ATH010A0X43Z

ATH010A0X43Z Datasheet

ATH010A0X3 ATH010A0X43 ATH010A0X3Z ATH010A0X43Z

Part	Datasheet
ATH010A0X43Z	ATH010A0X43Z (pdf)

Related Parts	Information
ATH010A0X43	ATH010A0X43
ATH010A0X3	ATH010A0X3

PDF Datasheet Preview
Data Sheet Austin LynxTMII SIP Non-Isolated DC-DC Power Modules 2.4Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Flexible output voltage sequencing EZ-SEQUENCETM • Delivers up to 10A output current EZ-SEQUENCETM • High efficiency 95% at 3.3V full load VIN = 5.0V • Small size and low profile: • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications mm x mm x mm • in x in x in • Low output ripple and noise • High Reliability: Calculated MTBF = 15.7M hours at 25oC Full-load • Constant switching frequency 300 kHz • Output voltage programmable from Vdc to 3.63Vdc via external resistor • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Remote sense • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin LynxTM II SIP power modules are non-isolated DC-DC converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The Austin LynxTM II series has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple voltages on a board. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 2, 2015 2015 General Electric Company. All rights reserved. Data Sheet Austin LynxTMII SIP Non-Isolated DC-DC Power Modules 2.4Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit Vseq VIN,max Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN=2.4V to 5.5V, IO=IO, max Input No Load Current VIN = 5.0Vdc, IO = 0, module enabled Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code Input Voltage Range ATH010A0X3 ATH010A0X43 ATH010A0X3Z ATH010A0X43Z 5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc Output Voltage 3.63Vdc 3.63Vdc 3.63Vdc 3.63Vdc Output Current 10 A 10 A 10 A 10 A Efficiency 10A Connector Type Comcodes 108989075 108989083 CC109104733 CC109104741 -Z refers to RoHS compliant Versions Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 2, 2015 2015 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

Austin LynxTMII SIP Non-Isolated DC-DC Power Modules
2.4Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCETM
• Delivers up to 10A output current

EZ-SEQUENCETM
• High efficiency 95% at 3.3V full load VIN = 5.0V
• Small size and low profile:
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
mm x mm x mm
• in x in x in
• Low output ripple and noise
• High Reliability:

Calculated MTBF = 15.7M hours at 25oC Full-load
• Constant switching frequency 300 kHz
• Output voltage programmable from Vdc to
3.63Vdc via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote sense
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin LynxTM II SIP power modules are non-isolated DC-DC converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The Austin LynxTM II series has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple voltages on a board.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

October 2, 2015
2015 General Electric Company. All rights reserved.

Data Sheet

Austin LynxTMII SIP Non-Isolated DC-DC Power Modules
2.4Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Unit

Vseq

VIN,max

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN=2.4V to 5.5V, IO=IO, max Input No Load Current

VIN = 5.0Vdc, IO = 0, module enabled
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Device Code

Input Voltage Range

ATH010A0X3 ATH010A0X43 ATH010A0X3Z ATH010A0X43Z
5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc

Output Voltage
3.63Vdc 3.63Vdc 3.63Vdc 3.63Vdc

Output Current
10 A 10 A 10 A 10 A

Efficiency 10A

Connector Type

Comcodes
108989075 108989083 CC109104733 CC109104741
-Z refers to RoHS compliant Versions

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 2, 2015
2015 General Electric Company. All International rights reserved.

Version

More datasheets: DDMV-50P-N-K127 | IRAC1168-DFET | 430779-512 | C2028.12.04 | C2117.21.19 | C2117.12.19 | C2103.12.08 | C2028.21.04 | C2103.21.08 | MDM-25PH004K

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH010A0X43Z Datasheet file may be downloaded here without warranties.

Datasheet ID: ATH010A0X43Z 645595