PCA9633DEMO

PCA9633DEMO Datasheet

PCA9633 Demo Board

Part	Datasheet
PCA9633DEMO	PCA9633DEMO (pdf)

PDF Datasheet Preview
PCA9633 Demo Board PCA-9633 I2C-bus 4-bit LED Driver Individual and Global Brightness Control The PCA9633 Demo Board demonstrates the NXP PCA9633 Fast Mode Plus 4-bit LED Driver IC. Four LEDs are connected to the PCA9633 and through individual pulse width modulation PWM of each LED show different levels of intensity. The board supports six different modes of operation including color wash and random color. The on-board Flash microcontroller is also user reprogrammable for endless variations of functionality. Highlights • 1 MHz and 30mA output allows faster data updates and / or more capacitive busses • 4 Individually controlled 25mA open drain or push-pull outputs OFF, ON, DIM, or DIM with Global Control for LED dimming / blinking • /OE input pin also allows hardware dimming / blinking • Up to 7 address pins allows 128 I2C addresses • 4 software programmable I2C addresses allows controlling groups of devices with single software command sequence • If the battery is low, the red LED will flash every 3 seconds as a warning Specifications • 6 Different Modes of Operation • Auto Demonstration Mode • Color Wash Mode • Random Color Mode • User Color Mode • Multiple Card Chase Mode • Output Enable Control Mode • Includes high-current FET drivers for off board LED circuitry • Power can be supplied by either the onboard 9VDC battery or through the external power connector • Daisy chain boards for synchronous control by a single I2C master Ordering Information Part Number PCA9633DEMO Order Online Now at: Warranty 30-day money back guarantee Availability Stock 256 883-1241 FAX All brand names and product names are trademarks or registered trademarks of their respective holders.

PDF Datasheet Preview

PCA9633 Demo Board

PCA-9633

I2C-bus 4-bit LED Driver Individual and Global Brightness Control

The PCA9633 Demo Board demonstrates the NXP PCA9633 Fast Mode Plus 4-bit LED Driver IC. Four LEDs are connected to the PCA9633 and through individual pulse width modulation PWM of each LED show different levels of intensity.

The board supports six different modes of operation including color wash and random color. The on-board Flash microcontroller is also user reprogrammable for endless variations of functionality.

Highlights
• 1 MHz and 30mA output allows faster data updates and / or more capacitive busses
• 4 Individually controlled 25mA open drain or push-pull outputs OFF, ON, DIM, or DIM with Global Control for LED dimming / blinking
• /OE input pin also allows hardware dimming / blinking
• Up to 7 address pins allows 128 I2C addresses
• 4 software programmable I2C addresses allows controlling groups of devices with single software command sequence
• If the battery is low, the red LED will flash every 3 seconds as a warning

Specifications
• 6 Different Modes of Operation
• Auto Demonstration Mode
• Color Wash Mode
• Random Color Mode
• User Color Mode
• Multiple Card Chase Mode
• Output Enable Control Mode
• Includes high-current FET drivers for off board LED circuitry
• Power can be supplied by either the onboard 9VDC battery or through the external power connector
• Daisy chain boards for synchronous control by a single I2C master
Ordering Information

Part Number PCA9633DEMO Order Online Now at:

Warranty 30-day money back guarantee Availability Stock
256 883-1241 FAX

All brand names and product names are trademarks or registered trademarks of their respective holders.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PCA9633DEMO Datasheet file may be downloaded here without warranties.

Datasheet ID: PCA9633DEMO 635707