ATH010A0X3-SR

ATH010A0X3-SR Datasheet

ATH010A0X3-SR ATH010A0X3-SRZ ATH010A0X43-SR ATH010A0X43-SRZ

Part	Datasheet
ATH010A0X3-SR	ATH010A0X3-SR (pdf)

Related Parts	Information
ATH010A0X43-SRZ	ATH010A0X43-SRZ
ATH010A0X43-SR	ATH010A0X43-SR

PDF Datasheet Preview
Data Sheet Austin LynxTMII SMT Non-Isolated DC-DC Power Modules 2.4Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Flexible output voltage sequencing EZ-SEQUENCETM • Delivers up to 10A output current • High efficiency 95% at 3.3V full load VIN = 5.0V • Small size and low profile: mm x mm x mm in x in x in • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications • Low output ripple and noise • High Reliability: Calculated MTBF = 15.7M hours at 25oC Full-load • Constant switching frequency 300 kHz • Output voltage programmable from Vdc to 3.63Vdc via external resistor • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Remote sense • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin LynxTM II SMT surface mount technology power modules are non-isolated DC-DC converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The Austin LynxTM II series has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple voltages on a board. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 2, 2015 2015 General Electric Company. All rights reserved. Data Sheet Austin LynxTMII SMT Non-Isolated DC-DC Power Modules 2.4Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit Vseq VIN,max Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN=2.4V to 5.5V, IO=IO, max Input No Load Current VIN = 5.0Vdc, IO = 0, module enabled Input Stand-by Current VIN = 5.0Vdc, module disabled Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code Input Voltage Range Output Voltage Output Efficiency Current 10A On/Off Logic ATH010A0X3-SR ATH010A0X3-SRZ ATH010A0X43-SR ATH010A0X43-SRZ 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc 95% 95% 95% 95% Negative Positive Connector Type Comcodes 108987520 CC109104543 108988333 108996823 -Z refers to RoHS compliant codes Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 2, 2015 2015 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

Austin LynxTMII SMT Non-Isolated DC-DC Power Modules
2.4Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCETM
• Delivers up to 10A output current
• High efficiency 95% at 3.3V full load VIN = 5.0V
• Small size and low profile:
mm x mm x mm in x in x in
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
• Low output ripple and noise
• High Reliability:

Calculated MTBF = 15.7M hours at 25oC Full-load
• Constant switching frequency 300 kHz
• Output voltage programmable from Vdc to 3.63Vdc
via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote sense
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin LynxTM II SMT surface mount technology power modules are non-isolated DC-DC converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The Austin LynxTM II series has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple voltages on a board.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

October 2, 2015
2015 General Electric Company. All rights reserved.

Data Sheet

Austin LynxTMII SMT Non-Isolated DC-DC Power Modules
2.4Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Unit

Vseq

VIN,max

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN=2.4V to 5.5V, IO=IO, max Input No Load Current

VIN = 5.0Vdc, IO = 0, module enabled

Input Stand-by Current VIN = 5.0Vdc, module disabled
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes

Device Code

Input Voltage Range

Output Voltage

Output Efficiency Current 10A

On/Off Logic

ATH010A0X3-SR ATH010A0X3-SRZ ATH010A0X43-SR ATH010A0X43-SRZ
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc
95% 95% 95% 95%

Negative Positive

Connector Type

Comcodes
108987520 CC109104543
108988333 108996823
-Z refers to RoHS compliant codes

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 2, 2015
2015 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH010A0X3-SR Datasheet file may be downloaded here without warranties.

Datasheet ID: ATH010A0X3-SR 645596