S1R01-S HC004A0A1-S HC004A0A1-SZ HC005A0F1-S HC005A0F1-SZ

Input Voltage
48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 48 Vdc 24 Vdc 24 Vdc 24 Vdc 24 Vdc

Output Voltage
5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 2.5V 2.5V 2.0V 2.0V 1.8V 1.8V 1.8V 1.8V 1.5V 1.5V 1.2V 1.2V 1.0V 5.0V 5.0V 3.3V 3.3V

Output Current
4A 5A 6A 4A 5A

Remote On/Off Logic Positive Negative Positive Negative Positive Negative

Connector Type

SMT Through-Hole SMT Through-Hole SMT tape & reel SMT tape & reel SMT tape & reel Through-Hole Through-Hole SMT tape&reel SMT tape&reel SMT tape & reel SMT tape&reel SMT

Comcodes
108968272 109100245 108965476 108960634 CC109102002 108980525 108985060 109100237 CC109114105 108968975 108968678 108984394 109100261 108986951 108967779 CC109107125 108960667 108985052 108995197 109100253 108987512 108995206 108987488 108968967 108960774 109100311 108969676 109100303 108974957 108960782 108985078 109100344 108963893 109100328 108963901 109100336 108963927 108960642 108996113 108960659 108996121

Tyco Electronics Power Systems

Data Sheet June 15, 2006

HW/HC004/005/006 Series DC-DC Power Module 18-36Vdc & 36-75Vdc Input 1.0V-5Vdc Output 4A - 6A Output Current

Table Device Options

Option

Negative remote on/off logic With additional Vout+ pin3 Customer specific Customer specific Approved for Basic Insulation Tape & Reel Surface mount connections RoHS Compliant

Suffix
1 3 -39 -65 -B -R -S -Z
* Please contact Tyco Electronics Sales Representative for availability of these options, samples, minimum order quantity and lead times

World Wide Headquarters Tyco Electronics Power Systems, Inc. 3000 Skyline Drive, Mesquite, TX 75149, USA +1-800-843-7497 Outside U.S.A. +1-972-284-2626 e-mail:

Europe, Middle-East and Africa Headquarters Tyco Electronics UK Ltd Tel +44 0 1344 469 300

Latin America, Brazil, Caribbean Headquarters Tyco Electronics Power Systems Tel +56 2 209 8211

India Headquarters Tyco Electronics Systems India Pte. Ltd. Tel +91 80 841 1633 x3001

Asia-Pacific Headquarters Tyco Electronics Singapore Pte. Ltd. Tel +65 6416 4283

Tyco Electronics Corporation reserves the right to make changes to the product s or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.
2003 Tyco Electronics Power Systems, Inc., Mesquite, Texas All International Rights Reserved.

Document No DS03-017 ver.1.0 PDF No hw-hc_4-6a.pdf

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HW006A0M1-S Datasheet file may be downloaded here without warranties.

Datasheet ID: HW006A0M1-S 645657