EHW015A0A41Z

EHW015A0A41Z Datasheet

EHW015A0A Series Eighth-Brick Power Modules

Part	Datasheet
EHW015A0A41Z	EHW015A0A41Z (pdf)

Related Parts	Information
EHW015A0A41-HZ	EHW015A0A41-HZ

PDF Datasheet Preview
Data Sheet EHW015A0A Series Eighth-Brick Power Modules Input 5.0Vdc Output 15A Output Current • Compliant to RoHS EU Directive 2011/65/EU Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions • Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption non-Z versions • High efficiency 92% at 5.0V full load Vin=48Vdc • Industry standard, DOSA compliant footprint 58.4mm x 22.8mm x 7.77mm in x in x in • Low profile height and reduced component skyline • Distributed Power Architectures • Wide input voltage range 36-75 Vdc • Tightly regulated output • Wireless Network Infrastructure • Constant switching frequency • Access and Optical Network Equipment • Positive remote On/Off logic • Enterprise Networks, including Power over Ethernet PoE • Input under/over voltage protection • Output overcurrent and overvoltage protection Options • Over-temperature protection • Negative Remote On/Off logic • Remote sense Auto-restart • Output Voltage adjust 90% to 112% of Vo,nom • Surface Mount version -S • Wide operating temperature range -40°C to 85°C • Suitable for cold wall cooling using suitable Gap Pad applied directly to top side of module • ULRecognized to UL60950-1, CAN/CSA† C22.2 No.60950-1, and EN60950-1 VDE 0805-1 Licensed • CE mark meets 2006/95/EC directive§ • Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1 • 2250 Vdc Isolation tested in compliance with IEEE PoE standards • ISO*9001 and ISO 14001 certified manufacturing facilities The EHW015A0A, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 15A of output current and provide a precisely regulated output voltage of 5.0V over a wide range of input voltages VIN = 36 75Vdc . The modules achieve typical full load efficiency of The open frame modules construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. October 1, 2015 2012 General Electric Company. All rights reserved. Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Product Codes EHW015A0A1 Input Voltage 48V 36-75Vdc Output Voltage 5.0V Output Current On/Off Logic Negative Connector Type Through hole EHW015A0A41Z 48V 36-75Vdc 5.0V Negative Through hole EHW015A0A41-HZ 48V 36-75Vdc 5.0V Negative Through hole EHW015A0A41-SZ 48V 36-75Vdc 5.0V Negative Surface mount Comcodes CC109150587 CC109141818 CC109146387 CC109146395 Table Device Coding Scheme and Options Ratings Characteristic Form Factor Family Designator Input Voltage Output Current Output Voltage Character and Position E H W 015A0 A Pin Length Action following Protective Shutdown On/Off logic Definition E = Eighth Brick W = Wide Input Voltage Range, 36V -75V 015A0 = Amps Rated Output Current A = Vout Nominal Omit = No Pin Trim 6 = Pin Length mm ± 0.25mm , in. ± in. 8 = Pin Length mm ± 0.25mm , in. ± in. Omit = Latching Mode 4 = Auto-restart following shutdown Overcurrent/Overvoltage Omit = Positive Logic 1 = Negative Logic Options Customer Specific Mechanical Features RoHS XY = Customer Specific Modified Code, Omit for Standard Code Omit = Standard open Frame Module

PDF Datasheet Preview

Data Sheet

EHW015A0A Series Eighth-Brick Power Modules

Input 5.0Vdc Output 15A Output Current
• Compliant to RoHS EU Directive 2011/65/EU Z versions
• Compliant to RoHS EU Directive 2011/65/EU under
exemption 7b Lead solder exemption . Exemption 7b
will expire after June 1, 2016 at which time this
produc twill no longer be RoHS compliant non-Z
versions
• Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption non-Z versions
• High efficiency 92% at 5.0V full load Vin=48Vdc
• Industry standard, DOSA compliant footprint
58.4mm x 22.8mm x 7.77mm
in x in x in
• Low profile height and reduced component skyline
• Distributed Power Architectures
• Wide input voltage range 36-75 Vdc
• Tightly regulated output
• Wireless Network Infrastructure
• Constant switching frequency
• Access and Optical Network Equipment
• Positive remote On/Off logic
• Enterprise Networks, including Power over Ethernet PoE
• Input under/over voltage protection
• Output overcurrent and overvoltage protection

Options
• Over-temperature protection
• Negative Remote On/Off logic
• Remote sense

Auto-restart
• Output Voltage adjust 90% to 112% of Vo,nom
• Surface Mount version -S
• Wide operating temperature range -40°C to 85°C
• Suitable for cold wall cooling using suitable Gap Pad applied directly to top side of module
• UL*Recognized to UL60950-1, CAN/CSA† C22.2 No.60950-1, and EN60950-1 VDE 0805-1 Licensed
• CE mark meets 2006/95/EC directive§
• Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1
• 2250 Vdc Isolation tested in compliance with IEEE PoE standards
• ISO**9001 and ISO 14001 certified manufacturing facilities

The EHW015A0A, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 15A of output current and provide a precisely regulated output voltage of 5.0V over a wide range of input voltages VIN = 36 75Vdc . The modules achieve typical full load efficiency of The open frame modules construction, available in
both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection.

October 1, 2015
2012 General Electric Company. All rights reserved.
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Product Codes EHW015A0A1

Input Voltage 48V 36-75Vdc

Output Voltage
5.0V

Output Current

On/Off Logic Negative

Connector Type

Through hole

EHW015A0A41Z
48V 36-75Vdc
5.0V

Negative

Through hole

EHW015A0A41-HZ
48V 36-75Vdc
5.0V

Negative

Through hole

EHW015A0A41-SZ
48V 36-75Vdc
5.0V

Negative

Surface mount

Comcodes

CC109150587 CC109141818 CC109146387 CC109146395

Table Device Coding Scheme and Options

Ratings

Characteristic

Form Factor Family Designator Input Voltage Output Current Output Voltage

Character and Position

E H W 015A0 A

Pin Length

Action following Protective Shutdown On/Off logic

Definition E = Eighth Brick

W = Wide Input Voltage Range, 36V -75V 015A0 = Amps Rated Output Current A = Vout Nominal Omit = No Pin Trim 6 = Pin Length mm ± 0.25mm , in. ± in. 8 = Pin Length mm ± 0.25mm , in. ± in. Omit = Latching Mode 4 = Auto-restart following shutdown Overcurrent/Overvoltage Omit = Positive Logic 1 = Negative Logic

Options

Customer Specific Mechanical Features RoHS

XY = Customer Specific Modified Code, Omit for Standard Code Omit = Standard open Frame Module

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EHW015A0A41Z Datasheet file may be downloaded here without warranties.

Datasheet ID: EHW015A0A41Z 645632